Reviews Exhaust Gas Temperature

2.5 inch 63mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Cut Out Exhaust Pipe Fits For 2.5"/63mm exhaust system.
  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Electric Exhaust Cutout.Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don't start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability..
  • 2.5 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it. Professional installation is highly recommended.
Check Stock

Hot Water Heater,110V 3000W Mini Electric Tankless Instant Hot Water Heater Bathroom Kitchen Washing US Plug Black

  • SELLER TIPS:Those who mind will buy with caution! The heating power of this product is constant, the temperature is adjusted by the water flow regulating valve or the tap switch, the high temperature of the water flow is low, and the low temperature of the water flow is high. According to our actual tests, the outdoor water temperature is low, and the water flow should not be too large, which is suitable for daily washing. Those who mind will buy with caution!.
  • INSTANT & SUFFICIENT HOT WATER:The heating of the product is adjusted by the water flow regulating valve or the faucet switch. Large water flow means low temperature, and small water flow means high temperature. Applied with 3000W heating system, the electric water heater supplies instant, consistent and endless hot water shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those "lukewarm" toys..
  • SMART SELF ADJUSTMENT:The hot water heater adjusts power input based on flowing rate and temp setting in real time. thus you still get ideal temperature instead of scalding hot water, which means comfortable experience, simple operation. It is recommended that the product be washed in winter for hand washing, dish washing, face washing and other s....
Check Stock

Tengchang 16L Natural Gas Hot Water Heater 4.2GPM Tankless Digital Constant TEMP Boiler with Exhaust Pipe

  • This electric water heater features instant heating, tankless and constant temperature control. With protection against dry heating and over-temperature protection. It is safe, energy-saving and long lifespan, providing you and your families more comfortable bathing experience..
  • Material: Plastic + Metal Exhaust temperature：Maximum 392°F Heating Material: nickel-chromium alloy liner.
  • Rated Voltage: AC 110V / 60Hz Rated Heat Input Power: 32kW Rated Hot Water Output: 16L/min Electrical Rating: 36W.
  • Gas Pressure: 2000Pa Rated water pressure: 0.02-0.8Mpa Gas pipe: G 1/2'' Water Inlet: G1/2'' Water Outlet: G1/2''.
  • Waterproof rating: IPX4 Support thermostat: Yes Style: Vertical.
Check Stock

Tankless Water Heater - 3000W Mini Electric Instant Water Heater Under Sink with LCD Display for Home Kitchen Washing US Plug 110V, 7.87 x 4.13inch Wall Mounted (Gold) 30-55℃

  • 【Eastbuy TANKLESS WATER HEATER 】 NOTICE Before PURCHASE: The water heater need a larger than 32 amps circuit breaker.
  • the outlet water temperature won't very hot because the water heater just 3KW, so it can't be used to bath or wash hair, it can be use to wash hand or use in kitchen（30-55℃）. If it doesn't meet your require, PLEASE DON'T BUY..
  • 【SMART SELF ADJUSTMENT】Temperature adjustment is through the water flowing valve or the tap. The water flow is large and low in water. The temperature is high in winter. The temperature in winter is between 20-40 degrees. Weaving hose). The blue ring of the water outlet is the water inlet, and the red circle is the outlet..
  • 【SAFE AND DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Safe heater, electricity saving, water saving, no pollution, no exhaust gas.The temperature is adjusted by the water flow regulating valve or the tap switch..
  • 【ECO & ELECTRIC & WATER SAVING】 Safe heater, save up to 55% on your electric cost, water saving, no pollution, no exhaust gas.The heating of the product is adjusted by the water flow regu....
Check Stock

Wireless Pressure Sensor, 1/4”NPT, 5kPSI (5,000PSI)

  • Perfect for EGT exhaust gas temperature measurement and display.
  • Upper and lower limit alarm output for control.
  • Temperature can be set to display in Celsius or Fahrenheit.
Check Stock

Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)

  • ... Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. This will reduce inlet ....
Check Stock

BUSIDN 3 inch 76mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don’t start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability.
  • 3.0 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock

VIVOHOME 2.64GPM 10L Outdoor Portable Propane Gas Tankless Water Heater Digital Display RV Camping Water Heater Overheating Protection Easy to Install White

  • PORTABLE AND EASY TO USE - Our outdoor gas water heater has a digital display where the water temperature is displayed in Fahrenheit (℉).
  • Standing at a proper size of 25×13.4×6.5 inches and a light weight of 17.38 LBS, it is easy to carry.
  • A pre-installed handle enabling it to be hung firmly on anything.
  • Equipped with a quick connector and two 1/2’’ to 3/4’’ adapters, it is easy to install or uninstall to meet the needs of RV.
  • INSTANT HOT WATER - No need to wait for preheating and no need to worry about limited hot water.
  • Our gas water heater allows you to immediately enjoy the water temperature you set at any time and any location.
  • Heating up quickly, it outputs 2.64 gallons of instant hot water per minute to meet your various demands.
  • The applicable water pressure is 3～145 PSI（≥0.8GPM) (if the water pressure is lower than 3 PSI, the water heater cannot ignite).
  • SAFE AND SOUND - This tankless water heater does not need to be plugged in and there is no risk of electric shock.
  • With CSA-certified gas pipe and more than 4 safety protection methods such as overheating protection, antifreeze protection, flameout protection, and anti-dry protection, the water heater provides comfortable and safe bathing conditions for customers.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • ...the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will serve you within 24 hours..
Check Stock

Erweater 2 Roll 2″ x 50ft Titanium Exhaust Wrap Header Wrap Roll Kit, for Motorcycle Car Manifold Header Pipe Heat Wrap Tape with 10pcs Stainless Ties

  • Made of high quality thickened fiberglass material with locked edges on both sides for easy breakage. Exhaust pipe wrap can reduce the heat under the hood by up to 50%, improving the performance of cars and motorcycles..
  • It can work for a long time at high temperature from 900 to 1000 degrees Celsius! Stronger and more durable for improved thermal performance and reliability Highly resistant to wear, oil leaks, temperature and vibration damage..
  • Extremely flexible for a tight and secure wrap. Improved horsepower performance for automotive exhaust header wraps, motorcycle exhausts, gas pipes and other custom applications..
  • Soak header heat wrap in water prior to installation so the fiberglass doesn’t fly around. Put on gloves (not included), wrap it around the exhaust pipe, secure it with an overlap (like the grip of a tennis racket), and simply secure the ends with stainless steel ties..
  • Package includes two 2″ x 50 ft rolls of heat wrap, 10 stainless steel zipper ties. If you have any questions or are not satisfied, please feel free to contact us..
Check Stock