Reviews Exceptional Viscosity Index Stability

Duragard Arctic Blue Hydraulic Fluid - 5 Gallon Pail

FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..

For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
Flash Point: 230 Degrees C Country of Origin (subject to change): United States.

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.

Viscosity Index Improvers: Enhanced VII maintain lubricant flow and improve shear stability of the oil, especially at extreme temperatures..
Water Demulsifiers: Improves fluid ability to separate from water, virtually eliminating hydraulic issues related to water..
Pour Point Depressants: Reduce the pour point and improve flow at low temperatures..
Detergents and Dispersants: Enhances the fluid's ability to clean and disperse contaminants..
Extreme Pressure/Anti-Wear additives: Polarized AW, Friction Modifier and EP components provide unequaled protection for pumps, pistons, and sleeves. Fluid strength in increased allowing for significant friction reduction and protection of vital hydraulic components. Polarized film protects pumps during start up conditions..

Protects under the most severe engine conditions found in modern low-emission engines and older hard working diesel engines.
Exceptional wear protection for longer engine life.
Superior engine cleanliness for a cleaner engine throughout oil drain interval.
Enhanced protection against oxidation for more efficient operation.
Increased shear stability for better viscosity control and optimal oil pressure.

Conventional 10W-30 diesel engine oil with Triple Protection technology protects against wear, deposits, and oil breakdown.
Protects your bottom line with a lower viscosity that allows for less engine resistance for improved fuel economy compared to an SAE 15W-40.
Formulated with advanced additive technology for enhanced deposit protection to help keep engines cleaner over the oil drain interval.
Enhanced protection against oil oxidation for more efficient operation.
Increased shear stability for better viscosity control and optimal engine oil pressure (compared to the previous formulation).
Meets or exceeds API CK-4 requirements and is designed to provide extra performance in both older and new engines.
Case of three 1-gallon bottles with ergonomic design for easy handling and pouring.
Exceptional wear protection for longer life in a wide range of heavy-duty engine applications from diesel pickup trucks to tractors to tractor trailers.

Full synthetic GL-4 75W80 with PAO and Esters, manual transmission fluid. Exceeds all OEM fluid performance for 75W80 gear, MT, differential, syhchromesh and transfer cases..
No reactive sulfurs, protects all yellow metal components. Extremely long drain intervals up to 5 x OEM intervals..
Contains a custom build, high-performance detergency adpack coupled with friction modifiers, defoamers, and a corrosion inhibitor to handle various kinds of contamination.
features 204 VI Index, extreme viscosity stability, and arctic grade, -60 F pour point..
Excellent shifting performance, rapid, smooth shifting, no slipping. Eliminates notchy shifting and "grinding" gear noise..
Compatible with Honda, Acura, Toyota, BMW, Audi, Mini, BMW X5 Tranfer Cases, Jeep, Chrysler, Ford, Mercedes Benz and many others..

Provides excellent performance in electronically controlled automatic transmissions. Dyed red for easy leak detection.
Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives. Helps prevent rust and corrosion.
Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder.
Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity. Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam.
Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended.