Reviews Epoxy Primer For Bare Metal

USC 2K Spray Max Epoxy Primer Paint Aerosol

  • RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
  • The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
  • It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust.
Check Stock

TRANSTAR 6131 Gray 2K Epoxy Primer/Sealer - 1 Gallon

  • RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
  • The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
  • It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust.
  • 1L covers approximately 60 sq feet at 3 MIL.
  • Salt spray resistance test completed at 003e1000 hours according to ASTM B117 at an independent laboratory.
Check Stock

TotalBoat 2-Part Marine Epoxy Primer Off White High Build Primer Quart

  • 2-Component epoxy primers provide maximum adhesion & improved durability for urethane topcoats on fiberglass, metal, and previously painted surfaces.....
  • The Surfacing Epoxy Primer formula is great for sealing faired substrates ready for topcoat application..
  • The High Build Epoxy Primer formula is ideal for covering pinholing and filling other minor surface defects..
  • Dries fast and is easy to sand. Overcoat with 1- and 2-part urethanes. For use above and below the waterline..
  • Choose primer type, size, and color: Surfacing Primer is available in Quart and Gallon size kits, in Gray and Off White.
Check Stock

Eastwood High Build Self Etching Primer Gray Aerosol for Bare Metal True Acid-Etching Formula

  • Fill-In Imperfections As They Prepare Bare Metal For Non-Epoxy Topcoats..
  • Strengthens Adhesion, Durability, And Color Hold-Out.
Check Stock

Self Etching Primer Gray 15.5 oz. (6/Pack)

  • 1 Gallon (3.8 Liters) Can of GRAY - Custom Shop Premium Self-Etching Acid Etch Primer. Gray primer color. It etches and primes bare, rust-free metal in just one step..
  • Premium Self-Etching Acid Etch Primer is a ready-to-spray, self-etching primer with tremendous adhesion and flexibility properties. It provides excellent adhesion to the following properly prepared substrates: steel, aluminum, fiberglass, previously painted surfaces, wood, and some plastics..
  • It's a super primer with anti-corrosive properties, which makes it ideal for use over bare metals such as aluminum and steel. It’s a perfect primer for fleet and OEM manufacturers..
  • This coating is fast drying and is sandable after 60 minutes. It also improves color holdout, gloss retention and has excellent inter-coat adhesion..
  • Ideal for use on properly prepared truck beds before the application of truck bed liner coatings. This primer works excellent under all major brands of truck bed liner coatings like Custom Coat, UPOL Raptor, and Gator Guard..
Check Stock

POR-15 High Build Primer - 1 gl. - Sandable Bonding Coat | Fills in Minor Imperfections | Single Component Formula

  • ✅ POR-15 HIGH BUILD PRIMER - Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products. Single component formula that fills in minor Imperfections and adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces..
  • ✅ INTERLOCKING PRIMER - Formulated with special adhesion characteristics that make POR-15 High Build Primer perfect for most painted surfaces especially POR-15 Rust Preventive Coating. Our High Build Primer Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products..
  • ✅ APPLICATION - For maximum adhesion sand surfaces to be painted with 320 grit sandpaper. Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Bare metal surfaces should be treated with POR-15 Metal Prep for maximum adhesion. Spray or brush on one or two covering coats of POR-15 High Build Primer and allow 10 to 15 minutes between coats. POR-15 High Build Primer can be topcoated after 24 hours of cure..
  • ✅ WHEN DO I NEED THIS? - POR-15 High Build Primer is highly resistant t....
Check Stock

VHT SP118 FlameProof Coating Flat White Primer Can - 11 oz. by VHT

  • XTC Silicone Zinc Primer prevents corrosion of metal surfaces exposed to high heat, high humidity, condensation and salt air.
  • XTC Silicone Zinc Primer functions much like galvanizing as it locks itself to bare metal surfaces leaving a perfect primed surface for top coating.
  • XTC Silicone Zinc Primer can be used alone as a finish paint.
  • XTC Primer withstands temps in excess of 1200 Degree F (648 Degree C).
  • XTC Silicone Zinc Primer is Gray in color.
Check Stock

Custom Shop - Gray DTM High Build 2K Primer Surfacer 2.1 VOC (1-1/4 Gallon Kit) High-Performance Direct to Metal Primer for Automotive and Industry use Kit= 1 Gal. of DTM Primer and 1 Qt. of Hardener

  • Custom Shop – DTM Series High Build DIRECT TO Metal Primer Surfaceris a 4 to 1 Mix Ratio high performance primer specifically designed to be used  DTM (Direct to Metal) .  DTM Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat, Body Fillers and many properly prepared Rigid Plastics and sanded OEM Finishes..
  • DTM High Build Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion while adding the benefit of outstanding adhesion. DTM also offers easy High Build Properties and is a fast dry product. Easy to Sand in as soon as 3 hours.
  • Custom Shop – DTM Series Primer is great as a DTM primer with an easy 4 to 1 Mix Ratio. And a low 2.1 Voc that can be used Coast to Coast.
  • DTM Primer Surfacer is Available in Primer Gray with 1-1/4 Quart and 1-1/4 Gallon kits available. Great for Automotive and Industrial applications. DTM is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
  • Custom Shop DTM High Buid Primer Surfacer offers superior sanding characteristics and excellent To....
Check Stock

Custom Shop Premium Black Self Etching Primer, 1 Gallon - Ready to Spray Paint, Excellent Adhesion to Bare Metal, Steel, Aluminum, Fiberglass - Use on Automotive Car Parts, OEM Industrial Coating

  • 1 Gallon (3.8 Liters) Can of Custom Shop Premium Self-Etching Acid Etch Primer. Black primer color. It etches and primes bare, rust-free metal in just one step..
  • Premium Self-Etching Acid Etch Primer is a ready-to-spray, self-etching primer with tremendous adhesion and flexibility properties. It provides excellent adhesion to the following properly prepared substrates: steel, aluminum, fiberglass, previously painted surfaces, wood, and some plastics..
  • It's a super primer with anti-corrosive properties, which makes it ideal for use over bare metals such as aluminum and steel. It's a perfect primer for fleet and OEM manufacturers..
  • This coating is fast drying and is sandable after 60 minutes. It also improves color holdout, gloss retention and has excellent inter-coat adhesion..
  • Ideal for use on properly prepared truck beds before the application of truck bed liner coatings. This primer works excellent under all major brands of truck bed liner coatings like Custom Coat, UPOL Raptor, and Gator Guard..
Check Stock

Custom Shop Premium Gray Self Etching Primer, 1 Quart - Ready to Spray Paint, Excellent Adhesion to Bare Metal, Steel, Aluminum, Fiberglass - Use on Automotive Car Parts, OEM Industrial Coating

  • 1 Quart (0.95 Liter) Can of Custom GRAY Shop Premium Self-Etching Acid Etch Primer. Gray primer color. It etches and primes bare, rust-free metal in just one step..
  • Premium Self-Etching Acid Etch Primer is a ready-to-spray, self-etching primer with tremendous adhesion and flexibility properties. It provides excellent adhesion to the following properly prepared substrates: steel, aluminum, fiberglass, previously painted surfaces, wood, and some plastics..
  • It's a super primer with anti-corrosive properties, which makes it ideal for use over bare metals such as aluminum and steel. It’s the perfect primer for fleet and OEM manufacturers..
  • This coating is fast drying and is sandable after 60 minutes. It also improves color holdout, gloss retention and has excellent inter-coat adhesion..
  • Ideal for use on properly prepared truck beds before the application of truck bed liner coatings. This primer works excellent under all major brands of truck bed liner coatings like Custom Coat, UPOL Raptor, and Gator Guard..
Check Stock