Reviews Failure Analysis For Semiconductor

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

New Stigan Turbo Turbocharger w/Actuator For Dodge Ram Cummins 5.9L Diesel - Late 2004 2004.5 2005 2006 2007 2008 2009 - Stigan 847-1432 New

  • The Garrett 743250-5025S GT3782VA Stock Replacement Turbocharger offers a superior replacement option for your 2005.5-2007 Ford 6.0L Powerstroke. This turbocharger is 100% new and is not rebuilt or remanfactured like the Ford sourced units from your local dealer. A new Garrett turbocharger is a superior product versus independently remanufactured units..
  • Garretts compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may exceed life expectancy but is at risk for premature failure if reused. Analysis of failed rebuilt units show micro cracks in compressor wheel bores..
  • The Solenoid Control Valve utilizes stricter control parameters to regulate oil flow through the unit. These controls minimize the amount of oil direct to the turbine end seal to reduce turbine seal leakage..
  • The multiple cycles of the 6.0L application can cause high cycle fatigue of the turbine blades. When a 6.0L turbocharger is reworked it is unknown how many cycles are on the turbocharger which can lead to premature failure. Extended cycles can cause tip failures which can be mistaken for foreign object damage..
Check Stock

Hardness Testing File Set

  • 【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
  • 【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
  • 【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
  • 【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
  • 【Application】-----1)Bearings and other parts.
  • 2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
  • 4)Mechanical or permanent assembly installed.
  • 6)The original record of formal requirements on test results.
Check Stock

Cooling Fan Kit，Ultimate 3510 Cooling Fan Kit with Heatsink for The Latest Raspberry Pi 3B

  • FOR LEARN AND RESEARCH: Suitable for semiconductor refrigeration study, research solutions, development of refrigeration equipment planning.
  • WIDE APPLICATIONS: Semiconductor refrigeration system can be used for slab cooling, pet bed cooling, small space cooling.
  • 72W HIGH POWER: Semiconductor cooler possess high cooling power up to 72W, which is a perfect cooling device for fish , useful and practical.
  • NO REFRIGERANT REQUIRED: Semiconductor refrigeration water chiller support stable operation, low noise, no need for refrigerant.
  • CORROSION RESISTANT ALUMINUM ALLOY: Adopt good quality aluminum alloy material, light weight, has good strength and good corrosion resistance.
Check Stock

Dorman 751-739 Front Driver Side Power Window Regulator And Motor Assembly Compatible with Select Chevrolet Models (OE FIX)

  • Improved replacement - this motor and regulator assembly features enhancements over the original design for greater reliability.
  • Failure-resistant design - incorporates redesigned window slide block for significantly greater durability than the original equipment design.
  • Simple replacement - no special tools are required to install this regulator assembly.
  • Quality engineering - this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Peltier Cooler Semiconductor Refrigeration Cooling System DIY Kit 12V 6A Thermoelectric Peltier for Mini Air Conditioner

  • ADVANCED TECHNOLOGY-- Semiconductor coolers are a form of solid state cooling. The thermoelectric peltier adopts semiconductor technologies and electronic assembly techniques..
  • FEATURE-- Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc..
  • WIDE APPLICATION-- This thermoelectric cooler can be widely used for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory and more..
  • EASY INSTALLATION-- The semiconductor refrigeration has compact size and simple construction for easy installation, convenient to use..
  • GOOD COOLING EFFECT-- It has low noise, and can cool down quickly, ideal for small area cooling..
Check Stock

ESUMIC DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit Semiconductor Cooler Conduction Module + Radiator + Fan + TEC1-12706

  • 1. Material: Adopt TEC1-12706 semiconductor chilling plate, good quality for use..
  • 2. Structure: Complete sealed structure, isolating the moisture in the air..
  • 3. Application: Include TEC1-12706 semiconductor cooler and other accessories, easy to install. Compact size can be installed anywhere, easy installation. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning..
  • 4. Performance: High cooling efficiency, easily cooling down within a few minutes. Mini air conditioner for pet or little fridge..
  • 5. Effect: Great DIY kit for electronic enthusiasts in semiconductor cooling applications..
Check Stock

99.99% Silicon Metal Si Metal Element High Purity 14 Semiconductor Monocrystalline Si Block 10 g / 50 g(50 g)

  • GOOD SEMICONDUCTOR MATERIAL---The electric conductivity of the silicon metal strengthens as temperature rises, so it is a good semiconductor material.
  • PERFECT Original MATERIAL---The silicon metal is perfect Original material for monocrystalline wafer production.
  • 99.99% HIGH PURITY---The silicon metal is of 99.99% high purity monocrystalline silicon block.
  • INDUSTRIAL APPLICATION---The silicon metal can be used to produce converter, transistor, diode, etc.
Check Stock

FLIR ETS320 - Thermal Imaging Camera Solution - Targeted for PCB's and electronic devices in the lab

  • 320 x 240 IR sensor offers more than 76K non-contact points of temperature measurement, eliminates guesswork by pinpointing hot spots and potential points of failure..
  • Sensitive enough to detect temperature differences smaller than 0.06°C, for fast identification of faults and thermal gradients..
  • Measurement accuracy of 2°c aids in attaining quality assurance and factory acceptance of printed circuit boards..
  • Ergonomically designed for lab electronics measurement, the ETS320 is battery powered, Wireless, and hands free..
  • With complete measurement and analysis on the camera, the ETS320 measures small components down to 150 µm per pixel spot size, from a minimum focus distance of 70mm..
Check Stock

Portable Cooling Module 12V 10A 120W,Semiconductor Refrigeration Pieces Kit Thermoelectric Peltier Air Cooling Device with 12706 Chip for Pet Bed Cooling Small Space Cooler

  • Voltage Specifications: This semiconductor cooler 12V.
  • Premium Making Material of This Semiconductor Refrigeration: Aluminum + plastic fan..
  • Dual-core Semiconductor: 200 x 120 x 100mm / 7.87 x 4.72 x 3.93 inch..
  • Multiple Using Features: No noise, no vibration, no refrigerant required. The Air Cooling Device is suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling..
  • Widely Applicated Fields: The Cooling Module can used for plate cooling, pet bed cooling, test bench, small space cooling..
Check Stock