Reviews Exhaust pipe

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

GY6 ATV 50cc 80cc 90cc 125cc 150cc 200cc Scooter Exhaust Pipe Bolt, nut Gasket + Exhaust Pipe Gasket + Gloves

  • Applicable to GY6 ATV 50cc 70cc 80cc 90cc 125cc 150cc 200cc scooters, go karts, four-wheel pit cars and mopeds..
  • Product size: exhaust pipe nut 32mm / 1.26in long, thread M6 is 5.8mm/0.22in. Nut / cover: 32 mm long / 1.26 inch, 5.1 mm / 0.2 inch thread M6..
  • Thickened gasket, bolt spacing 49mm, inner hole 27mm, double-sided, double-layer thickness! The exhaust pipe will no longer make noise!.
  • The kit includes: 4 exhaust pipe nuts, 4 exhaust pipe bolts, 2 exhaust pipe long bolts, 6 exhaust pipe washers, 2 thickened exhaust pipe washers, 4 flat washers, 4 spring washers and gloves..
  • Please compare your parts with the pictures before purchasing..
Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

Universal Stainless Steel Motorcycle Exhaust Muffler Noise Sound Eliminator 51mm Exhaust Pipe Baffle Removable Silencer

  • [Effective Noise Reduction]:The universal removable exhaust pipe muffler effectively reduce the deep sound while reducing motorcycle noise pollution..
  • [Removable] 51mm motorcycle exhaust pipe DB silencer, suitable for most motorcycles, installed at the rear of the exhaust pipe, is a detachable adjustable muffler for easy installation..
  • [Low-noise tailpipe]: The exhaust pipe can increase the exhaust pressure, reduce the tail-end noise, make the exhaust smoother, improve the power, and provide you with a good driving experience..
  • [Stainless Steel] The exhaust muffler is made of high quality stainless steel, whichis resistant to high temperature and rust and can be used for a long time..
  • [Safety And Environmental Protection] During the riding process, the muffler at the end of the exhaust pipe can clearly hear the whistle of the vehicles around the road, which is conducive to safe driving and reduce noise pollution..
Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

  • Parameter - 2.5”Exhaust pipe 90 degree elbow.
  • Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
  • Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
  • Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
  • Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
  • Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
  • Package List - You will get valued 4 pieces of 90 bend elbow pipes.
  • No pollution: healthy, environmentally friendly, non-toxic and non-polluting.
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock