Reviews Engine Status Indicator

VDIAGTOOL VD30 Car Code Reader, Enhanced Mode 6 OBD2 Scanner for Turn Off Check Engine Light, CAN Diagnostic Tool, Universal Automotive Check Engine Code Reader with One-Click Smog Check, Red

  • ...igger a warning light. This check engine code reader brings a fast access to scan the car emissions-related error codes, retrieves generic codes, manufacturer specific codes, pending codes, permanent codes and displays DTC definitions on the TFT screen, troubleshooting the root causes, turn off the MIL (Malfunction Indicator Light) and erase the codes after fixed..
  • ➤【4 IN 1 GRAPHING LIVE DATA】- This engine scanner code reader can read data from vehicle sensors, show the real-time live data in text and graph intuitively and merge 4 PIDs into one to compare. Allows you to focus on any suspicious data and trend. Such as Engine RPM, Intake air temperature, Short/Long term fuel trim, Misfire data, Throttle position, Engine coolant temperature, Oxygen sensor voltages, Mass air flow and ect. Retrieve freeze frame data when the DTC occurred..
  • ➤【PASS SMOG CHECK BY ONE-CLICK I/M READINESS】 - Quickly show the status of the emission-related systems' status in the on-board computer and check if they are READY for inspection. Such as Misfire System, Fuel System, Intake Air System, O2 Sensor, Evap System and more. This car error code reader helps you pass the smog check easily, save your money for paying fine. Red-Yellow-Green Indicator Led and build-in....
Check Stock

DNA Motoring LEPOW-010 Aluminum Battery Box Relocation Kit 13.5\W x 9.5\D x 10\H

  • ...ious bad weather and other factors. At the same time, the isolator supports waterproof function, and the waterproof grade is IP67. (Only suitable for lead-acid battery to lead-acid battery or lithium battery to lithium battery).
  • 【Manual Modes】 Press and hold the "Power" button for 3 seconds, the upper blue (LED) indicator light is on, and the manual mode is turned on. In this mode, click the "Power" button to turn on/off the isolator. Click the "power" button, the lower red (LED) indicator light is on, and the isolator is turned on.
  • click the "power" button again, the lower red (LED) indicator light is off, and the isolator closure..
  • 【Automatic Mode】Long press the "Power" button for 3 seconds, the upper blue (LED) indicator light goes out, and the automatic mode is turned on. In automatic mode, the voltage-sensitive relay (VSR) cuts in at 13.3 volts, and the lower red (LED) indicator lights up. The voltage-sensitive relay (VSR) is cut off at 12.8 volts, and the lower red (LED) indicator light turns off.
  • 【LED SCREEN REAL-TIME VOLTAGE DISPLAY】 The surface of the isolator is equipped with an LED display to display the current-voltage status in real-time, allowing you to control the battery status at any time..
Check Stock

Innova 3030h OBD2 Scanner / Car Code Reader with Severity Alert and Emissions Check

  • CHECK ENGINE LIGHT – 3030h can quickly figure out what that pesky check engine light means on any foreign or domestic 1996 and newer OBD2 car, light truck, SUV, and/or hybrid..
  • FREEZE FRAME – You can freeze frame the reading for the fuel trim, engine coolant, and more at the time the Malfunction Indicator light turns on..
  • AUTO-REFRESH – When connected to your vehicle, the data refreshes automatically every 30 seconds for up-to-date readings..
  • PRIORITIZE THE DTC – 3030h has an easy-to-read screen that displays the severity of the code, allowing you to triage when you need to make the repairs..
  • EMISSIONS PRE-CHECK – Check on your emissions status with the 3030h, using the red, yellow, and green LEDs to pre-determine whether you’ll be able to pass the check..
Check Stock

uxcell Signal Indicator Light AC/DC 12V-24V 8mm Green LED Metal Shell

  • Energy saving and low maintenance cost. Flush mount for easy connection and strong conductivity. Simply drill a hole and install with nut and washer..
  • For use as brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights..
  • These panel mount pilot lights are sure to give you a visual status cue of any indexing signal, anticipating signals, emergency signal and other....
Check Stock

GASHER 110V/24V/12V 20mA Energy Saving Indicator Light Mounting Hole Size 12mm 1/2 inch Green Yellow Red Blue White 5 Pcs

  • 【Product Features】Waterproof Rating: IP65.
  • 【Easy to Use】Energy saving and low maintenance cost. Flush mount for easy connection and strong conductivity. Simply drill a hole and install with....
  • 【Application Range】For use as brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and....
  • 【Indicator Light】These panel mount pilot lights are sure to give you a visual status cue of any indexing signal, anticipating signals, emergency....
Check Stock

GASHER 12V/24V/110V 20mA Energy Saving LED Indicator Light Mounting Hole Size 22mm 7/8 Inch Green Yellow Red Blue White 10 Pcs

  • 【Product Features】Waterproof Rating: IP65.
  • 【Easy to Use】Energy saving and low maintenance cost. Flush mount for easy connection and strong conductivity. Simply drill a hole and install with....
  • 【Application Range】For use as brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and....
  • 【Indicator Light】These panel mount pilot lights are sure to give you a visual status cue of any indexing signal, anticipating signals, emergency....
Check Stock

Autel MS309 Universal OBD2 Scanner Engine Fault Reader, Read Clear Codes, View Freeze Frame Data, I/M Readiness Smog Check CAN Diagnostic Scan Tool

  • ... This little code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes and displays DTC definitions on the TFT color screen. It can check engine related fault codes, easily find out what caused the check engine light comes on, turn off MIL light(Malfunction Indicator Light)..
  • FREEZE FRAME DATA FOR ACCURATE DIAGNOSIS: This MS309 check engine code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive cycle verification time. It includes important engine parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc..
  • READINESS STATUS TO PASS SMOG CHECK: The Autel MS309 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP system and etc, making this OBD2 scan tool an excellent scan tool to help get your vehicle ready to pass the annu....
Check Stock

POTEK Car Jump Starter with 150 PSI Tire Inflator/Air Compressor,1000 Peak/500 Instant Amps with USB Port to Charge iPhone ,IPad, Kindle

  • [HIGH PERFORMANCE] POTEK 1000 Peak/500 Instant Amps Car Jump Starter, an emergency life saver when you are out,perfect for long driving, camping, biking..
  • [AIR STATION TIRE INFLATOR] The 150PSI air compressor takes 6~8 minutes to inflate a regular car tire to 30 PSI. Suitable for bicycle,car, balls and Other Inflatables.
  • [USEFUL FOR CHARGING DEVICES]With the USB port,you can charge your iphone,kindle or pad,what’s more,you can charge any 12V appliance like inverter, vaccum or mini fridge with the 12 volt power outlet sockets..
  • [TWO WAYS FOR CHARGING]Equipped with 12 Volt lead acid Battery,not only can charge with AC adapter at home but also can charge it with DC adapter in your car..
  • [LED INDICATOR] Know your battery status from the indicator,The red charging status LED light will illuminate to indicate the unit is charging. The battery status indicator will illuminate red-yellow-green- green respectively when the unit is fully charged.Charging current will automatically go to floating charge(maintaining status)..
Check Stock

NEXPEAK Professional OBD2 Scanner NX501 with Brake Fluid Tester Pen

  • OBDII Professional Quality Auto Scanner: The NEXPEAK NX501 is an enhanced OBD II professional auto scanner that allows you to check all engine related fault codes, troubleshoot check engine light alerts, turn-off the Malfunction Indicator Lamp (MIL), and locate bad O2 sensors. It also empowers you to proactively monitor car battery health status, alerting you when it’s time to replace your battery. It’s the perfect scan tool for fixing and maintaining your car, helping you save time and money..
  • Brake Fluid Tester: Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or not. Keep safe driving..
  • Brake Fluid Tester: Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • OBDII Scan Tool: Wide Array of Compatibility: Accurately read and erase error codes on all OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). The NEXPEAK NX501 is compatible with most US vehicles that are model year 1996 or later – including sedans, SUVs, light trucks, and 12V diesels. This is a plug-and-play engine diagnostic code reader (both generic and manufactur....
Check Stock

Terisass Steering Wheel Carbon Fiber Automotive Racing Steering Wheel LED Shift Lights Display Steering Wheel Fit for for Dodge Challenger/Charger SRT HELLCAT 2015-2020

  • There are 5 groups of LEDs: There are 5 groups of LEDs on both sides of the steering wheel, which gradually light up in green as the engine RPM increases.
  • after reaching the configured RPM, the indicator light will flash red to remind you to shift up.
  • lED shift indicator, adjustable range is 500RPM to 9900RPM, and has adjustable RGB shift light color.
  • Shift indicator: The shift indicator can display the lateral and longitudinal acceleration values ??of 0-60 mph quarter mile and one lap time, and display effective dynamic data.
Check Stock