Reviews Evap Temp Sensor

ANCEL AD410 Enhanced OBD II Vehicle Code Reader with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • ...ONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair..
  • ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission..
  • Aims to analyze battery health status to calculate the actual cold cranking capability and the aging extent. Based on the majority of battery standards, such as CCA, BCI, CA, MCA, JIS, DIN, SAE etc., gets the accurate test result within 1 second..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life g....
Check Stock

ANCEL AD410 OBD II Vehicle Check Engine Light Automotive Code Reader with ANCEL Protective Case Storage Bag

  • ...000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network).
  • Works with English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
  • It does not require any Battery or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle..
  • EXCLUSIVE OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code reader initiates a leak test vehicle's EVAP system by monitoring the integrity of the fuel tank system.
  • And the O2 Sensor Test is for monitoring and adjusts air/fuel mixture, which can identify troubleshooting related to fuel efficiency and vehicle emissions..
  • QVGA DISPLAY & NEW UI - AD410 is a great upgrade from the more basic diagnostic scan tool. It has a 2.4" TFT true color (262K) LCD display, indicates test result more clearly. With the easy-to-read UI designed, you can easily access among Setup, OBDII Diagnostics, I/M readiness, DTC Lookup, and Review, don't even need to read the manual to know what to do, even a beginner can easily use this unit..
  • The only official durable protective hard case designed for ANCEL AD210, AD310, AD410, AD510, AD530, VD500, VD700, JP700, BD310 OBD2 Scanner and BST200, BA101 Battery Tester..
Check Stock

Vornado MD1-0002 Replacement Humidifier Wick Filters, 2-pk

  • Work with models Evap3, Evap2, Evap1, Model 30, Model 40 & Model 50.
  • These humidifier replacement filters, part number MD1-0001 (same as MD1-0002), work with models Evap3, Evap2, Evap1, Model 30, Model 40 & Model 50..
Check Stock

ANCEL AD410 Enhanced OBD II Vehicle Code Reader with ANCEL BA101 Professional 12V Automotive Load Battery Tester

  • ...l OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network).
  • Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese.
  • Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle..
  • The AD410 supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission..
  • The BA101 has small compact design, scan faster and indicates test results directly. Even a beginner can use this unit to analyze any 12V batteries healthy, tells you everything about the battery: voltage, charge, cranking power, and how much life is left in the battery (level of Ohm resistance). Does it quickly and precisely..
  • The BA101 battery tester is well built with a large LCD display that has white backlight and contrast adjustment, indicates test results directly. no internal batteries required and gets the power directly from the 12V battery..
Check Stock

RO6G Humidifier Filter for Vornado Evap1 Evap2 Evap3 2-Pack

  • Includes two (2) humidifier filters as pictured.
  • High Quality Humidifier Wick Filters for Vornado Evap1, Evap 1, Evap 2, Evap2, Evap 3 and Evap3.
  • Approximate Measurements: 8-15/16" L x 7" W x 1-11/16" T.
Check Stock

GE & HOTPOINT ELECTRIC RANGE BURNER ELEMENT SENSI-TEMP COIL - 6”

  • Genuine GE Appliances 6" range coil burner with Sensi-Temp Technology to reduce the potential for surface cooking fires.
  • UL 858 safety standard compliant with a silver medallion sensor to reduce temperature when exceeding 450 Degrees Fahrenheit.
  • Easy to install or replace your existing coils, no tools required.
  • Sensi-Temp Technology coil elements/burners are compatible with most 2011 and newer 30" freestanding GE or Hotpoint brands. Sensi-temp burners on ranges manufactured on or after the regulatory change cannot be replaced with burners without Sensi-Temp Technology.
  • Pots and pans need to be flat so the sensor can contact the bottom.
Check Stock

K20 K24 K-Series Engine Harness/K Swap Engine Harness Replacement for Hon-da Acu-ra K-Swap Cars/ 02-04 RSX Type S&Base/ 01-05 Civic EP3(Type S or K24 Swap)

  • Item Description The Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC)..
  • Will fit Following Models K-Swap Cars 02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap).
  • Note: *Will NOT fit RHD cars or RWD cars. This Engine Harness Does Not Contain VTEC Plugs..
  • Features: All plugs included except EVAP and AC Covering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F) SAE Certified Automotive Grade Wiring All plugs are labeled Tucked design.
  • Durability matters, that is why our injector harness is constructed from durable, high temperature wire to ensure excellent conductivity. Meanwhile the high-quality materials help to resist corrosion of the injector wire harness, ensuring a long service life.
Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

  • ...determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
  • 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
  • in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..
  • 【Wide Testing Range】Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats..
Check Stock

VDIAGTOOL VD30 Car Code Reader, Enhanced Mode 6 OBD2 Scanner for Turn Off Check Engine Light, CAN Diagnostic Tool, Universal Automotive Check Engine Code Reader with One-Click Smog Check, Red

  • ... engine fault code reader performs all 10 modes of OBD2 tests on your car to catch emissions problems before they become a major concern. It can quickly read/erase codes (DTCs) and display DTC definition, view enhanced 4 in 1 live data and retrieve freeze frame, show I/M readiness status by one-click, locate bad O2 sensors, on-board monitor test, component test, retrieve vehicle information and module present. Find out the root causes of CEL..
  • ➤【ENHANCED OBDII DIAGNOSTICS】 - This VD30 OBD2 code reader supports ✅ O2 Monitor Test - Which can used to locate the bad O2 sensors and identify problems related to fuel efficiency and vehicle emissions. ✅ Mode 06 On-board Monitor Test (Check cylinder misfire) - It keeps track on how emission control components and other systems and sensors are functioning. ✅ Mode 08 Component Test (EVAP leak test) - Initiate a leak test of a vehicle's EVAP system..
  • ➤【TURN OFF CHECK ENGINE LIGHT】- Diagnostic Trouble Codes (DTCs) are sent to the vehicle's instrument panel to trigger a warning light. This check engine code reader brings a fast access to scan the car emissions-related error codes, retrieves generic codes, manufacturer specific codes, pending codes, permanent codes and displays DTC definitions on ....
Check Stock

Trail Tech 732-ET1 TTO Engine Temperature Meter - 10mm Plug

  • Replace the broken wire with our pigtail harness kit..
  • This kit fits for Polaris the EFI temp sensor on just about every EFI ATV or UTV..
  • Includes 10" long pigtail, two zip ties and two butt connectors..
  • Simply cut out the old harness, splice in the new one and plug it into the sensor..
  • Replaces pigtail kit part # 2875543 and 2878496. Fits for Polaris the following models using temp sensor part number 4010644:.
Check Stock