Reviews Engine Oil Cooler Gasket Kit

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

3mirrors Aluminum Engine Oil Cooler Filter Housing Adapter Replacement for 2017 2018 Dodge Chrysler 3.6L & 3.2L Oil Radiator Assembly 68310865AB with Sensor& Manifold Gaskets 68310865AA, 68310865AC

  • Direct Replacement OE number, 68310865AB, 68310865AA, 68310865AC, Engine Oil Cooler Compatible with 2017 2018 Ram 1500 ProMaster 1500 ProMaster 2500 ProMaster 3500 3.2L and 3.6L engines..
  • The Oil Cooler is a Replacement for 2017 Chrysler 200.
  • It's an Upgraded Aluminum alloy oil cooler housing kit, The radiator parts are welded layer by layer of aluminum alloy plates, with High and low-temperature resistance. All parts are tested with high-pressure fluid..
  • The Oil Cooler Filter will help you solve the problems of oil leaking, oil temperature too high and oil pressure too low. A good oil cooler filter assembly can keep the engine running normally, making you have a safe and comfortable driving experience. A worthwhile investment for your car..
Check Stock

Oil Filter Housing Oil Cooler Kit - Compatible with 2014-2017 3.6L Dodge Avenger, Journey, Durango, Jeep Wrangler, Grand Cherokee, Chrysler 200, 300, Town & Country - Replace 68105583AF 68105583AE

  • OIL FILTER HOUSING OIL COOLER KIT - Also known as Oil Filter Adapter or Oil Cooler Housing, encases and protect the oil filter for your vehicle, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine..
  • FIT THE FOLLOWING VEHICLE - Compatilbe with 2014-2017 3.6L V6 Pentastar, including 2014-2017 Chrysler 200, 2014-2017 Chrysler 300, 2014-2016 Town & Country, 2014 Dodge Avenger, 2014-2017 Dodge Challenger, 2014-2017 Dodge Charger, 2014-2015 Dodge Durango, 2014-2017 Dodge Grand Caravan, 2014-2017 Dodge Journey, 2014-2017 Jeep Cherokee, 2014-2015 Jeep Grand Cherokee, 2014-2017 Jeep Wrangler, 2014-2017 Ram 1500, 2014-2015 Ram C/V, 2014-2018 Ram ProMaster 1500 2500 3500..
  • REPLACE PART # - Oil cooler replace Mopar 68105583AF 68105583AA 68105583AB 68105583AC 68105583AD 68105583AE, include Oil Filter, Temp Sensor, Bypass Valve, Spring, and Gasket. Commonly found on 14, 15, 16, 17 Chrysler 200, 300, Town & Country, Dodge Avenger, Challenger, Charger, Durango, Grand Caravan, Cherokee, Grand Cherokee, Wrangler, Wrangler JK, Ram 1500, C/V, ProM....
Check Stock

Mishimoto MMOC-F2D-03 Replacement Oil Cooler Compatible With Ford 6.0L Powerstroke 2003-2007

  • Function: Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Replaces Part Number: 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD Replacement for 2014-2017 Journey, Wrangler, Ram Promaster 1500, 2500, 3500.
  • Replacement for: 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country, 2014 Dodge Avenger, 2014-2018 Dodge Challenger, 2014-2017 Dodge Charger, 2014-2015 Dodge Durango, 2014-2016 Dodge Grand Caravan, 2014-2017 Dodge Journey, 2014-2016 Dodge Ram Promaster, 2014-2017 Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine.
  • Easy Installation: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
Check Stock

PPE Heavy-Duty Ford Oil Cooler including Viton Gasket Kit (2003-2007 Ford Powerstroke 6.0L) - 314030310

  • Available for: Ford Powerstroke 2003-2007 6.0L.
  • Promotes more effective engine oil cooling.
  • Supplies cooler oil to your injectors and high-pressure oil pump.
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

KIMISS Towing Hitch Engine Oil Coolers & Kits, Motorcycle Engine Oil Cooler Oil Cooling Radiator Kit for Honda CB CG 100CC-250CC(85ML-Silver)

  • 【Required accessories】Whether you're using a top-down corner engraving or pulling down a tow, your high speed requires a reliable and efficient cooling system..
  • 【Minimal pressure loss】With minimal pressure loss, the kit uses a large oil drain cooler mounted in the front grille for optimum airflow and cooling..
  • 【Funtion】Cooling the engine temperature keeps the engine within normal operating temperature range, reducing engine load and extending its life..
  • 【Two choices】Invisible black and stylish silver cooler options include pre-assembled stainless steel cords and special mounting brackets for a painless, clean installation..
  • 【Fitment】Motorcycle Oil Cooler System Kit, Fit for Honda GY6 100CC-150CC Engine. Transmission Cooler Mounting Kit Oil Cooler Lines.
Check Stock

Engine Oil Cooler Kit With Gasket Compatible with Nissan Altima Sentra Rogue 2.5L 2007-2013 Replaces 21300-JA06A 21304-JA00A

  • Compatible with Nissan Altima 2007-2013| Nissan Sentra 2007-2011.
  • Replace Part Number : 21300-JA05A, 21300-JG36A, 21300-JA06A, 21304-JA00A, 21300JA05A, 21300JG36A, 21300JA06A, 21304JA00A.
  • Function: It is designed to keeping your engine's oil at a constant temperature, also helps to cool them slightly,and in order to extend engine’s life..
  • Package Including: 1 X Engine Oil Cooler, 1 X Oil Cooler Gasket.
  • One Year Warranty available for our this item.Please check picture about replace part number and fitment information..
Check Stock

Jobs USA Search

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock