Reviews Ethernet Rs485 Adapter

StarTech.com 1 Port RS-232 Serial to IP Ethernet Device Server - DIN Rail Mountable - Serial Device Server - Serial Over IP Device Server (NETRS232), Black

This product do not include user manual, if you need, we will send the pdf file to you.
HF2211 is a low-cost serial device server,which function is to realize bidirectional transparent transmission between RS232/RS485/RS422 and WiFi/Ethernet..
Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 460800 bps.
MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos.

Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication up to 4000ft (1200 meters).
Mini RS 232 to 485 serial adapter enables the connections of multiple bus nodes and 32 devices can be joined in RS-485 network.
RS-232 to RS-485 Converter controls the “Receive” and “Transmit” modes automatically.
Up to 115.2kbps baud rate (auto-detect) can be applied to point to point two wire half duplex and point to multi-point two wire half duplex....
A built-in Transient Voltage Suppressor (TVS) supports 600W anti-surge protection on each line of RS485 link which effectively guard devices from....

NDI|HX technology permits 1-cable setup to deliver video signal, and control and power the camera. Compare to Minrray UV510A..
Dual simultaneous streams directly from the camera to Facebook Live, YouTube Live, Vimeo Live, or any other RTMP server.
1/2.8″ CMOS, up to 1080p60 resolution (1920×1080 at 60fps), H.264 & H.265 compression.
HDMI, 3G-SDI, RJ-45 ethernet, 3.5mm audio in, RS232 in and out, and RS485 ports, supports AAC, MP3, and PMC audio compression.
Includes infrared remote. Can also control via any IP Visca, Pelco-D or Pelco-P software or hardware. Also includes ethernet crossover cable to simplify network setup, and DC12V power adapter.

-cp2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485..
-USB specification 2.0 not 3.0, compatible with arduino,Windows XP/7/8/10 32bits/ 64bits, Linux etc..
-You need to set the dip switches for different conversion purpose..
-Before make 6 in 1 usb to ttl module work, you need to install cp2102 driver..
-cp2102 usb to ttl adapter widely used with nextion display, beitian gps, esp-01s adapter, sim7000a board etc..

...ific Feature: Support multiple WAN access methods, including static IP, DHCP, PPPOE,3G/UMTS/4G/LTE, DHCP-4G. Supports UPnP, Dynamic DNS, Static Routing, VPN (PPTP, L2TP, IPSEC, GRE. Suppots WIFI, Compatible with 802.11b/g/n, AP and Client Mode.
Yeacomm Dual SIM 4G Modem supports RS232 (or RS485/RS422), Ethernet port and WIFI that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
4G Wireless Industrial Router working band, LTE FDD: B1/2/B3/B4/B5/B7/B8/B28.
HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz.
EDGE/GPRS/GSM 1900/1800/900/850MHz. Not compatible with Verizon and Sprint.
Yeacomm 4g lte sim router adopts high-powered industrial 32-bits CPU and embedded real time operating system. Widely used on machine to machine fields, such as self-service terminal industry, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, etc.
Yeacomm YF325 4G Modem Good to use in North America and South America, Australia, New Zealand, Philippines, etc.Gift: 4 in 1 Converter Kit SIM Card Adapter with Steel Tray Eject Pin.

Both ends , TX and RX, Send SD HD SDI up to 1080i/60 in both directions at the same time.
supports multimode and single mode fiber -ST/PC connector.
Easy to read SDI and Light detect LED's , Power supply included , Compliant with SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard, supports 1.485Gb/s and 270Mb/s One SD/HD-SDI input (BNC), one SD/ HD-SDI output(BNC) and one fast Ethernet interfaces Supports 1080P@30,25,24, 29.97 / 1080I@60,50,59.94 / 720P@60,50,30,25,24, 59.94, 29.97, 23.98 and 625i / 525i format,.

Compact, rugged, industrial-grade RS-485 device server.
Modbus RTU to Modbus TCP protocol converter, Modbus gateway for master and slaves.
Supports TCP and UDP for both Server and Client modes, support Httpd Client mode.
Designed for harsh industrial environments, 15kV ESD and 600W surge protection, Operating temperature: -40ºF to 185ºF / -40ºC to 85ºC.

USB RS485 UART Serial Converter Adapter Cable Compatible USB-RS485-WE.
6ft/1.8m in length , with new original FTDI chipset import from UK.
Signal Output: GND-Black, Data- -Yellow, Data+ Orange, 5V power-red, Termintor1-brown, Terminator 2-green.
FT232RL & SP485leen , TX, RX LED Shows design on PCBA.
System Support: All windows system, Win7/8/10/xp/mac/linux/android, environment PVC jacket & pure copper wires, Central Package.

FoMaKo KC-608B(Blue) IP PTZ Camera controller completely compatible with VISCA, PELCO- P & D protocol , Supports RS232, RS422, RS485 and Ethernet IP connections..
POE supported, very easy to use, just one cable to connect to your LAN.
Easy and professional to control PTZ Cameras, Pan, Tilt, Zoom, focus, Iris, backlight, presets, PTZ Speed, quick PTZ Camera select & more..
Support 4 cameras quick select, max control 255 PTZ Cameras..
Ethernet IP connection control the IP Streaming PTZ Cameras in your LAN only by one network cable..

Convert your DB9 male connector into an RJ45 female connector.
Used for modular RS232 RS422 and RS485 connections.
Can be used to make customized serial connections.
DB9 to RJ45 Modular Adapter Female to Female / DB9 to RJ45 Adapter / RJ45 to DB9 Adapter / RJ45 to DB9.
Guaranteed reliability with a lifetime warranty.