Reviews Fan Clutch Kit

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set with Adapter Case Hose for Car SUV Truck

  • PROFESSIONAL TOOLS - On the BMW, this fan clutch wrench will help remove the clutch fan to allow you to access the belts, pulleys, water pump, thermostat and much more. Essential tool kit if you want to DIY some of the basic repairs..
  • BUILT TO LAST - Made of premium CV-Steel, the fan clutch wrench removal tool is heavy and solid enough, well machined and finished, with silver tone. They are able to lock the pulley in place and loosen the fan clutch with no issues at all..
  • WHAT YOU WILL GET - You can get 4 pieces fan clutch wrench including 2pcs 32mm fan clutch wrench and 2pcs water pump pulley holder. They are both 15 inches in length, and 0.24 inch, 0.2 inch in thickness, respectively..
  • WIDE COMPATIBILITY - This tool kit is mainly custom for BMW but not limited to the following models of other brands: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, and S14, S38, S54, S50B30, S50B32..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our water pump holder tool within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shopping satisfaction..
Check Stock

Prokomon 8PCS Pneumatic Fan Clutch Wrench, 43300 Fan Clutch Removal Tool Kit for Ford, GM, Chrysler and Jeep

  • ◇ Durable --- The wrench tool kit is made of sturdy steel, durable and strong, with strong resistance to corrosion and rust..
  • ◇ Specifications --- Fan clutch wrench 7/8", 32 mm, 36 mm, 40 mm, 47 mm, 1-7/8" and 2". Wrench tool for Ford 6.0L and 6.4L power-stroke diesel pickups.
  • ◇ Easy to Use --- Simply slide the tool into the air hammer to select the correct wrench size for the fan nut, give it a few taps with the air hammer, and the fan clutch will loosen. No need for any other special nailing tools. (Note: Air hammer not included).
  • ◇ Function --- Specially designed to help you easily disassemble and install the fan clutch when repairing the water pump or fan clutch. (Please confirm the size you need before purchase).
  • ◇ Applications --- Compatible for Ford, Chrysler, GM and Jeep.
  • Compatible for 4.3L, 5.0L, 5.7L GM pick up (van, mini-van, or SUV)..
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance

  • CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
  • HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
  • GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
  • each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
  • EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
  • SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.
Check Stock

Yemtuls Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Work with Air Compressor Pump

  • Fan clutch wrench is designed to easily remove lock nuts on the temperature dependent thermo-viscous fans.
  • This fan clutch removal tool kit allows user to hold the water pump pulley in place while loosening the radiator fan.
  • Size: 32mm (1.26"),Wrench is 15" long, Holder is 15.75" long. Specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts, letting you service your timing or water pump quickly and easily.
  • Compatible for M4,M10,M20 ,M30, M40,M44,M50,M52,M52TU,M54,M56,M60, M70, M73, S14, S38, S54, S50B30, S50B32.
  • Constructed from high strength steel for durability and a long life.
Check Stock

Lisle 14440 Water Pump Wrench

  • More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with a wider range of models than similar products, compatible with most models of BMW, Ford and Mercedes-Benz. And its price is more affordable and better quality. This is a two-piece multifunctional tool that you will like..
  • Application: 32mm&36mm wrench tool is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford..
  • Brand new upgrade tool: 32mm & 36mm Fan Clutch Nut Wrench tool is more practical than similar tools on the market. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money.
  • Quality: This 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use..
  • Service: ZKTOOL has the most perfect warranty service. We provide all the necessary information for each product. If you have any questions, please contact us. We will wait 24 hours..
Check Stock

Four Seasons 36895 Reversible Fan Kit

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
  • BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
  • Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock

Flex-a-lite 14544 Mill Finish 1/2\ Fan Spacer Kit

  • 1/2" thick for proper spacing when attaching fan.
  • Kit comes with 5/16" bolts and washers to eliminate fan clutch from fan assembly.
Check Stock