Reviews Encoder Motors

DC 5V 12V 18V 24V 5A 150W PWM Motor Speed Controller, Mini Speed Control Switch, Speed Regulator with Stepless Variable Rotary Knob - for Electric Motor, Brush Motor, Car, Generator, Fan (DC 5-30V)

  • Wide voltage range - DC 5-30V PWM motor speed controller switch, rated output current 5A, maximum output current 15A, max power 150W.
  • Settable duty cycle, duty cycle upper and lower limits and working frequency - set up these 3 parameters according your own motors.
  • comes with start and stop button and can be controlled by external switch.
  • High percision digital encoder knob - can adjust the motor speed , more accurate and consistent than ordinary potentiometer, easy to match the value.
  • Soft-start protection - the current increases slowly when starting the motor, avoid the high shock current, effectively protect the motor and extend its service life.
  • Widely applications - good to control the output of power, brightness, speed.
  • perfect for DC drive motor, generator, LED lights, light bulbs, lamp, car, fan, micro-pumps, solenoid valves, micro-pumps, solenoid valves.
  • (Note: This product can only be used for DC brushed motors, not for brushless motors).
Check Stock

PEMENOL Motor Speed Controller PWM DC 5V 12V 24V 150W Adjustable Speed Regulator with Stepless Variable Rotary Switch PWM Signal Generator Driver Module

  • ★Digital Rotary Encoder Button: The rotary encoder adopts the principle of digital pulse, the output will be as much as you rotate it, and the same value will be input when you rotate it next time. Good repeatability, high precision, can be quickly adjusted to the value you want.
  • ★Soft-start Protection: The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.
  • ★Duty Cycle, Duty Cycle Upper and Lower Limits and Working Frequency Can Be Set: The 3 digits LED motor speed regulator can adjust the duty cycle, the upper and lower duty cycle limits and the operating frequency. Convenient for customers to use according to the working characteristics of their own motors. The adjustable electronic speed controller can automatically save the set parameters to prevent data loss after a power failure.
  • ★With the Start and Stop Button: The PWM DC motor governor with start and stop button, and can be controlled by an external switch, meet your multiple control needs. Maximum power: 150W. Working voltage: DC5V~30V, input with anti-reverse connection protection.
Check Stock

4in Mecanum Wheel Aluminum Right Wheel,45 Degree Omnidirectional Wheel Robot Drive Wheel Industrial Robot Parts, Single Wheel Load 30KG

  • Complete accessories, easy to install and connect.
  • With various motors, encoder and sensor ports, and convenient connectors, it is possible to write programs to control the behavior of the robot.
  • Compatible with many compilers, easy to operate.
  • The product is a powerful and easy-to-use learning tool.
  • The data cable can make sure the stability of connecting.
Check Stock

2 Sets of Zinc Alloy Bevel Gears + 22mm Aluminum Bearing, 45 Degree Bevel, 8mm Inner Diameter, Industrial Robot Parts for FRC

  • With various motors, encoder and sensor ports, and convenient connectors, it is possible to write programs to control the behavior of the robot.
  • The data cable can make sure the stability of connecting.
  • Complete accessories, easy to install and connect.
  • The product is a powerful and easy-to-use learning tool.
  • Compatible with many compilers, easy to operate.
Check Stock

DC 0-10V 0/4-20mA Current Voltage Signal Generator, Built-in Battery Power Supply Interface Analog Simulator, Adjustable 4-Digit Display, for PLC, Panel Debugging, Device Testing

  • 【2-in-1 Voltage & Current Generator】--- Voltage Output: -10V~+10V, precision is 0.01V, current output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output voltage and current, switchable and adjustable, can be calibrated. Encoder knob rotate one circle has 20 pulses..
  • 【Multiple 4-Digit Display】--- With 4 different types of digit display, two decimal points, you can press "Mode" button to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display..
  • 【Different Power Supply Modes】--- With 1000mAh 3.7V built-in rechargeable battery embedded inside (charged via micro USB port), it can be powered via various ways, micro USB-5V, external power DC 15-30V, each can make the signal generator to work..
  • 【Safe to Use】--- Output range: passive or active 0-22mA, -10~+10V, voltage output can be exactly 0.00V.
  • output range and precision are programmable and adjustable. Output is with short circuit protection, power supply with reverse connection protection, which is safe for you to use. User can set 9 x fast signal output points, more convenient to do debugging..
  • 【Wide Application】--- It can be used for PLC and panel debugging, device testing, frequency converte....
Check Stock

100mm Robot Wheel Metal with Neoprene Tire Industrial Robot Parts 8mm Hole Inner Diameter Metal Robot Car Wheel Hub DIY Industrial Robot Parts Accessories

  • The product is a powerful and easy-to-use learning tool.
  • Compatible with many compilers, easy to operate.
  • Complete accessories, easy to install and connect.
  • The data cable can make sure the stability of connecting.
  • With various motors, encoder and sensor ports, and convenient connectors, it is possible to write programs to control the behavior of the robot.
Check Stock

Fielect 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 5 Pins 20mm Shaft 5Pcs

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 5pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Fielect 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 10mm Shaft 5Pcs

  • [Specification]- Type: EC11 Encoder without Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 2pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Fielect 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 10mm Shaft 2Pcs

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 2pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock