Reviews Engine Oil Pressure Sending Unit

Mr Gasket 7872 Fuel Pump Safety Switch

  • Designed to ensure that the electric pump does not work unless the engine has oil pressure.
  • Crafted from high quality material for long lasting durability.
  • Prevents the pump from running in a situation where the motor may stall with the ignition on.
  • Continues to provide power to the pump as long as there is oil pressure to keep the switch turned on.
  • Installed with the pressure sending unit using a T fitting into the block.
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

AEM Electronics 3 Gauges Combo Set UEGO 4.9LSU WideBand Air/Fuel ratio + Turbo Tru-Boost Controller + Oil Pressure

  • Includes: AEM Digital Wideband UEGO Gauge AEM 52mm Pressure (Oil or Fuel) Digital Gauge AEM Tru Boost 52mm Boost Controller/Gauge **Not CARB legal: Not for sale or street use in CA & CARB states..
  • Wideband UEGO air/fuel ratio gauge: Gauge Style: AEM Wideband UEGO Gauge Series: Digital Gauge Type: Air/Fuel ratio Gauge Range: Lean-rich Shape: Round Gauge Size (in): 2 1/16 in. diameter Gauge Size (mm): 52.39mm diameter Sweep: Digital numeric Sending Unit: Electrical Gauge Face Color: Black/White Gauge Number Color: Red Bezel Finish: Black/Silver OEM Replacement: No Sending Unit Included: Yes.
  • OIL / FUEL PRESSURE GAUGE: Gauge Style: AEM digital Gauge Series: Digital Gauge Type: Pressure Gauge Range: 0-100 psi Shape: Round Gauge Size (in): 2 1/16 in. diameter Gauge Size (mm): 52.39mm diameter Sweep: Digital numeric Sending Unit: Electrical Gauge Face Color: Black/White Bezel Finish: Black/Silver OEM Replacement: No Sending Unit Included: Yes.
  • EM Electronics TRU-BOOST gauge-type controller kits feature an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boo....
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

5PCS Oxygen O2 Sensor Socket Wrench 22mm Removal Tool Thread Chaser Set

  • 【WHAT YOU GET】 1PC 1/2'' Drive x 27mm oil pressure sending unit socket. 1PC 1/2'' Drive x 29mm pressure/vacuum switch socket with slot. 1PC 1/2'' Drive x 7/8'' long sensor wrench socket with slot. 1PC 3/8'' Drive x 7/8'' vacuum switch socket with slot. 1PC 3/8'' Drive x7/8'' (6 point) vacuum switch socket with slot. 1PC 3/8'' Drive x 1-1/16'' & 1'' (6 point) oil pressure sending unit socket. 1PC 3/8'' DR x 7/8'' (6 point) short sensor wrench socket with slot..
  • 【FUNCTION】 Designed for the removal and installation of sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes on most vehicles. Provide additional leverage even in hard-to-reach places. We offers premium after-sales service and technical support to each customer..
  • 【FEATURES】 Constructed of high performance chrome vanadium for strength and durability. Finished with Black Oxide to avoid rust. Side cutout design allows easy access to from section and avoids from damage to wire..
  • 【PLUG AND PLAY】 Universal 6-point 7/8” (22mm) socket opening fits all hexagon sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • 【1 YEAR WARRANTY】 We provide 1 year warranty, support replace, return and refund service. We will random....
Check Stock

A ABIGAIL GSS342 255 LPH High Flow Electric Intank Fuel Pump with Installation Kit

  • This fuel pump comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise..
  • The purpose of a fuel pump is to convey the required quantity of fuel from the tank to the engine at the necessary pressure..
  • While this is not a genuine OE part it is a direct replacement for the factory fuel pump sending unit & fuel pump assembly..
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Wire harness and Tank Seal.
  • Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict actual item and....
Check Stock

GlowShift Replacement 2 Post Oil Pressure Gauge Sensor Sending Unit 1/8-27 NPT Thread

  • Replacement Electronic 0-100 PSI Oil Pressure Gauge 2 Post Sensor Sending Unit.
  • Compatible with GlowShift 7 Color Series Oil Pressure Gauge - Previous Model (GS-T704, GS-C704, GS-W704).
  • Compatible with GlowShift 10 Color Digital Series Oil Pressure Gauge - Previous Model (GS-TCD04).
  • Compatible with GlowShift Tinted Series Oil Pressure Gauge (GS-T04).
  • Compatible with GlowShift Blue & Red Digital Series Oil Pressure Gauge (GS-BD04, GS-RD04).
Check Stock