Reviews Epdm Rubber Roofing - BestBuyersPro.com

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..

Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".

Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
Continuous Service Temperature Ranges of -58F to 239F (EPDM).
Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.

Includes four Gallons of Dicor White Acrylic Roof Coating, two quarts of Dicor Cleaner/ Activator, one 4 inch x 50 feet Roll Coating Ready Cover Tape, one Metal Pan, one 9 inch Paint Roller, two 9 inch Roller Covers, one roll 1 inch Masking Tape.
Each kit comes with a warranty and easy to follow instructions.
A polyester fleeced-back seam sealing tape for sealing cracks or tears in EPDM rubber or TPO RV roofing.
Individual components can be purchased separately.
Cleaner Activator: A low viscosity, pinkish liquid that chemically alters the EPDM surface to which it is applied creating a lock and key effect with the subsequent two coats of ACRYLIC COATING..

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

#10 Sheet Metal ROOFING SCREWS. Our metal roofing screws are galvanized for corrosion resistance..
1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

#12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

#12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".

#12 Sheet Metal ROOFING SCREWS. Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.