Reviews Exhaust Gaskets

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Caltric compatible with Exhaust Muffler W/Gasket Polaris Rzr 800 Efi 2008 2009 2010 2011

  • Fitment: Work with 1984-present Big Twin models new spherical exhaust port.
  • Harley 1984-2016 / 1986-2016 Sportster XL / Will not work with Harley V-ROD..
  • Made from Stainless Steel and solid. These new exhaust gaskets design to replace stock exhaust with aftermarket pipes when require..
  • Steel Mesh Style Crush Seal can provide a nice tight seal for an exhaust install. Replace Harley OEM Part Number: 65324-83B..
  • Easy to install and OEM perfect fit. These gaskets just slid in the exhaust port and sit there all fine when you try to assemble the exhausts..
  • Package Included: 1x Pair of Gasket Seal..
Check Stock

Vance & Hines Replacement Baffle for Straightshot Performance Exhaust Systems 21877

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Dynatech® 796-21637 BBC Exhaust Header Flange, 2-1/4 Port

  • 【Fitment】 Exhaust Collector Gaskets are especially designed for SBC BBC 302 350 454，fit for 2.5inch collector with Triangle (3 Bolt Pattern).
  • 【Easy Installation】 Come with two gaskets for easy to install and operate.
  • 【Long-Lasting & long-lasting】 Made with top quality solid copper material for maximum durability, not easy to crack.
  • 【Good Performance】 Reusable, no sealant required, good performance.
  • 【Notice】Please check the detail product description and OEM before placing an order. Any issues, please feel free to ask us..
Check Stock

MAHLE MS19832 Exhaust Manifold Gasket Set

  • All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.
  • MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets.
  • Exhaust manifold gasket set contains all gaskets required..
  • The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts,....
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Kohler 2 Pack Genuine 24-041-49-S Exhaust Gasket OEM

  • Brand New (2) Pack of Genuine Kohler Exhaust Gaskets... We are an Authorized Kohler Dealer... (2) Pack of Exhaust Gaskets Genuine Kohler Part #....
Check Stock