Reviews Electronic Brake Force Distribution ebd

TEKONSHA 90885 / Tekonsha Prodigy P2 Electronic Brake Control f/1-4 Axle Trailers - Proportional

  • Ram 1500 2500 3500 4500 5500 Electronic Integrated Trailer Brake Controller Module with Switch. Part# 82215040AC, 82215040AB, 82215040, 68105206AC, 68105206AB.
  • Replacement for 2016-2021 Dodge Ram 1500.
  • Warranty for 12 Months! Adopt high-end chips to provide fast braking with positive response, and the performance is at least 50% higher than other similar parts..
  • Integrated Trailer Brake Control Module allows driver to automatically or manually activate the electronic brakes on properly equipped trailers for greater stopping power on downhill grades. The controller and status display are mounted in the dashboard to the left of the steering wheel, and the included control lever can activate the trailer brakes independent of the truck's brakes. Drivers can customize the amount of brake force the trailer uses, depending on load requirements..
  • It is necessary to check if the vehicle has both trailer brake module connectors. These connectors are located under left side of the steering column. Both connecters are 4 pin connectors. If both connecters are not present the ITBM kit cannot be added to the vehicle..
Check Stock

Electric Wheelchair Controller Part Accessories, Joystick Controller, Professional Electric Wheel Chair Joystick Controller Electric Mobility Wheelchairs Accessory Brushed 4P Controller

  • ★Electronic differential relying on advanced driving algorithm and intelligent control, flexible operation, strong controllability, "S-curve" acceleration and deceleration, soft start instant, so that the electric wheelchair can have a comfortable and safe driving experience under any road conditions..
  • ★Close-loop control of the speed of the non-inductive brushless motor. When the brake is going uphill, the electromagnetic brake when the motor speed is 0 can be detected, which will not slide backward and prevent the wheelchair from turning backwards..
  • ★Automatically recognize whether the motor connector and the electromagnetic brake connector are connected correctly, and can distinguish between reverse connection and wrong connection between the two..
  • ★Electronic energy braking, closed-loop current during braking, uniform braking distance of short-circuit braking force, intelligent charging protection, which can identify whether the charger is connected or not, and has protected the charging con....
Check Stock

DEWALT 20V MAX* Angle Grinder Tool, Tool Only (DCG413B)

  • Brushless motor of the angle grinder requires no brush changes..
  • DEWALT grinder's brake stops wheel in 2 seconds or less on average.
  • Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off..
  • Features E-Switch Protection - When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • Two stage trigger requires two actions to activate tool..
Check Stock

DEWALT 20V MAX* XR Angle Grinder with Kickback Brake, Slide Switch, 4-1/2-Inch, Tool Only (DCG405B)

  • Brushless motor of the angle grinder requires no brush changes..
  • DEWALT grinder's brake stops wheel in 2 seconds or less on average.
  • Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off..
  • Power Loss Reset prevents accidental restarts following a power disruption when the tool is left in the "on" position..
Check Stock

SRAM Unisex's Force Etap Axs 1X D1 Electronic Road Groupset (Shifters, Rear Der and Battery, Charger and Cord, and Quick Start Guide), Black, One Size

  • Groupset includes all electronic components for a 1x setup in a single package - cable brake/shift lever pair, rear derailleur, battery, charger and cord, and Quick Start Guide.
  • The SRAM Force eTap AXS brake/shift levers connect you with your bike by providing simple and intuitive eTap shift logic, and are AXS enabled for easy personalization.
  • The Force eTap AXS rear derailleur features Orbit chain management technology to keep the drivetrain quiet and secure, and contains larger X-Sync pulleys for increased durability and efficiency.
  • To complete your groupset, purchase a crank, bottom bracket, cassette, chain, and brakes.
Check Stock

DEWALT 20V MAX* Angle Grinder Tool Kit, 4-1/2-Inch, Paddle Switch with Brake (DCG413R2)

  • Brushless motor of the angle grinder requires no brush changes..
  • DEWALT grinder's brake stops wheel in 2 seconds or less on average.
  • Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off..
  • Features E-Switch Protection - When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • Two stage trigger requires two actions to activate tool..
Check Stock

DEWALT FLEXVOLT 60V MAX Angle Grinder with Kickback Brake Kit, 4-1/2-Inch to 6-Inch (DCG418X1)

  • Angle grinder has 13-amp motor equivalent power.
  • Metal grinder features 9000 rpm no-load speed for applications with 6-inch grinder wheels.
  • Brake of DEWALT angle grinder engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2-inch x 1/4-inch bonded abrasive wheel, non-hubbed).
  • Kickback Brake engages when a pinch, stall, or bind-up event is sensed. The electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off.
  • E-CLUTCH activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
Check Stock

DEWALT FLEXVOLT 60V MAX* Angle Grinder with Kickback Brake Kit, 4-1/2-Inch to 6-Inch (DCG418X2)

  • DEWALT 7 1/4 circular saw has 13 Amp motor equivalent power.
  • The cordless circular saw has 9000 rpm no-load speed for applications with 6-inch grinder wheels.
  • Brake of the compact circular saw engages when trigger is released with a stopping speed of 1.5 seconds when using a standard grinding wheel (4-1/2-inch x 1/4-inch bonded abrasive wheel, non-hubbed).
  • Kicback Brake engages when a pinch, stall, or bind-up event is sensed. The electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off.
  • E-CLUTCH activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
  • Up to 30% more power vs the DCG414 Grinder**.
Check Stock

Wheelchair LED Command Joystick, DC 24V Waterproof Electric Power Wheelchair Controller Part LED 6 Keys Joystick for Folding Electric Wheelchair Hall Rocker Omnidirectional

  • ♿【Electronic Differential】Relying on advanced driving algorithm and intelligent control, flexible operation, strong controllability, "S-curve" acceleration and deceleration, soft start instant, so that the electric wheelchair can have a comfortable and safe driving experience under any road conditions.
  • ♿【Close-Loop Control】Close-loop control of the speed of the non-inductive brushless motor. When the brake is going uphill, the electromagnetic brake when the motor speed is 0 can be detected, which will not slide backward and prevent the wheelchair from turning backwards.
  • ♿【Protective Functions】Such as overcurrent, overvoltage, overload, overheating, undervoltage, etc., to ensure that the electric wheelchair is more reliable and safer.
  • ♿【Connect】Automatically recognize whether the motor connector and the electromagnetic brake connector are connected correctly, and can distinguish between reverse connection and wrong connection between the two. Before purchasing, please confirm whether the wiring point is compatible with your wheelchair. If you are not sure, you can send a picture to ask custo....
Check Stock

DEWALT Angle Grinder, RAT Tail, 7-Inch, 13-Amp (DWE43840CN)

  • Brushless motor of the angle grinder requires no brush changes.
  • Brake stops wheel in 4 seconds or less on average using DW8826 wheel.
  • The electronic Kickback Brake of DEWALT angle grinder engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut off the motor.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • 2-stage trigger requires two actions to activate tool.
Check Stock