Reviews Fast bonding Epoxy

WEST SYSTEM 865-4 G/5 Five Minute Epoxy Adhesive, 8 fl oz

  • EASY TO USE, epoxy resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. One-to-one mix, no pumps required..
  • FAST CURING 2-PART EPOXY allows 3-5 minutes of working time. It adheres to a number of surfaces including wood, ceramic, metal, leather, plaster, stone, fiberglass, glass, cork, some plastics, and paper. G/5 is an excellent choice for quick repairs around the house, high-end crafts and much more..
  • IDEAL VISCOSITY allows it to penetrate porous surfaces yet it's viscous enough to bridge gaps when gluing broken objects..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand. Adding G/5 to other WEST SYSTEM epoxies can speed their cure time. Since this very quick-cure epoxy is not as strong or waterproof as our 105 Resin-based epoxies or G/flex epoxies, G/5 will reduce the cured physical properties of other epoxies when blended with them..
  • BEST FOR PROJECTS that will remain dry and are not subject to high loads. Not recommended for long-term bonds subject to high loads or moisture. Comes with one 4 fl oz of Resin, and one 4 fl oz of Hardener..
Check Stock

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

  • For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
  • Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

Permatex 09102-6PK Rearview Mirror Adhesive Kit Pack of 6

  • Fast-setting, clear epoxy in an easy-to-use 2-part dispensing syringe.
  • This water and solvent resistant epoxy sets in 5 minutes with no clamping needed.
  • Better choice than super glues for bonding parts with larger gaps.
  • Temperature Range: -60°F to 180°F (-51°C to 82°C).
  • Suggested Applications: Complex, multi-piece assemblies. Bonds rigid materials including ceramic, chrome, fabric, fiberglass, glass, hard plastic,....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 206A Slow Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used ....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is....
Check Stock

TotalBoat FlexEpox Flexible Epoxy Adhesive 8 Ounce

  • 8 ounce kit. Two-part flexible epoxy adhesive produces permanent, structural bonds with high flex tolerances.
  • Easy 1:1 mix ratio, long working time, and fast cure time for reliable results—every time..
  • Waterproof bonding of wood, metal, fiberglass, glass, most plastics, stone, and masonry..
  • Can be used in cooler temperatures, on damp surfaces, and can even cure underwater..
  • Ideal viscosity for bonding joints or wetting out fiberglass fabric and tape to create flexible laminates. SIZE: 8 OUNCES.
Check Stock

Fasco Epoxies 110 Epoxy Glue Pint Kit (Wood, Aluminum, Fiberglass)

  • Adhesion - Unusually high adhesion to concrete, stone, wood, metal, glass, ceramic, rubber and a wide variety of plastic materials..
  • Cohesion - When the resin is properly cured, the cohesion strength within the bond line is so strong and the adhesion of the epoxy to the materials so great that stress failure will often occur in one of the materials being bonded rather than in the epoxy..
  • Shrinkage - Epoxy Glue cures with only a small shrinkage compared to other adhesives. As a consequence, less strain occurs at the bond line and it is stronger. Shrinkage is held to a fraction of 1%. . Stability - Epoxy glue maintains its dimensions and shape under prolonged stress. The stability combined with outstanding tensile, shear and impact strength makes epoxy glue unique among adhesives..
  • Resistance - Unlike most adhesive materials, epoxy glue is highly resistant to moisture. Its resistance to solvents is outstanding..
  • Insulation - Epoxy glue is an excellent insulator to both heat and electric current..
Check Stock

Mohawk Finishing Products Epoxy Putty Stick (White)

  • EASY TO USE- This fast curing Epoxy Putty Stick doesn’t require the use of any special tools like heating irons, alcohol torches, or knife ovens!.
  • PERMANENT REPAIRS- The Mohawk Epoxy Stick is a compound that will make a permanent repair and create the reshaping/replacing of wooden parts for general restoration..
  • VERY VERSATILE- The Epoxy Putty Stick bonds to plastic, fiberglass, brass, nylon, aluminum, glass and wood. It also adheres wood to metal, glass, and ceramic. It molds to any shape and won’t shrink!.
  • TRUSTED BRAND- Trusted since 1948, Mohawk Finishing Products took the products our professionals love and came up with a collection that can be used anywhere in your home..
Check Stock

Black Marble 1 Gallon Epoxy Resin Kit (Stone Coat Countertops) - DIY Countertop Epoxy Kit for Kitchens, Bathrooms, and Woodworking! Heat Resistant and Clear Epoxy Resin!

  • MIMIC BLACK MARBLE – Includes all the epoxy and color additives you need to make your countertops look like real black marble! Stone Coat Epoxy is DIY friendly and perfect for home improvement projects! Conforms to the health requirements of ASTM D4236.
  • STONE COAT EPOXY KIT – Stone Coat Epoxy is scratch-resistant and UV-resistant with a 45-minute working time! Heat-resistant up to 470 degrees Fahrenheit for incidental contact! With the right prep and foundation, you’ll enjoy your new epoxy countertops for years to come!.
  • METALLIC POWDERS – PolyColor Metallic Powder comes in a resealable 15 gram bag and will tint up to 2 Gallons of Stone Coat Epoxy. Metallic Powders are UV stable and made of fine, articulate pigment powder, which mixes fast and easy with resin countertop epoxy kits!.
  • EPOXY UNDERCOAT – Black Undercoat is an epoxy-based paint and primer mix which seals and bonds a firm foundation for your epoxy pour! Great for painting counters, MDF, plywood, and other surfaces!.
  • ZERO VOCs – No VOCs (Volatile Organic Compounds) means our epoxy countertop kits can be used safely, without any harmful side effects! Our countertop epoxy resin kits are USDA approved without any harsh industrial chemicals!.
Check Stock

Carrara Marble 1 Gallon Epoxy Resin Kit (Stone Coat Countertops) - DIY Countertop Epoxy Kit for Kitchens, Bathrooms, and Woodworking! Heat Resistant and Clear Epoxy Resin!

  • MIMIC CARRARA MARBLE – Includes all the epoxy and color additives you need to make your countertops look like real carrara marble! Stone Coat Epoxy is DIY friendly and perfect for home improvement projects! Conforms to the health requirements of ASTM D-4236.
  • STONE COAT EPOXY KIT – Stone Coat Epoxy is scratch-resistant and UV-resistant with a 45-minute working time! Heat-resistant up to 470 degrees Fahrenheit for incidental contact! With the right prep and foundation, you’ll enjoy your new epoxy countertops for years to come!.
  • METALLIC POWDERS - PolyColor Metallic Powder comes in a resealable 15 gram bag and will tint up to 2 Gallons of Stone Coat Epoxy. Metallic Powders are UV stable and made of fine, articulate pigment powder, which mixes fast and easy with resin countertop epoxy kits!.
  • EPOXY UNDERCOAT - White Undercoat is an epoxy-based paint and primer mix which seals and bonds a firm foundation for your epoxy pour! Great for painting counters, MDF, plywood, and other surfaces!.
  • ZERO VOCs – No VOCs (Volatile Organic Compounds) means our epoxy countertop kits can be used safely, without any harmful side effects! Our countertop epoxy resin kits are USDA approved without any harsh industrial chemicals!.
Check Stock