Reviews Epoxy Gelcoat Paint - BestBuyersPro.com

TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass Wood Aluminum and Steel 2 Pint Kit

HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids.
ideal for filling and fairing dents, holes and....
SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum,....
EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it....
CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F.
CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not....

FIBERGLASS CHIP REPAIR MADE EASY: One-part epoxy repair filler to fix fiberglass boat damage.
It’s a complete fiberglass repair kit for boats in one tube..
EASY GELCOAT REPAIR KIT: Just clean, apply, level and wipe away smears.
Fixes chipped fiberglass and deep cracks in seconds..
This fiberglass repair product is available in most popular boat gelcoat colors.
Use it on all ‘above the waterline’ areas of boats, ceramic cracks or porcelain chips, carbon fiber, aluminum, PVC, acrylic and plastic..
ULTRA TOUGH – LIFETIME DURABILITY PROTECTION.
Nanotechnology inside this marine epoxy repair filler penetrates deep into pores.
it’s non-toxic, water resistant, and non-hazardous..

FIBERGLASS CHIP REPAIR MADE EASY: One-part epoxy repair filler to fix fiberglass boat damage.
It’s a complete fiberglass repair kit for boats in one....
EASY GELCOAT REPAIR KIT: Just clean, apply, level and wipe away smears.
Fixes chipped fiberglass and deep cracks in seconds..
This fiberglass repair product is available in most popular boat gelcoat colors.
Use it on all ‘above the waterline’ areas of boats, ceramic cracks or porcelain chips, carbon fiber, aluminum, PVC, acrylic and....
ULTRA TOUGH – LIFETIME DURABILITY PROTECTION.
Nanotechnology inside this marine epoxy repair filler penetrates deep into pores.

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

High-build two part epoxy primer and barrier coat for use above and below the waterline.
Excellent for gelcoat blister prevention and repair work on fiberglass boats.
Provides superior protection on all underwater metals.
Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..

FIBERGLASS CHIP REPAIR MADE EASY: One-part epoxy repair filler to fix fiberglass boat damage.
It’s a complete fiberglass repair kit for boats in one....
EASY GELCOAT REPAIR KIT: Just clean, apply, level and wipe away smears.
Fixes chipped fiberglass and deep cracks in seconds..
This fiberglass repair product is available in most popular boat gelcoat colors.
Use it on all ‘above the waterline’ areas of boats, ceramic cracks or porcelain chips, carbon fiber, aluminum, PVC, acrylic and....
ULTRA TOUGH – LIFETIME DURABILITY PROTECTION.
Nanotechnology inside this marine epoxy repair filler penetrates deep into pores.

High-build two part epoxy primer and barrier coat for use above and below the waterline.
Excellent for gelcoat blister prevention and repair work on fiberglass boats.
Provides superior protection on all underwater metals.
Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..

High-build two part epoxy primer and barrier coat for use above and below the waterline.
Excellent for gelcoat blister prevention and repair work on fiberglass boats.
Provides superior protection on all underwater metals.
Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..