Reviews Energy Motherboard

MACHINIST B250 BTC Mining Motherboard, Intel LGA 1151 Computer Motherboard with 12 GPU Slots (Intel 6th/7th Gen, PCIe 3.0, mSATA, VGA+DVI, DDR4, USB 3.0) for BTC/ETH/ZEC Intel Skylake Full Series AII

  • 12 GPU high-speed slots: B250 mining motherboard supports the PCIe 3.0 protocol standard. The transfer rate of each PCIE X1 slot is 1000MB/s, and the transfer rate of PCIE X16 can reach 16GB/s. 12 PCIE slots is available for simultaneous use, maximizing the mining efficiency of the computer..
  • LGA 1151 cpu socket: Compatible with Intel 6th/7th generation Core i3/i5/i7 (Intel Skylake full series) and Pentium G series processors. (eg Intel Core i7-7700K, Core i5-6600, Core i3-6300 and Pentium G4400 etc.).
  • Strong expansion slot: Rich expansion interface including 1 PS/2 port, 2 USB 3.0 ports, 2 USB 2.0 ports, 4 SATA 2.0 ports, 1 VGA port, 1 DVI port and 1 HDMI-compatible..
  • Stable voltage output: The LGA 1151 motherboard is designed with stabilizing capacitors to reduce heat generation and save energy. Low power consumption, reducing noise, thus extending the working life of the motherboard..
  • DDR4 memory slot: This computer motherboard is designed with dual-channel DDR4 memory slot, supports 2133/2400/2666/3200MHz frequency, can be overclocked, and the maximum memory capacity is 32GB..
Check Stock

Vetroo 3 Pack 120mm ARGB & PWM Case Fans with Controller High Airflow Addressable RGB Motherboard Sync Computer PC Cooling Fans

  • ARGB Motherboard Sync: The RGB lighting can be synchronized with the 5V addressable motherboard and can be easily installed by connecting the standard....
  • PWM Smart Control: It can automatically adjust the fan speed according to the temperature of the chassis, energy saving and environmental protection..
  • Low Noise Operation: 8 vibration rubber pads and PWM speed adjust provides an excellent silent experience and great airflow.(Max. Airflow: 48.1 CFM,....
  • Controller and Remote Included: Customize RGB lighting and effects, adjust fan speed, create vivid, dynamic lighting and speed synchronized with the....
  • High-Performance Airflow: The fan operate between 800-1300 RPM, provide the better airflow and cooling for you case..
Check Stock

AMASAFETY Mining Motherboard BTC- T37 with 8 Slots for 8 GPU, VGA Interface Low Power Consume for Mining Machine, RAM DDR3 (4GB) and CPU Included

  • ✔️No need to change the bios for motherboard specially designed for mining.
  • ✔️Motherboard contains CPU and 4GB RAM ..
  • ✔️The voltage stabilizing capacitor can provide a stable voltage for your power supply equipment..
  • ✔️It can ensure quiet performance, low power consumption, less heat generation, energy saving and safe use..
  • ✔️Expandable port: 8*PCIE 16X (PCIE x1 GEN2), 1-SATA3.0 + 1*SATA2.0 + 1*mSATA2.0 hard disk interface..
  • ✔️Memory slot, 8 graphics card connector..
Check Stock

CP3 RGB Computer Fans Addressable 120mm Case Cooling Fan Dual Lighting Loop Quiet Fan Compatible with AURA Sync, PWM PC Fan for Computer Case&Liquid Radiator Fan Adjustable Speed: 1000-1800RPM(3Packs)

  • 【Precise PWM Control】 3x 120mm full function PWM fans. The speed was adjusted by between 1000~1800±10% RPM, finding your balance between quiet operation and extreme cooling, that supports automatic motherboard speed control. Powerful airflow when required, virtually silent at idle. Save energy and prolong the lifespan of fans..
  • 【Dual Light Loop】The dual light ring equips 18 separately controlled Addressable RGB LEDs provide 12 lighting modes, 8 different colors and various of RGB light effect. The RGB Fans compatible with AURA Sync. The colorful light effect is controlled by motherboard automatically. We also provide additional controller if your motherboard doesn’t not support AURA, that allow you could create your own immersive lighting effects without technical obstacle..
  • 【Extreme Cooling Performance】CP3 PWM Fan optimized heat dissipation and hydraulic bearing ensured ultra quiet working environment . The blades was designed with a focus on minimum the noise level and delivering the superior airflow which up to 54.51CFM. The hydraulic bearing has an long lifespan up to 30,000 hrs. That helps to keep your computer’s system stable as rock in life time..
  • 【Ultra Quiet Design 】 Equipped with double-sided shock absorbing silicone rubbe....
Check Stock

Asiahorse FS-9002 Pro 20+6LED(in and Outside Light efect) ARGB White 120mm Pwm Case Fan with 5V PWM Motherboard Sync/Analog Controller (9 Pack)

  • 1. Out Frame- 20 lights, In Frame 6 lights, 26 lights in total by Design. With RGB three colors, you can freely combine the best light effect without any defects..
  • 2. Enhanced shaft and Thermostability oil Design -The axis silicon steel plate uses a high level of 12 pieces, which greatly enhances the stability and heat dissipation of the fan，Add High-And-low temperature antiwear oil to make the fan quieter and prevent the oil from melting under high temperature..
  • 3. Analog ARGB controller – low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue, White, rainbow 1.0, and rainbow 2.0), Hundreds of LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds..
  • 4.Pwm Fan and Pwm Controller – After connecting to the PWM interface of the motherboard, The speed of the fan can be read through the motherboard software, Also the motherboard can automatically control the speed of the fan according to the temperature of the chassis，Efficient energy saving and environmental protection..
  • 5.New Soft Led Light Bar design-Can effectively protect the LED lamp from damage due to excessive tension when bending,The new LED light bar also increases the purity of the LED lamp..
Check Stock

ASIAHORSE FS-9002 Pro 20+6LED(in and Outside Light efect) ARGB Black 120mm Pwm Case Fan with 5V PWM Motherboard Sync/Analog Controller (5 Pack)

  • 1. Out Frame- 20 lights, In Frame 6 lights, 26 lights in total by Design. With RGB three colors, you can freely combine the best light effect without any defects..
  • 2. Enhanced shaft and Thermostability oil Design -The axis silicon steel plate uses a high level of 12 pieces, which greatly enhances the stability and heat dissipation of the fan，Add High-And-low temperature antiwear oil to make the fan quieter and prevent the oil from melting under high temperature..
  • 3. Analog ARGB controller - low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue, White, rainbow 1.0, and rainbow 2.0), Hundreds of LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds..
  • 4.Pwm Fan and Pwm Controller - After connecting to the PWM interface of the motherboard, The speed of the fan can be read through the motherboard software, Also the motherboard can automatically control the speed of the fan according to the temperature of the chassis，Efficient energy saving and environmental protection..
  • 5.New Soft Led Light Bar design-Can effectively protect the LED lamp from damage due to excessive tension when bending,The new LED light bar also increases the purity of the LED lamp..
Check Stock

Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit Hex Male-Female Brass Spacer Standoffs Laptop Screws for DIY Computer Build Electronic Projects Raspberry Pi Circuit Board etc.

  • 【HIGH QUALITY】Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build..
  • 【GOOD ASSORTMENT】The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment..
  • 【EASY TO USE】The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too..
  • 【MUTIPURPOSE】 The motherboard standoffs kits are versatile. If you are a DIY computer builder, a little M3 standoff kit box of these motherboard standoffs and screws is essential. The motherboard scre....
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws ​​package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....
Check Stock

SoundOriginal PC Motherboard Internal Speaker BIOS Alarm Buzzer (3pcs/Pack)

  • Motherboard speaker PC(Computer) Motherboard internal speaker.
  • System speaker Internal PC motherboard speaker used to hear post code beeps.
  • Piezo speaker, Aprox 3 inch long cable, reduces PC wiring clutter.
  • Bios speaker, Plugs onto the Speaker header connection on the motherboard.
  • 3pcs Motherboard Speaker Buzzer Mainboard Computer PC BIOS Beep Code.
Check Stock

Thermaltake Toughpower PF1 ARGB 1200W 80+ Platinum 16.8 Million Colors 18 Addressable LEDs 5V Motherboard Sync/Analog Controlled SLI Full Modular Power Supply PS-TPD-1200F3FAPU-1

  • [2-Way RGB control] - Control light via "color" "Mode" Button (7 light modes/8 Colors) or via 5V ARGB Sync motherboard.
  • [15 light modes via color mode button] - Wave/ spiral/ flow/ heartbeat/ ripple/ full lighted (Red, orange, yellow, green, blue, purple, pink, and white)/ spectrum mode/ light off.
  • [Sync with motherboard RGB software] - controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome through motherboards that have a 5V addressable RGB header.
  • [Ring Duo 140mm fan] - 16.8 million color 18 addressable LEDs Dual lighting Zones self-lubricated hydraulic Bearing pwn fan for maximizing airflow while minimizing noise.
  • [Ultra quiet smart zero fan] - fan works only when PSU working load goes over 40%. a switch At the back of the PSU can be turned off to have the fan spun constantly.
  • [Zero cable platform] - daughterboards are directly soldered to the Motherboard for better heat dissipation and impressive output power quality.
  • [Japanese capacitors] - 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
  • [80+ platinum and Intel C6/C7 States ready] - deliver up to 92% efficiency, PF1 ARGB Series optimized to work with all generations of Intel's processors t....
Check Stock