Reviews Elegoo Mars 3 Dlp

ELEGOO Mars 3 Resin 3D Printer and ELEGOO Mercury X Bundle Curing and Washing Station

  • ELEGOO Resin 3D Printer, Mars 3 MSLA 3D Printer with 6.6 inches Ultra 4K Monochrome LCD and Ultra-high Printing Accuracy, Print Size....
  • ELEGOO Mercury X Bundle with Separate Washing Station and Curing Station for Large Resin 3D Prints, Compatible with ELEGOO Saturn, Mars MSLA 3D....
Check Stock

ELEGOO Mars 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power, Printing Size of 132.8x74.7x150mm³/5.22x2.94x5.9in³

  • [ ] ELEGOO MARS 4 DLP 3D printer adopts TI (Texas Instruments) DLP technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. Tempered glass replaces traditional LCD screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference..
  • [+ ] The service life of the DLP projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen..
  • [ & - ] 12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB..
  • [ ] The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the pri....
Check Stock

ELEGOO 3 PCS PFA Release Liner Film 146 * 195 mm for ELEGOO Mars Series Resin 3D Printer

  • 【Excellent Quality】 The performance of PFA film is better than that of FEP1.0. It has excellent high temperature resistance and wear resistance..
  • 【Transmittance】 The light tranamittance is 95%, which ensures the high stability of UV light..
  • 【Compatibility】Sutiable for all 8.9 inch SLA 3D Printers. Such as ELEGOO Mars 3/ELEGOO Mars 3 Pro..
  • 【Installation】Comes with concise installation instructions so that you can replace the PFA membrane correctly..
Check Stock

ELEGOO Mercury Plus 2 in 1 3D Printing Washing and Curing Machine V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

  • ...ate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket..
  • 【Ideal Compatibility】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints..
  • 【Special Notes】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water..
Check Stock

ELEGOO Mini Purifier with Activated Carbon Filter and Universal Adaptor for LCD,DLP,MSLA Resin 3D Printer（Pack of 2)

  • Odor Control: Activated carbon can absorb and filter the irritant resin odor before they are ventilated throughout the cooling fan at a super adsorption rate, which gives you fresh and safe user experience..
  • Replaceable Carbon Filter: It comes with one activated carbon block which can be used for 3 to 6 months. The carbon can be replaced and need to be purchased separately..
  • Long Endurance：With the 2000mAh battery, it can work continuously for at least 24H once fully charged via the power adapter included..
  • Wide application：Not only for ELEGOO Mars Printer, it also can be used for LCD, DLP, MSLA Resin 3D Printer.
  • Well-Protected Package: Well-designed and sturdy box stuffed with all the parts, keeping it from damage during transportation..
Check Stock

ELEGOO Resin 3D Printer, Mars 3 MSLA 3D Printer with 6.66 inches Ultra 4K Monochrome LCD and Ultra-high Printing Accuracy, Print Size 143×89×175mm³/5.62×3.5×6.8in³

  • 【Higher resolution and output】Mars 3 is ELEGOO’s first desktop mSLA 3D printer with super-high precision. It adopts a 6.66 inches mono LCD with Ultra 4K HD resolution, which has a 30% higher XY resolution at 35μm and 37% higher build volume than Mars 2, delivering amazing 3D prints..
  • 【The release film 2.0】With less release tension, the small and thin supports added to your model will be well-protected. Mars 3 has a greatly improved success rate when printing 3D models with lots of details..
  • 【Upgraded light source】 36 highly integrated LED lights with a brand new COB lens that has a free-form surface can deliver over 90% uniformity of UV light illumination , making the printing accuracy upgraded to another level..
  • 【Optimized heat sink unit】ELEGOO Mars 3 adopts copper tubes in the heat sink unit working with a high-quality cooling fan, which significantly improves the heat dissipation performance and brings down the light decay to less than 5% after 6000hours printing, extending the longevity of the UV LED lights..
  • 【Chitubox Pro free trial】Mars 3 comes with a 1-year free trial of Chitubox Por slicer that worths 169USD. Chitubox Pro has loads of great upgrades from automatic supports to model repair tools, which helps both professiona....
Check Stock

ELEGOO Mars 2 Pro 3D Printer 2K Mono MSLA UV Photocuring Resin LCD 3D Printer Front USB Input 2K Monochrome LCD 5.1x3.1x6.3inch Printing Size

  • Save Time and Money: 2K Mono QHD Resolution LCD Screen has 3X faster printing than RGB LCD screen, single-layer exposure only takes 1-2 seconds. Mono....
  • Ultra Printing Accuracy: Upgraded light source design offer uniform and bright light emission, ensuring uniform print quality across the entire build....
  • Safe and Durable Machine : ELEGOO Mars 2 Pro 3D printer has built-in activated carbon filter can absorb and eliminate odor, so there is no need to....
  • Convenient and Easy to Use: ELEGOO Mars 2 comes with the latest version of CHITUBOX Slicing Software. It takes only 1 minute to slice 30Mb .stl format....
  • ELEGOO OFFICIAL SERVICES: We provide a 1-year warranty on the printer and 6-months warranty for the 2K LCD. Mars 2 Pro comes with 2 extra FEP films..
Check Stock

ELEGOO Mars 2 Pro 3D Printer MSLA UV Resin 3D Printer with 6.08 inch 2K Mono LCD Speedy Printing and High Precision 5.1x3.1x6.3 inch Build Volume

  • ELEGOO Authorized Distributor – You will receive ELEGOO Mars 2 Pro set, 1-year warranty on the whole printer for quality problems, 6-month warranty....
  • Speedy Mono-LCD Printing – Equipped with 6.08 inches monochrome LCD of 2K HD resolution, ELEGOO Mars 2 Pro exposure time is as fast as 2 seconds per....
  • Sharp and Precise Details – Upgraded light source design provides more uniform UV distribution, combined with 2K mono LCD, making a higher level of....
  • Friendly Printing Experience –Build-in activated carbon reducing bad odor of resin, UV-blocking transparent top cover, simply multi-language....
  • Build to Last Longer – Main body of Mars 2 Pro is made of CNC machined aluminum, durable and solid. The Monochrome LCD screen excels RGB....
Check Stock

3D Printer Castable Resin Jewelry Liquid Casting/Wax Resin for LCD 3D Printer 1000 ml Casting Resin for All Different LCD 3D Printer

  • ✅ Jewelry Sample Observation: Ultra precision & high-strength ensure models' detail clearly display, delicate and perfect. It suitable for....
  • ✅ Lowest Shrinkage: Lower shrinkage and great stability significantly reduce printing time with its excellent fluidity, work excellent, which makes....
  • ✅ Practical Material: Jewelry model printed by NOVA3D Wax Resin can directly act as pressure rubber model, thus you can get empty jewelry shape by....
  • ✅ Better Adaptability: NOVA3D 405nm wax resin adapt to most LCD, DLP 3D printers, such as NOVA3D Elfin, Bene4, GEM, Anycubic photon, Elegoo Mars and....
  • ✅ Quality Guarantee: We pride ourselves on providing caring service, both before and aftersales. Our support will respond to all inquires within 24....
Check Stock

ELEGOO 2 PCS Metal Resin Tank for ELEGOO Mars 3D Printer with FEP Pre-Installed and 2 Lids and 2 Allen Wrench, Resin Vat for ELEGOO Mars, Mars pro, Mars 2, Mars 2 pro, Photon and Epax X1

  • Orignal resin tank used on ELEGOO MARS 3D printer and the FEP film is pre-installed.
  • Made of anodized aluminum and durable design for long term usage.
  • The extra lid is provided to keep away dust, UV light source or direct sunlight.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
  • ELEGOO resin tank kit is also compatible with Mars pro, Mars 2, Mars 2 pro, Photon, Photon S and Epax X1.
Check Stock