Reviews Epoxy Adhesion

Oatey 31270 Tubes Epoxy Putty, Display 4-Ounce, Sold as 3 Pack

  • ...tty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

Epoxy Putty, 120g 2 Part Fast Repair Epoxy Glue, Metal, Plastic, Wood, Glass, Ceramic Crack Filler, Heat Resistant and Waterproof (Grey)

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

TotalBoat 2-Part Marine Epoxy Primer Off White High Build Primer Quart

  • 2-Component epoxy primers provide maximum adhesion & improved durability for urethane topcoats on fiberglass, metal, and previously painted surfaces.....
  • The Surfacing Epoxy Primer formula is great for sealing faired substrates ready for topcoat application..
  • The High Build Epoxy Primer formula is ideal for covering pinholing and filling other minor surface defects..
  • Dries fast and is easy to sand. Overcoat with 1- and 2-part urethanes. For use above and below the waterline..
  • Choose primer type, size, and color: Surfacing Primer is available in Quart and Gallon size kits, in Gray and Off White.
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 qt & Dynatron 3 Pack Spreaders, 358

  • Product 1: EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • Product 1: IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • Product 1: OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • Product 1: BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes an....
Check Stock

Booshow Resin Tape for Epoxy Resin Molding, Silicone Adhesive Tape, 2 inch Wide 164 Feet Long Traceless Craft Tape for Making River Tables Hollow Frame Bezels Epoxy Resin Craft Pendant

  • High-Tempreture Resistant: It won’t melt or leave a messy residue behind making it ideal for working with epoxy resin. Unlike rubber and acrylic adhesives that can’t stand the heat, our tape resists curling, shrinking, and lifted edges for a sharp paint line every time..
  • Silicone Adhesive, Chemical & UV Resistant: Our high heat silicone adhesive tape retains adhesion while exposed to chemicals and UV lights. Ideal for resin epoxy crafting, suitable for jewelry making or deep pours when creating an epoxy table and other projects..
  • High-Quality Material: Our traceless epoxy resin tape is made of PET Film, self-adhesive with moderate viscosity, easy to stick or remove..
  • Good Stickiness & Residue Free-Our premium epoxy craft tape is self-adhesive, making it ideal for holding the resin on the open bezel resin craft, no residues after the craft project completely cured when you tear out the traceless epoxy tape..
  • Wide Applications: Every roll of our heat resistant epoxy tape is 2 inch in width and 57.6 yards in length, enough for making a beautiful epoxy river table. You can also cut it into any size according to your need, ideal for powder coating, making hollow frame bezels and epoxy resin craft pendants..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

Pixiss Epoxy Resin Tape Mold Release Tuck Tape for Epoxy Resin - Extra Wide Epoxy Mold Release Tape, Polyester Tape for Resin UV Tape Release Film, Tape for Epoxy Resin Molding Easy Peeling

  • High Temperature Resistance – Pixiss Resin Tape is highly resistant to heat and will not melt. This is ideal when working with epoxy resin and resin building. This epoxy tape will not curl or leave behind residue. The Pixiss epoxy resin tape works great with pour on epoxy and molding resin that can create stunning projects..
  • Chemical & UV Resistant Silicone Adhesive – Our high temp tuck tape for epoxy resin retains adhesion while exposed to chemicals and UV lights. Ideal resin tape for epoxy resin molding, crafting suitable for jewelry making or deep pours when creating an epoxy table and other projects..
  • High Quality Material – Our traceless epoxy resin tape is made of PET Film, self-adhesive with moderate viscosity, easy to stick on or remove from surfaces. This makes resin projects a breeze!.
  • Peel with Ease – Easily removed to not leave residue, destroying your hard work. Will not stick to your finished resin construction. Our resin tape is easy to work with as it detaches quickly and with no residue. This mold release tape works great when working with two part resin epoxy molds..
  • Wider Than The Competition – Pixiss Resin Tape is 3 inches wide and 108 feet long. Made from a durable, heat resistant PET material that is emerald in color..
Check Stock

To Paint or Not to Paint

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

Resin Tape for Epoxy Resin Molding and Epoxy Mold Release for Epoxy Resin Thermal Adhesive Tape for Micro Pour Epoxy Resin Tape and Form with UV Resistance Epoxy Tape - 2 inch Wide 150 Feet Long

  • NO STICK EASY REMOVAL: Our resin tape for epoxy resin molding retains adhesion to molds, wood frames or other pour encapsulating methods. Easy epoxy mold release for epoxy resin projects without leaving a messy residue..
  • CHEMICAL & UV RESISTANT: This epoxy resin tape can be exposed to chemicals, high heat and light making it ideal for crafting and working with professional marine grade epoxy or deep pour resin epoxy tape with other epoxy resin supplies..
  • HIGH-HEAT RESISTANT: This thermal tape or high temperature tape stands up to heat from chemical mixing & curing of 2 part epoxy resin kits making it suitable for crafts. Won’t tuck, curl or melt with resin heat gun or torch exposure.
  • USE FOR POWDER COATING: Silicone adhesive is suitable for high temperature applications and can be used as a powdercoat tape high temp tape, photo-splicing or as a sheathing tape. Green powder coating tape is easily visible when working..
  • WHY CHOOSE HIPPIE CRAFTER: We are a family owned American small business committed to producing professional grade art supplies made to strict, trade-secret standards. We pride ourselves on exceptional customer service and are here to offer support!.
Check Stock