Reviews Ezsmart Track Saw System

DEWALT Circular Saw, 6-1/2-Inch, TrackSaw Kit (DWS520K)

Zero clearance track saw cutting system delivers precise, straight, splinter-free cuts.Power Tool Type Corded.
For use with track saw dual-edged tracks for perfectly straight cuts in both directions.
On-track cut depth: 2-1/8 (54mm) at 90 degree , 1-5/8-inch (41mm) at 45 degree.
depth scale accurately indicates exact depth of cut accounting for track thickness.
12A, 1300W motor effortlessly powers through hard woods up to 2-1/8-inch thick.
Continuous Anti-Kickback mechanism and riving knife prevent kickback when engaged.
Low profile blade guard allows saw to be used in confined spaces.

Requires either the TTSTP track and/or the TTST1500 track for Saw operation. Tracks sold separately..
Easily accessible shaft lock for fast blade-change.
Soft-grip handles for comfort & control and a Plunge lock for safety.
Universal vacuum system adaptor with 360 Degree rotational outlet.
Saw comes with a 48TCG Saw Blade, a Dust Outlet Adaptor and a pair of Carbon Bushes. All of the required and optional accessories sold separately.

Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..

Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..

For perfectly straight cuts in both directions.
track saw dual-edged tracks for perfectly straight cuts in both directions.
Zero clearance track saw cutting system delivers precise, straight, splinter-free cuts.

Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood.
Plunge mechanism – allows for precise plunge cuts with accurate depth of cut.
Single bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cuts.
Constant electronics – helps maintain speed under the load of more-demanding applications.
Overload protection – protect the motor from overheating.
Efficient dust extraction – when connected to suitable vacuum cleaner, supports easier working conditions.
Swiveling hose port – keeps optional vacuum cleaner hose out of the way.
Easy blade-change system – quick three-step blade swap with spindle lock and on-board hex key.
Tracking adjustment – features front and rear knobs for adjusting the precision of the fit of the saw to the track to deliver the best cutting experience.
Specialized 48-tooth 6-1/2 In. track saw blade – designed for clean, precise results.

CUTS: Make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip....
GUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in....
EASY SAWING: Take your saw to the material instead of having to take your material to the saw.
VERSATILE: Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make....
BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System.

Precision guides for making accurate, repeatable cuts up to 13" wide when using the Adaptive Cutting System Plunge Saw and 62" Guide Track.
Versatile for making clean, straight rip cuts up to 13" wide.
Precise measuring with built-in adjustable guides and hairline measurement indicators.
Attach quickly when needed, and easily removable without losing calibration.
Safe cutting is provided by positioning the 62" Guide Track precisely while the saw moves over the material.

Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails.
StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail..
Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting..
The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps..
The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging..