Reviews Exhaust Manifolds And Header

LIBERRWAY Exhaust Wrap Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle 2 Rolls of 2 x50ft with 20 Stainless Ties and Gloves

Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and....
Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal....
Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap,....
Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching.....
What You Get: 2 rolls of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 20 pcs 0.3 in (width) x 11.8 ft (length) 304....

Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

New Mercruiser Water Shutter Kit for 4.3L V6.
This will only fit in y-pipe that was on the V-6 engines originally equipped with the one-piece exhaust manifolds. Will not fit later model y-pipes....

1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Temperature durable metal putty. Withstands continuous heat up to 235 °C and tip effects of 260 °C.
Suitable for exhaust manifolds, exhaust pipes, Silencer, engine, blocks and all your high temperature needs..

Withstands Up To 600 Degrees Fahrenheit To Protect Exhaust Components.
Perfect For Protecting Hangers, Tailpipes And Mufflers.
Easy-To-Apply Aerosol Formula Covers Exhaust Components From The Manifolds Or Headers Back.

Upper Exhaust Bellows for Mercruiser 3-4" 70981A3 3.0 3.7 5.0 5.7 18 2762 89070.
165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
After market Ref:Mercruiser:70981A3,Mallory Marine: 9-72808,Sierra: 18-2762,GLM: 89070.
Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow.
used: 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).

Temperature durable metal putty. Withstands continuous heat up to 235 °C and tip effects of 260 °C.
Suitable for exhaust manifolds, exhaust pipes, Silencer, engine, blocks and all your high temperature needs..