Reviews Face Frame Clamp

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • ...cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door frames of the cabinet. With movable drill guide holes, it is easy to drill holes and screw screws at specific positions. Even if you are not a professional installer, you can complete the installation in minutes..
Check Stock

ROCKLER 865042 Drawer Slide Jig, Blue

  • ...: Whether you're updating cabinets or you're building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won't operate well. The Drawer Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
  • Smooth Positioning: The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you'll know that your slides are positioned correctly, so your drawers will operate smoothly.
  • Incudes Two Brackets: The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet - one on each cabinet side - and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too.
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • LOCK & HOLD YOUR PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
Check Stock

Feedback Sports Ultralight Bike Repair Stand Red

  • Clamp features Slide-Lock ratchet for quick closure and Amplifying Clutch for precision clamping pressure.
  • 360° rotating clamp design provides easy access to any part of your bicycle.
  • Frame clamp adjusts from 35.5″-57.5″ (90-145cm) in height.
  • oriented vertical, horizontal, and everything in-between.
  • Rubber-coated clamp secures and protects expensive components and beautifully painted frames.
  • Clamp opening up to 1.9″ (4.8cm) accommodates large diameter frame tubes.
Check Stock

MODFANS Womens Reading Glasses Women 5 Pack Fashion Ladies Readers Comfort Spring Hinge Lightweight cateye Frame with Pouch 2.0

  • [Dimension/Function]Lens width:1.9in,Bridge width:0.79in,Arm width:5.27in. 1 PCS readers is 21g/0.046lb.Lightweight women reading glasses fit Middle/Narrow face. Resin aspherical lens, no distortion..
  • [Comfort to wear]Flexible spring hinge with Metal screw not easy to broken,stylish readers will not clamp face. 5 pack Fashion color women readers match ladies different clother..
  • [Super valued set]5 readers for women.You can put the reading eyeglasses in the company, room,courtyard,car.you can always get it..
  • [Package/Design]Inculding 5 pair plastic frame women glasses for reading ,5 pouch and 1 cloth. Colorful frame with Pattern temple..
  • [Customer service]100% Satisfaction Guaranteed.We are confident that our product will meet or exceed your expectations. If you are not satisfied with the product, however, we readily offer a 90-Day Hassle-Free Money Back Guarantee. Customer satisfaction is our priority.Better Vision Better World..
Check Stock

TRIWONDER Bicycle Seat Post Clamp Bike Quick Release Clamp Aluminum Alloy Seat Tube Clip (Black - 34.9mm)

  • ✅【MATERIAL】The bicycle seatpost clamp is made of high-quality aluminum alloy, with a smooth and exquisite appearance, anti-wear and practical.
  • ✅【28.6 CLAMP】28.6mm Bicycle Quick Release seat clamp is suitable for 27.2mm bicycle seatposts.
  • ✅【34.9 CLAMP】34.9mm Bicycle seatpost clamp is suitable for 30.8 / 31.6mm bicycle seatposts.
  • ✅【INSTALLATION】Simply secure with a 4mm Allen (hex) head key, the seat post clamp fits for most aluminum frame bikes, like mountain bike, road bike, etc.
  • ✅【NOTE】This bicycle seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself.
Check Stock

Kreg Pocket-Hole Jig 720PRO with the KHC3 Face Frame Clamp KHCRA Right Angle Clamp and the SK04 Starter Pocket Hole Screw Kit

  • ...t-Hole Screw Starter Kit includes the most-commonly used Kreg Screws, from 1" Pan-Head screws for building with 1/2"-thick material, through 2 1/2" Blue-Kote screws for building bigger projects outdoors--all housed in a durable, divided case..
  • This bundle includes the Kreg 720PRO Pocket Hole Jig the KHC3 3 inch Face Frame Clamp the KHCRA Right Angle Clamp and the popular SK04 Pocket Hole screw starter kit..
Check Stock

Kreg Pocket-Hole Jig 720PRO with the KHC3 Face Frame Clamp KPHA730 Micro Pocket Hole Jig Kit and SPC-C1-100 1 Inch Pan Head Pocket Hole Screws 100 Count

  • The Pocket-Hole Jig 720PRO is the most advanced jig yet from Kreg with features make project building incredibly efficient. One-motion clamping with....
  • Included with the 720PRO: Kreg Docking Station material support wings with a repeatable stop, as well as a Pocket-Hole Jig Clamp. Use the Pocket-Hole....
  • With the Pocket-Hole Jig 720PRO, you get the Kreg Docking Station material support wings with a repeatable stop, a Pocket-Hole Jig Clamp, 160 Kreg....
  • This Micro-Pocket Drill Guide Kit is perfect for small projects, ½" material, and narrow stock. Insert the Micro-Pocket drill guide block into your....
  • This bundle includes the Kreg 720PRO Pocket Hole Jig the KHC3 3 inch Face Frame Clamp the KPHA730 Micro Pocket Hole Kit and the SPC-C1-100 1 inch Pan....
Check Stock

Waynoda 31.8mm Black Bike Seat Clamp Aluminium Alloy Quick Release seatclamp MTB Bike Road Bike Casual Bike Seatpost Clamp ( 2 Pieces )

  • Standard Size: 31.8mm clamp suits for Frame Seat Tube 27.2 mm- 28.6 mm.
  • Material: Aluminum alloy, lightweight,Only about 35g per piece, durable and sturdiness, anodized in Black, colorfast surface, great anti-corrosion.
  • Easy to Install: Ergonomic design,without external key tool, more efficient. Quick release bike seat clamp,make adjusting seatpost height a breeze, super easy to lock and release, and has cutouts for weight savings.
  • Great replacement for bolt and nut clamp style, the seat is secure while also not needing a lot of force to fasten/unfasten the seat clamp.
  • Please Measure Your Seatpost Ture Size: The "31.8" refer to the diameter of the SEAT POST TUBE! Your choice of seat clamp size depends on the frame tube size where the seatpost enters the frame (seat tube).
Check Stock

TECHTONGDA 2 pcs Butterfly Frame Hinge Clamp DIY Hobby Tool Heavy Duty Zinc Alloy Silk Screen Printing Printer with Screw

  • ✅►:This screen hinge clamp is used to fix the screen frame during screen printing, and it is used to fix the screen frame on the table or work surface..
  • ✅► :Screen printing Hinge Clamps, also called butterfly clamps, are fabricated from a heavy-duty zinc alloy. They are used for fixing screens when printing. They feature a wide-wing thumbscrew for firmly fastening the clamp to the frame..
  • ✅►:Application Thickness of Screen: below 2" (51mm). Height: 3.5" (90mm) Length of Clamp: 2.4" (60mm) Net Weight: 0.44Lb (0.2kg).
  • ✅► :For Starters, new beginners learn how to screen printing.2 pcs Butterfly Frame Hinge Clamp are perfect DIY tool for those who regard screen printing as a hobby..
  • ✅► :Easy to install and positive locking for perfect registration A loose pin permits quick screen removal. Durable and rust-resistant..
Check Stock