Reviews End Valve

SUMMERBUDDY Type B Hose Adapter & Plunger Valve & Pool Hose Holder for Above Ground Swimming Pool, 1.25' to 1.5' Pool Hose Adapter B & On/Off Plunger Valve for Threaded Pumps (2 Packs)

  • 【Multifunctional】This pool hose adapter is used for saltwater system of above ground swimming pool. If your pool inlet/outlet and pipe holder are 1.25" , but you want to install a 1.5" plunger valve, the adapter B will be the perfect solution..
  • 【Waterproof】The rubber ring or band on adapter B and plunger valve tightly with other pool parts to form a sealed space to prevent water leak..
  • 【Convenient】If you want to replace the filter element or upgrade a stronger filter, the plunger valve will help you to control water flow..
  • 【Safe】The pool pipe holder reduce the pressure of the water pipe on the pool wall, thereby reducing damage to the pool..
  • 【Easy installation】The pipe holder is installed between adapter B and inlet or outlet. The big end of pipe holder attach to 1.25" pool inlet or outlet. And the small end of the holder attach to small end of adapter B, then fixed them with clamps. Last, the big end of adapter B attach to the threaded end of plunger valve, simply screw it on.(Contains 2 adapters B, 2 plunger valves, 2 pipe holders).
Check Stock

UJEFF Halkey-Roberts (HR) Air Valve Adapter H-R Hose Adapter Paddle Board Air Pump Adapter HR Valve Adapter for Inflatables Foot Pump Kayak Air Valve Adapter

  • H-R connector adapt inflatable boat foot pump or electric pump hoses to fit Halkey-Roberts valve. Ideal for use with electric pumps, hand pump or foot pump. It's easy to inflate and to deflate..
  • The pump hose valve adapter is made of Eco-friendly solid thick plastic, With high flexibility and high strength, Replaceable and useful. Great replacement accessories for various kayaking. Switch the part washer with your dinghy/pontoon/SUP/board/kayak/boat/pontoon valve cap washer for an air tight fit..
  • It's 3/4 inch in diameter on the valve side and 13/16 inch diameter on the hose side. End to end length= 1 15/16", Hose End Diameter= 13/16", Halkey-Roberts End Diameter= 13/16"..
  • Fits H3 valves for connection to electric pump compressors, Fits Naru valves on Wahoo and Wakooda iSUP. For use the H3 or Halkey Roberts Valves..
  • In order to use a regular electrical mattress inflator on inflatable paddleboard , ten toes board, inflatable water trampoline, inflatable giant slide, inflatable gymnastic mat, air track..
Check Stock

AC Recharge Kit Hose with Gauge 3 Pack Bullet Piercing Tap Valves R12 to R134a Conversion Kit for Refrigerator HVAC Tools

  • UNIVERSAL AC RECHARGE HOSE WITH GAUGE - One end with a valve connects to the can with 1/2 trapezoidal thread, and the other end connects to the car's....
  • QUALITY MATERIAL & DURABLE - The hose is made of quality rubber with high-pressure resistance. The copper valve is durable to use..
  • USER-FRIENDLY – The 90-Degree push and lock coupler features an auto shut-off function. The built-in safety valve to prevent accidental venting of....
  • UNIVERSAL CONVERSION VALVE – Comes with a conversion valve which is used to convert from R-12 to R-134A air conditioning system. Can be screwed on....
  • COMPLETE KIT - Package Includes: 3 x Bullet Piercing Tap Valves.
Check Stock

Futurama Volume Four

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and....
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical....
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The....
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25....
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure....
Check Stock

Oupeng sky Brass Garden Hose Shut Off Valve,Heavy Duty Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty 3/4 Inch Solid Brass Garden Hose Shut Off Valve with 4 Extra Rubber Washers.

  • Easy to use & extensive： Swivel connection, perfect for garden nozzle, sprayers, watering tools, accurate attachment to faucet or spigot.It’s perfect for garden hoses and power washer, RV, boat or anywhere there’s a standard 3/4″ garden hose connection..
  • Brass Garden Hose Shut Off Valve： 3/4 in Solid Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty Water Hose Turn Off Ball Valve Adapter Fittings with 4 Extra Hose Pressure Washers.The hose washers are made of soft, resilient rubber for a water-tight seal. Made to resist hardening and cracking..
  • Heavy Duty brass one way valve,Well made, zero leaks. If you have any questions about these products, please contact us and we will help you solve them as soon as possible..
  • Garden Hose Valve：Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage.You can use these to attach to end of hose then you could swap out heads without turning water off at the hose bib.A great addition to the end of your hose. Makes it easy to change fittings without having to go all the way back to the other end..
Check Stock

Inflatable Boat Foot Pump Halkey-Roberts HR Hose Adapter H-R Valve Adapter

  • It's 3/4 inch in diameter on the valve side and 13/16 inch diameter on the hose side.
  • End to end length = 1 15/16" Hose End Diameter= 13/16" Halkey-Roberts End Diameter= 13/16".
  • Fits H3 valves for connection to electric pump compressors, Fits Naru valves on Wahoo and Wakooda iSUP..
  • For use with all Aquaglide products that use the H3 or Halkey Roberts Valves(kayaks & platinum items such as trampolines and bouncers), rubber boats, inflatable boats, inflatable kayaks, canoe, SUP, Paddle Board Pump Adapter, river rafts, fishing boats, drift boats, dinghy and so on..
  • H-R connector adapt inflatable boat foot pump or electric pump hoses to fit Halkey-Roberts valve..
Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

  • This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
  • Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
  • Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
  • The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
  • The valve spool has annular grooves to help center the valve in the bore..
Check Stock

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

  • BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
  • R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
  • BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
  • The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
  • Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 For Frigidaire Refrigerator New

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319.
  • Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve,This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to. This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built in.
  • Included: (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws.
Check Stock