Reviews End Feed Capillary Fitting

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

Accusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

Refrigerator Cold Control, 34 to 55 Range

  • Price For: Each Capillary Type: Capillary w/Bulb Sensor Switch Type: Close On Rise Height (In.): 2-1/2 Type: Medium Temp. Width (In.): 1-1/8 Full Load Amps: 16 Depth (In.): 1-1/8 Locked Rotor Amps: 80 Switch Action: SPST Application: Designed for Temperature Cold Control Cold Off: 35 Item: Refrigeration Control Includes: Faceplate and Mounting Hardware.
  • Control Range (F): 34 to 55 Capillary Length (In.): 47-1/4 Warm On: 54.5 Voltage: 120/240 Normally On (F): 41 Country of Origin (subject to change): China.
Check Stock

Testor Corp 3527C Non-Toxic Cement w/Applicator 1oz

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure....
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and....
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry....
Check Stock

uxcell 304 Stainless Steel Capillary Tube Tubing 7mm ID 8mm OD 300mm Length 0.5mm Wall

  • Capillary Tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes..
  • Exceedingly demanded in precise apparatus or instruments,automatic instruments,eletronic parts,oil or gas plants and other industries..
  • Stainless Steel Tube is a good choice for most applications due to greater corrosion resistance and precision..
  • Alloy 304 stainless steel is one of the most common stainless steel and it is having nickel and chromium alloy metal as non-iron constituents..
  • Please check the correct size before purchasing..
Check Stock

uxcell 304 Stainless Steel Capillary Tube Tubing 5.65mm ID 6.35mm OD 300mm Length 0.35mm Wall

  • Capillary Tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes..
  • Exceedingly demanded in precise apparatus or instruments,automatic instruments,eletronic parts,oil or gas plants and other industries..
  • Stainless Steel Tube is a good choice for most applications due to greater corrosion resistance and precision..
  • Alloy 304 stainless steel is one of the most common stainless steel and it is having nickel and chromium alloy metal as non-iron constituents..
  • Please check the correct size before purchasing..
Check Stock

Patio Misting Kit - Pre- Assembled Misting System - Simply unpack and Attach - Cools temperatures by up to 30 Degrees - for Patio, Pool and Play Areas (36 Feet - 8 Nozzles)

  • UV resistant flexible ¼’’ tubing Ultra fine Brass/Stainless Steel Misting Nozzles (More durable than cheap plastic nozzles) Leak proof compression nozzle fittings End Plug fitting - (Pre-installed every 3 feet) Adjustable spray direction.
  • Attaches to any garden hose or spigot Operates on city water pressure 40-100PSI Includes mounting clamps Completely pre-assembled and easy to install (Simply unpack and attach!).
  • [Specifications] - 8 Nozzles, 36 Feet, Includes 15 Ft Feed Line, with Garden Hose Connector for easy Installation to Garden Hose.
  • {Made in USA} - Applications include: Patio Misting, Greenhouse, Drip Irrigation.
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock