Reviews Engine Crankshaft Sprocket Kit

MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4' Bore 10T #40/41/420 China (Complete 3/4' Torque Converter Set)

  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft..
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors..
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain.
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
Check Stock

Orion Motor Tech Engine Timing Tool Kit, Crankshaft and Camshaft Timing Belt Locking Alignment Tool Set Compatible with Ford Focus Escape Transit Volvo S60 S80 V60 V70 More for 1.5L 1.6L VCT Engines

  • ...6-2020), Kugas (2012-2020), Pumas (2000-2002), and Transits (1977-1986).
  • the tool kit is also compatible with late model Volvo S60s, S80s, V40s, V60s, and V70s (2010-2020).
  • EASY TO USE: This OEM-equivalent engine timing belt tool set includes a sprocket locking tool, a camshaft alignment plate, camshaft setting bar, crankshaft pulley alignment tool, crankshaft timing peg, and all the pins necessary for locking the rest of your engine's timing.
  • 1 YEAR WARRANTY: Order this rigorously tested alignment tool set today, knowing that its strong warranty and our usual friendly 24/7 customer service ensure you'll enjoy worry-free shopping and maintenance experiences.
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

Engine Camshaft Timing Belt Tensioner Locking Alignment Tool Kit Compatible with Ford Fiesta Focus Fusion Escape More Volvo S60 S80 V40 V60 V70 1.5 1.6L VCT 1995 1996 1997 1998 1999 2000 to 2020

  • ...ike new. The different parts are made of heat-treated #45 steel and #A3 steel with a powder metallurgy camshaft sprocket lock..
  • EASE OF USE: This engine timing belt tool set comes equipped with a step-by-step user manual for quick and easy application. Included in the convenient storage box are camshaft sprocket and crankshaft pulley alignment tools, a camshaft alignment plate, a camshaft setting bar, as well as all the pins necessary for locking other various parts of your engine..
  • QUALITY ASSURANCE: Our parts have been rigorously tested to improve efficiency and provide the highest-grade tools on the market. Look to OMT for the finest craftsmanship and the most reliable parts that will fix your engine in no time. We back these parts with our usual strong warranty and friendly customer service, ensuring that you’ll enjoy their use for years to come..
Check Stock

Garage-Pro Aftermarket Timing Chain Kit Compatible with 1995-2004 Toyota Tacoma 16 Valves DOHC 3RZFE Eng.

  • Direct Replacement Timing Chain Kit Compatible with 1995-2004 Toyota Tacoma.
  • Direct Replacement Timing Chain Kit Compatible with 1996-2000 Toyota 4Runner and 1994-1998 Toyota T100.
  • Garage-Pro JCWREPT300103GP Features: Kit, With Sprocket (Gear), (1) Timing Chain, (1) Balance Shaft Chain, (1) Camshaft Sprocket, (1) Crankshaft....
  • Timing Chain Kit Interchangeable With: TK939, 94196S.
  • A high quality, Direct Fit OE Replacement Timing Chain Kit, with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items purchased thru....
Check Stock

AlveyTech #40/41/420 Chain 48 Tooth Sprocket for Go-Karts & Mini Bikes

  • 48 tooth sprocket for use with #40/41/420 chain..
  • Heavy-duty machined steel construction. Used on many go-karts and mini bikes..
  • Our #40/41/420 chain 48 tooth sprocket for go-karts (and mini bikes) is ready to transfer the radial power of your engine's crankshaft to the drive wheel..
  • Specifications: Weight: 2.55 lbs. Chain size: #40/41/420 Tooth count: 48 Overall diameter: 7-7/8" Central hole diameter: 2" Mounting hole diameter: 3/8" Mounting hole distance (side-by-side): 2" Mounting hole distance (across): 2-9/16".
  • May come in a black or silver finish, depending on stock..
Check Stock

VEVOR 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

  • FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable.
  • it can reduce the engine load and get more power..
  • 30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4″ and a 5/8″ drive clutch, suitable for all engines with 3/4 “straight crankshaft.The 3/4″ drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76″, Outside circumference: 27″（68.8cm / 27″), Width is 3/4”.（1.9cm / 0.75″). Center to Center of driver and driven: 6.7″（17cm / 6.7″)..
  • UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts..
  • COMPLETE ACCESSORIES: The torque converter clutch includes： 1x 3/4″ drive clutch； 1x 5/8″ drive clutch； 1 x Plastic Assy Cover；1 x Aluminum Mounting Plate；1 x Drive Belt； 1 x 10 Tooth Sprocket for #40/41/420 Chain； full mounting hardware. Fully equipped, worry-free installation..
Check Stock

52cc Gas Chainsaw Powered 20-Inch with Tool Kit 2-Cycle withstand Tree Limbing Pruning Cutting Wood Farm Trimming Tasks Handed Petrol Chainsaws

  • This chainsaw comes with a 20-inch bar and 52cc 2-stroke engine.Heavy duty aluminum crankshaft for maximum strength and durability.
  • Aluminum crankcase gasoline.Quick and easy chain adjustment.Sparing the user's arms and hands.Comfortable reduced vibration handle.Easy to maintain, dependable operation.Felling marks for correct felling direction.Maximum durability for tough applications.Easy and convenient to handle in any situation.Easy to handle.
  • Dimensions(without guide bar and chain) 410x235x265(mm)Fuel Mixture(Gasolins25:Two-cycle oil 1),Fuel tank capacity 550(m),Chain oil Motor oil SAE#10W-30 Oil tank capacity 260(m),Engine displacement 52(cm3)60(cm3),Maximum engine power 2kw/7500rpm,Maximum engine speed with cutting 10000rpm,Sprocket 7Tx0.325,Saw chain pitch,0.325(n),Saw chain gauge 0.058(in).
  • It is also able to efficiently prevent the dust enter the engine by engine clean air-intake system. It also features with anti-vibration design, which allows you to use it easily.The aluminum solid crankcase enables to withstand the high rotate speed. The electronic ignition with auto choke is easy for you to start it..
  • Heavy duty aluminum crankshaft for maximum strength and durability Combined start/stop switch make the chainsaw very easy and smooth to s....
Check Stock

DPTOOL Engine Camshaft Timing Locking Tool Kit Compatible with Ford Focus Fiesta Mazada 1.25 1.4 1.6 1.7 1.8 2.0 Twin Cam 16V Engine Ecoboost 1.6 Ti-VCT 1.5/1.6VVT 2.0 TDCi 303-1097 303-748 303-1550

  • ...en engine or rebuild required the cam pulleys to be removed and timed, for lockingthe camshafts in position to allow the variable valve timing pullys to be removed, kit also includdes HP pump sprocket retaining tool required during pump removal/replacement applications.
  • Kit Include: This kit have 9 tools, include: 1 Crankshaft Pulley Alignment Tool.
  • 1 Locks Camshaft Sprockets during Timing Belt service.
  • 12 Months Warranty: Made of high quality steel, high hardness, not easy to break, the surface is coated with black anti-oxidation layer or plated to prevent rust. We offer 12 months WARRANTY, we will refund or replace, if the timing tool have any quality problem , or you can contact us, we will serve you wholeheartedly.
Check Stock

Camshaft Locking Timing Tool Replacement for GM Dodge Chrysler Holden Colorado Compatible with Jeep Cherokee Wrangler 2.8L Diesel Duramax Engine VM 9991 VM 9992 EN-50029 EN-50030 EN-51025 EN-51104

  • ◇ Function: Used to lock camshafts and crankshaft in position when setting engine timing. include EN-51104 diesel pump locking tool, fits over the sprocket and engages the teeth as a means to hold the sprocket in position when removing or installing the retaining nut.
  • ◇ The locking tool fits the reluctor on one end, and bolts to the cylinder head face on the other to hold the camshaft in position to set base engine timing.
  • ◇ Fit Engine: VM64C / ENS / 49C / 50C / VM10D / VM11D / LWN / LWH (Duramax).
  • ◇ Application Vehicle: Compatible with Jeep/Chrysler 2.8L Diesel Duramax engines, compatible with Jeep Cherokee 2008-2011.
  • compatible with Jeep Wrangler 2007 onward.
  • compatible with Chrysler Grand Voyager 2008 onward.
  • compatible with Holden Colorado 2012 Onward / Trailblazer.
Check Stock