Reviews European Crowfoot Coupling

ARES 33005 – 1/4-Inch Drive Spring Loaded Auto Adjusting Crowfoot Wrench – Adjustable Wrench with 5 to 11mm (3/16-Inch to 7/16-Inch) Coverage – Male and Female Square Drives for Increased Versatility

  • DESIGN: This auto adjusting crowfoot wrench is the perfect solution to your search for the right tool in the middle of the job. With spring loaded adjustable jaws that quickly adjust to fit the exact size needed and ratchet with each turn, this tool has enough coverage to replace wrenches ranging from 5 to 11mm (3/16-inch to 7/16-inch). Now you can tackle dozens of different jobs with this single tool..
  • QUALITY: Our crowfoot wrench’s adapter body and jaws are finished with manganese phosphate and chrome plated finishes, providing your tool with increased durability and protection against wear, tear, rust, and corrosion. Thanks to the wrench jaws’ serrated toothed design and heavy duty chrome vanadium steel construction, you can approach any job with confidence knowing your wrench will not slip or stick in use..
  • APPLICATIONS: Thanks to its male and female square drive ends, you can use this wrench flexibly with a wider variety of ratchets and extensions for added leverage and control. Whether you’re working on tie rod removal, plumbing jobs, or loosening and tightening hex nuts and bolts, this auto-adjusting crowfoot wrench has you covered on a wide variety of applications..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tool....
Check Stock

WORKPRO 3/8\ Drive Crowfoot Wrench Set, 10-piece Flare Nut Wrench Set, Metric 10-19mm, Steel Wrench With Storage Rail, Easily Access Hard-To-Reach Areas

  • High-Quality Crowfoot Wrench Set: Made of Chrome Alloy, these wrenches are more solid, durable, and corrosion-resistant..
  • 10 Pcs Common Metric Size: Metric sizes for 3/8" drive flare nut wrenches include 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm. Each wrench is engraved with dimensions for easy identification..
  • Convenient Storage: The secure storage rail contains 10 spring buckles, and each crowfoot wrench is buckled on the spring buckle. This design is very suitable for storage and taking..
  • Usage: WORKPRO crowfoot flare nut wrench set speeds up installation and removal. It fits perfectly on 3/8” drive ratchet, extension rod, or torque wrench. With easier access to fasteners in narrow spaces, 10 sizes meet more of your needs and make your job easier..
  • Wide Application: The set is very suitable for working on oil-circuit machinery. It is also suitable for lawn equipment, car automotive & truck work in tight engine/radiator areas & controls arms or for underneath sink/toilet work..
Check Stock

ARES 33009 – 3-Piece Spring Loaded Auto Adjusting Crowfoot Wrench Set – Adjustable Wrench Set with 5 to 32mm (3/16-Inch to 1 1/4-Inch) Coverage – Male & Female Square Drives for Increased Versatility

  • DESIGN: This auto adjusting crowfoot wrench set is the perfect solution to your search for the right tool in the middle of the job. With spring loaded adjustable jaws that adjust to fit the exact size needed and ratchet with each turn, these wrenches have enough coverage to replace a variety of wrenches. The 1/4-inch drive covers 5 to 11mm (3/16-inch to 7/16-inch), the 3/8-inch drive covers 8 to 17mm (5/16-inch to 11/16-inch), and the 1/2-inch drive covers 14 to 32mm (9/16-inch to 1 1/4-inch)..
  • QUALITY: Our crowfoot wrenches’ adapter bodies and jaws are finished with manganese phosphate and chrome plated finishes, providing your tools with increased durability and protection against wear, tear, rust, and corrosion. Thanks to the wrench jaws’ serrated toothed design and heavy duty chrome vanadium steel construction, you can approach any job with confidence knowing your wrench will not slip or stick in use..
  • APPLICATIONS: Thanks to their male and female square drive ends, you can use these wrenches flexibly with a wider variety of ratchets and extensions for added leverage and control. Whether you’re working on tie rod removal, plumbing jobs, or loosening and tightening hex nuts and bolts, this auto-adjusting crowfoot wrench set has you covered on ....
Check Stock

ScaAuto Golf Cart Accessories Plug 2 Prong Charger Plug DC Crowfoot Charger Handle Plug for 36 or 48 Volt EZGO Club Car Golf Carts

  • For 36 or 48 Volt EZGO Club Car Golf Carts.
  • All Connectors made with flame retardant materials.
  • Club Car 2-Blade Crowsfoot style Connector 'ONLY' Replacement Kit.
Check Stock

VCT 10 Pc 3/8' Drive Fully Polished Metric Flare Nut Crowfoot Wrench Set

  • 3/8 in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 22mm--the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage..
  • Includes 10 Crowfoot Flare Nut Wrenches from 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm.
  • Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum on fasteners.
  • 15-degree offset provides clearance for your fingers and other obstructions near the fastener.
  • Drop forged alloy steel material provides strength and comfort.
Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

xiixtoo 36 Volt 20 AMP Replacement Battery Charger for 36 Volt Club Car, EZGO & Yamaha Golf Carts with Crowfoot Plug

  • 36 VOLT 20 AMP GOLF CART BATTERY CHARGER WITH CROWFOOT PLUG- Charges 36 volt Club Car, EZGO & Yamaha golf carts with the “crowfoot” style plug..
  • Input Voltage: AC 90-130V, Output: DC 36V 20Amps..
  • LIGHTWEIGHT & PORTABLE - The charger weighs in at only 5.9 lbs and is more than 66% lighter than OEM golf cart battery chargers. Whether you are in the garage, parked in front of the clubhouse or at the cart shed, the light weight charger can easily be taken with you..
  • Featuring on the charging status are 2 LED lights. Operating on standard 110V household power..
  • Fully Automatic Battery Charger, forget 3-stage smart charging, completes the charge cycle and goes to "float charge.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock