Reviews Fasteners And Anchors
#8 Self Drilling Drywall Plastic Anchors Screws for Drywall - Equipped with 25 1.5 Inch Wall Anchors and 25 Stainless Steelscrews, Hanging 75 Pounds No Pre Drill Hole Preparation Required
- ANCHORS MADE OF FIBERGLASS REINFORCED NYLON:Although most gypsum board anchors are made of ordinary plastic, our anchors use tough glass fiber reinforced nylon. Using our drywall screw kits, the cracked style is designed so that you will not feel frustrated by breaking or peeling off when installing the fasteners..
- EASY TO USE: Our wall screw retainers are very easy to use. They are self-tapping screws and do not require pre-drilled or pilot holes. Since you only need a drill bit, you can install as many products as you like on plasterboard and drywall. They are great for hanging bathroom and kitchen accessories, shelves, lights, mirrors, picture frames, curtain rods and small decorative shelves, note that they are not suitable for use in concrete and brick wall.
- FIRM: Frequent use of drywall anchors, you are always worried that they may be pulled out or fail because they are not strong. With durable reinforced nylon structure and 50 pounds of fixing strength, our anchor points are very strong..
- NEW DESIGN: Deep Thread Design: Self-diamond drywall anchors with a deep thread design can be used securely on drywall.
Check Stockpush pin pliers, heavy duty push pin pliers push pin pliers-30 Degree Push Pin Remover Tool Pliers for Retainer & Anchor Removal
- [Perfect Design and Easy To Use]- 30 and 80-degree spring-loaded design allows you to safely remove push pin style fasteners without damaging the surround trim and fasteners, and the ergonomic handle prevents hand fatigue during long term use..
- [Reliable and Efficient]- Do not waste your time by using a screwdriver that damages your vehicle, Push Pin Removal Pliers Set is designed to work in tight spaces to enable you to remove those center locking pin style fasteners with ease..
- [Widely Applications]- Our push pin pliers work on anchors that are found in many makes and models including , , , , , and many other late model vehicles..
- Push Pin Removal Pliers Set is the perfect tool for removing center locking pin style fasteners..
- If you have any questions, our customer service will reply to you within 24 hours..
Check StockBOSCH GDS18V-221N 18V EC Brushless 1/2 In. Impact Wrench with Friction Ring and Thru-Hole (Bare Tool)
- Impact wrench design – built to deliver high torque for tightening such fasteners as lag bolts, concrete anchors and lug nuts.
- Powerful motor – delivers up to 221 Ft. -Lbs. of torque to drive large fasteners quickly.
- Auto Bolt Release – stops rotation when there is no torque on tool to prevent accidentally dropping bolts and nuts during removal.
- Delivers 221 Ft. -Lbs. of torque – ideal for fast tightening and removing of heavy-duty fasteners.
- Compact tool design – weighs only 2. 77 Lbs. (tool only, not including battery) and has a 6. 4 In. head length.
Check StockABN Right Angle Cutting Pliers - Spring Loaded Flush Cut Pliers for Automotive or Crafting - Car Push Retainer Rivet Trim Clip Wire Cutting Tool
- These pliers feature a superior long reach design for work in confined areas.
- [Perfect Design and Easy To Use]- 30 and 80-degree spring-loaded design allows you to safely remove push pin style fasteners without damaging the surround trim and fasteners, and the ergonomic handle prevents hand fatigue during long term use..
- [Reliable and Efficient]- Do not waste your time by using a screwdriver that damages your vehicle, Push Pin Removal Pliers Set is designed to work in tight spaces to enable you to remove those center locking pin style fasteners with ease..
- [Widely Applications]- Our push pin pliers work on anchors that are found in many makes and models including , , , , , and many other late model vehicles..
- Push Pin Removal Pliers Set is the perfect tool For removing center locking pin style fasteners..
Check StockLisle 81000 Torx Plus Bolt Set - 9 Piece
- Nine of the Most Popular Torx Plus Sizes for Automotive Applications..
- Some common Torx Plus applications include GM transmission bell housing bolts, Ford seat belt anchors and Ford pick-up bed bolts..
- Torx Plus drivers will not fit standard Torx fasteners..
- Standard Torx drivers will fit Torx Plus fasteners, but not to full torque because of the loose fit, and are not recommended..
- Set includes: TP-10, TP-15, TP-20, TP-25, TP-27, TP-30, TP-40, TP-45 and TP-50..
- Six smaller bits are 1/4" drive and three larger bits are 3/8" drive..
- All bits plus TP-55 and TP-60 are available individually..
Check StockLloyd Mats - Velourtex Ebony Front Floor Mats for Ford Mustang 1969-70 with Silver and Black Boss 302 Logo
- CARVAM Presents to you Lloyd Mats Velourtex Floor Mats: High Quality Mats that absolutely stays put for optimum safety and durability..
- Durable continuous filament nylon, 20 ounce per yard construction – superior to factory carpets. Smooth texture that matches OEM quality mats.
- Computer driven cutting process insures precise fit. Multi-layer backing maintains mat shape and protects OEM carpet with Non-skid rubber TractionBac also provides moisture protection.
- Factory-compatible mat fasteners (post, hook, snap) where applicable, Easy-to-install Lloyd anchors for vehicles not equipped with anchors.
- 3-year warranty against defects in design, workmanship and materials.
Check StockPowerwinch Sport Fishing 450 Freefall Anchor Windlass
- Free-fall anchor system designed for sport fishing boats.
- Stainless-steel rope and fasteners and watertight seals.
- Drops up to 4 times faster (150 fpm) than power-down anchors.
- Makes it easy to anchor boat in precise location (no drifting).
Check StockClip Pliers, High Durability Ergonomic Handle: Easy Removal Spring Loaded Common Application High Efficiency 30 Degrees Push Pin Plier for Vehicles for Home
- Premium Material: This 30 degrees push pin pliers are made from premium iron material, which ensures high durability..
- Easy Removal: This push pin plier is designed to work in small spaces, you can easily remove those center locking pin fasteners..
- Spring Loaded: This push pin plier adopts spring load for more convenience, quickly removes plastic anchors that have center pins without damage to pins or anchor..
- Ergonomic Handle: This push pin plier adopts ergonomic handle to prevent hand fatigue for long term use..
- Common Application: This push pin plier is suitable for many model vehicles without damaging the decoration and fasteners..
Check StockDecorative Contemporary Shelf Brackets - 8 3/4\ x 8 3/4\ - Satin Nickel - Pair
- HEAVY DUTY - There is nothing "lightweight" about these brackets, All components SOLID through and through, never hollow.
- BEAUTIFUL FINISH - Flawless satin nickel will look like new for years to come.
- IDEALLY SIZED - Each leg is 8 3/4". Easily accomodates shelving from 9" - 12" deep.
- FASTENERS INCLUDED - Two 3/4" screws to secure shelf, and two 1 1/2" screws for wall. Hollow wall anchors are also included..
- UNCONDITIONALLY GUARANTEED - Retrun for ANY reason within 30 days for a full refund..
Check StockBLACK+DECKER LightDriver 4V MAX* Cordless Screwdriver with Storage PAK (BDCSFS30C)
- 2IN1 DESIGN – Use as a cordless screwdriver and a rechargeable flashlight..
- COMPACT AND LIGHTWEIGHT – Allows you to maneuver in tight spaces..
- INDEPENDENT FLASHLIGHT – LED flashlight brightens up dark areas whenever you need it..
- ON-BOARD STORAGE PAK – Holds extra bits, drive guide, and fasteners..
- 4V MAX* LITHIUM ION BATTERY – Offers the convenience of cordless power..
- INCLUDES – (1) BDCSFS30C 4V MAX* cordless rechargeable screwdriver, (6) bits, (1) screw drive guide, (12) screws, (12) anchors, (1) charger..
Check Stock