Reviews Engine Flywheel

Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX

  • Chelhead LS flywheel locking tool Compatible with Chevy LS 1 2 3 LSX, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines).
  • TIG welded using 1/4" cold rolled USA Steel, proven design for strength and reliability.
  • Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth.
  • ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
  • Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts.
Check Stock

Tachiuwa Mini Hot Educational Toy Engine Model Kits

  • Great for cultivating students' interest in physics, more intuitive and easy to understand how engergy is converted into mechanical work..
  • Hot air stirling engine motor model kit physics teaching aids educational toys.
  • A stirling engine is a engine that operated by cyclic compression and expansion of air or other gas at different temperatures, such that there will be a net conversion of energy to mechanical work..
  • Burnning the alcohol lamp for a while, the expansion of air in the tube will work as a medium to run the pistons and flywheel, then the expanding air will be cooled in cold chamber. As this process will be repeatedly circulating, the flywheel will continuously work..
  • The hotter the tube gets, the faster the flywheel goes. Very interesting!.
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

DjuiinoStar Mini Hot Air Stirling Engine: A High Performance Pocket-Sized Working Model

  • ★EASY OPERATION: it's ready to run. All you have to do is to take it out of the box and fill the lamp with 95% alcohol to heat the glass cylinder.
  • then, after warming up for seconds, give the flywheel a spin and it will rotate rapidly and smoothly.
  • besides, you can also assemble the free DIY set onto the flywheel to get the fan rotating. Just within 5 minutes, people around the machine will be surprised and wonder how it works. A great desktop toy, TONS OF FUN!.
  • ★WIDE APPLICATIONS: it's a vivid model displaying basic principle of external combustion engines. People bought it for kids' science project, physics/mechanics learning, etc., enlightening them to explore more scientific knowledge. This engine is also a well-designed and crafted mechanical toy suitable for people of all ages from all works of life. It will definitely be a fantastic gift for those you love..
  • ★A WORKING MODEL WITH CAREFULLY SELECTED MATERIAL: mirror stainless steel base with 4 rubber pads ensures its stability while working.
  • high grade spring steel stand is of high strength & hardness after the heat treatment, holding the brass tube tightly when getting this model going.
  • employ wear-resistant bearing rod and customized thickened quartz glass to improve its robustness.
Check Stock

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

Valeo 52151203 Solid Flywheel Conversion Kit Compatible with Select Mini Cooper Models, 2002-2008

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).
Check Stock

Valeo 52285615 Solid Flywheel Conversion Kit Compatible with Select Audi and Volkswagen Models

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).
Check Stock

Mini Stirling Engine Model, DIY Hot Air Stirling Flywheel Engine Kits, Suitable for Physics Experiment Educational, Physics Toys(Red)

  • [Brain Training] DYI toys are essential brain training toys for every child growing up - the DIY Hot Air Stirling Flywheel Engine. Once you have received the product, you will be able to put it together by studying it and finally feel a sense of achievement. Perfect for children and stress relief.
  • [Superbly Crafted] All accessories are sandblasted, CNC precision machining process,all parts are surface treated to prevent rusting,aluminum alloy flywheel, metal laser cut connecting rod, heating cylinder using custom 304 stainless steel, long-term heating reliable and safe! The heated cylinder is made of custom 304 stainless steel for reliable and safe long-term heating,no matter what angle it is, it shows the perfect pursuit of the product.
  • [Works of Art] The Stirling engine with its distinctive character and the elegant gift packaging are very impressive. It can be used as a classroom demonstration, as a gift for a child, or as an ornament for your desk or bookcase at home - a must-have for modelers.
  • [Easy to Use] We recommend using alcohol as fuel, fill the alcohol burner with 95% alcohol and light it, let the light burn on the cylinder for about 60-120 seconds, then gently touch the flywheel and you will find that the flywheel magically moves. Isn't it ....
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Valeo 52285616 Solid Flywheel Clutch Conversion Kit Compatible with Select Volkswagen Jetta Golf Beetle and Rabbit Models

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts,....
Check Stock