Reviews Engine Oil Sender

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2014-2017 Jeep Wrangler Dodge Challenger Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors

  • *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made with new ABS, NOT recycled ABS( which will leak after using for 6 or fewer months.).
  • Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Even the seal is made of good rubber. Well-made copper base and port. Intake Manifold Gasket Set is made of high-quality silicone..
  • This Engine Oil Cooler Filter is Compatible with 3.6L 2014-2017 Jeep Wrangler Grand Cherokee Dodge Avenger Challenger Charger Caravan Chrysler Town & Country..
  • Oil Cooler is Replacement for 2014 2015 Dodge Durango.
  • Ram C/V. 2014 Dodge Avenger.6 Cyl 3.6L. 2014 2015 2016 2017 Chrysler 200,300.
  • This Cooler comes with Temperature Sender Sensors! Tips: To prevent leaks or other problems, make sure each washer is installed in the right place. Please make sure that the oil port/hole is appropriate, some users said that the size is too large for their models, only simple grinding can be normal installation. Any questions, please contact us for help..
Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter K20 K24 Engine Swap Fit for Honda Civic with Fittings Adaptor 3/8-1/8NPT

  • FUNCTION: To make sure that your cluster still keeps you informed of the Temperature of your engine you need to install this Adapter..
  • APPLICATION: This K-Swap Coolant Temperature sender Sensor Adapter Fit for Any k-swap engine k20 k24，Acura integra，Honda civic，Honda Crv，Accord，Crx，MR2..
  • FEATURES: This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
  • PACKAGE INCLUDE: 1x Fitting Adaptor，1x Universal Coolant Temp Sender Sensor..
  • FREE RETURN AND WARRANTY: We accept free return and replacement if it is not the correct one. And Guarantee with One Year Limited Warranty..
Check Stock

Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2011-2013 Jeep Wrangler Dodge Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors 5184294AE

  • *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made of new ABS, NOT recycled ABS( which will leak after use for 6 or fewer months.).
  • Seal upgrade, New Fluororubber gaskets are more durable, Oil and temperature resistant. Even the seal is made of good rubber. 12 pcs Intake Manifold Gasket Set is made of high-quality silicone. Well-made copper base and port, as well as the thread sealant on sensor connectors, can maximumly prevent oil leakage..
  • This Engine Oil Cooler Filter is Compatible with 2011 2012 2013 Jeep Wrangler Grand Dodge Grand Caravan Chrysler 200 300 Town & Country Ram 1500. OE 926-876,926-959, 5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB. Please check the fitment before ordering..
  • Oil Cooler is a Replacement for 2011-2013 Dodge Journey.
Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

MOTOR METER RACING EVO Series Digital 6 Gauge Set Includes GPS Sensor mounting kit

  • Specification Speedometer & Tachometer: Standard 3-3/8" (85mm) dial and 3-3/4" (95mm) opening. EVO Gauge Set requires any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Red, Blue, White & Green to be select as displaying light color, brightness adjustment.
  • 4 types of dimmer setting where the color can be shift according to users' needs in different conditions..
  • Specification Water Temp, Volt, Oil Pressure & Fuel Gauge: Standard 2"(52mm) dial 2-1/16"(52.4mm) opening. Red & Blue to be select as displaying light color, brightness adjustment..
  • Features: EVO 6 Gauge Set applying the latest LCD movement technology with the display of precision. It is designed for in-dash usage, while suitable on-dash mounting cups available to be ordered — flat clear acrylic lens with plastic housing, designed to be installed with ease..
  • Packaged: Speedometer GPS sensor and convector, fuel level sender, water temp sensor (Thread size: 1/8 NPT), oil pressure sensor (Thread size: 1/8 NPT), 3-3/8" mounting stand (2 pcs), wiring harness, installation manual..
Check Stock

Zerodis CO2 Refilling Adapter, Adjustable CO2 Cylinder Refill Adapter Valve CO2 Tanks Bottle Connector Accessories 3000psi Pressure Gauge

  • Works for oil,fuel,diesel,gas,water,air pressure. Can be used in oil tank,gas tank,diesel tank etc..
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Pressure and Pull Pressure Sensor..
  • Input 5V DC,Output: 0.5V – 4.5V linear voltage output.
  • Package Include: 1 X Pressure Transducer.
Check Stock

FASTROHY 0.5-4.5V 60 Psi Universal Pressure Transducer Sender/Sensor Solenoid for Oil Fuel Diesel Gas Air Water,Gauge Pressure 1/8\NPT Thread Stainless Steel

  • Works for oil,fuel,diesel,gas,water,air pressure.
  • Can be used in oil tank,gas tank,diesel tank etc.
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Load Cell Sensor. CMC for Pressure and Pull Pressure Sensor..
  • Package Includes: 1PC x Pressure transducer (With cable).
Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter - Compatible with Honda Civic - Compatible with Acura Integra - K20 K24 Engine Swap

  • K-Swap Coolant Temperature sender Sensor Adapter.
  • Designed for old chassis Hondas with K20, K24 engine swap.
  • You need this adapter to make sure that your cluster still keeps you informed of the Temperature of the engine.
  • This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
  • For K20, K24 Engine Swap - Compatible with Acura integra - Compatible with Honda civic, Honda Crv, Accord, Crx, MR2.
Check Stock