Reviews Engine Oil Pump Intermediate Drive Gear

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock

OEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
  • Manually suction fluid with the engine oil pump's oversized handle.
  • Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • The built-in shutoff prevents overfilling the extractor pump reservoir.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock

Northstar Gas Cold Water Portable Pressure Washer Power Washer - 4200 PSI, 3.5 GPM, Honda Engine, Model Number 157127

  • Honda GX390 OHV engine for quiet, reliable performance.
  • CAT 66DX direct drive crankshaft triplex pump with thermal protection and ceramic plungers.
  • Oil drain cutouts for quick, clean engine and pump oil changes.
  • Easy Start prevents pressure buildup for smoother, easier recoil pulling.
  • Adjustable pressure allows easy control of the PSI to suit any job.
Check Stock

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

  • PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
  • LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
  • FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
  • TECHNICAL PARAMETERS ➤ Material: Metal &....
Check Stock

SMOTIVEPRO Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump Capacity 500CC

  • SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
  • Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
  • Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
  • Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Check Stock

weelye 24V 30000RPM Gearbox, 24V DC Motor for Kids Ride on Car SUV Parts, Electric Motor with Gear Box 24 Volt High Torque Motor Match Children Ride on Toys Accessories

  • 24V30000RPM Drive Engine for Kids Ride On Car.
  • 24V drive engine is made of high strength plastic board combined with high quality motor.
  • Specially customized for car modification ( High Speed )Intermediate gear upgrade to iron, more durable!.
  • Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!Please pay attention to the motor model.
  • Please check if your car is working properly. (Whether the battery is damaged, the battery cable is connected.).
Check Stock

Mplus M176 Oil Pump Kit Replace for 1991-2008 for Ford, for Lincoln, for Mercury 4.6L 5.4L 6.8L V8 SOHC 16V 21mm Inlet Only for Windsor, Romeo Engine

  • Car Fitment-1992-2008 for Ford Crown Victoria / 1996-2004 for Ford Mustang GT / 1997-2004 for Ford Expedition / 1997-2008 for Ford F Series Trucks / 1997-2004 for Ford F 150 Trucks / 1997-2008 Ford E Series Vans and more, please confirm this item fits for your vehicle before purchasing (Check Fitment Data Above or see description below).
  • OE Part Number-F5A2-6600B, 5L3Z-6600-A, 5L3Z-6600-AA. Mplus Oil Pump are certified to ISO/TS16949:2009 and ISO14001..
  • High Performance-Our Aluminum die cast technology allows for size and weight reduction.Lubricates critical components to maximize the life of the engine. Mplus Oil Pump aims to deliver ideal oil pressure to the engine without creating excess load..
  • Installation Tips - Most oil pump sits right at the front of the engine and is driven by a gear on the crankshaft. You need to remove the oil pan firstly and then replace the bad oil pump from underneath. You could also ask help for a professional mechanic..
  • Buy with Confidence- Our local US-based team and inventory offer 24-hours professional after-service and fast shipping. We also offers 2 years or 40000 miles warranty, please buy with confidence..
Check Stock

EVAR V8 Engine Model Kit That Works for Adults, V8 Engine Internal Combustion Engine Model DIY Assembly Kit for AX90104 SCX10 Capra VS4-10 Pro/Ultra Model Car

  • Design: V8 internal combustion engine structure and principle design, pulley winding drive structure, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, screw near and far valve intake manifold, oil pan structure, power drive plate plug interface..
  • Performance: based on pre colored products, users need to install. The V8 engine model can simulate electric operation. At the same time, considering the stability and reliability of operation, we made a full bearing structure of the drive part in a small space..
  • Application: Analog V8 engine is applicable to many RC models, such as AX90104, SCX10, Capra, VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powerful, but it is also a good decoration, which can exercise the ability to assemble and restore the V8 engine..
  • Tip: This engine kit does not include a bracket. You can select the corresponding engine bracket according to your model. The engine and bracket are sold at the same time..
Check Stock