Reviews Electronic Ballasts For Fluorescent

Dual-Lite UFO-4W Approved Fluorescent Lighting Emergency Ballast Battery Pack

  • The product type is Battery Pack - Fluorescent, Lamp Type: Fluorescent, Lumen Range: 500-600 lm, N/A, Battery Type: Nickel Cadmium (maintenance free), Compatible with electronic, standard magnetic, energy saving, dimming and end-of-lamp-life AC ballasts, Temperature Range: 0˚C to 50˚C, Damp Location, Black, 120/277 VAC.
Check Stock

GE UltraMax Proline Electronic Ballast 120/277 Volt Instant Start Ballast Normal Ballast Factor Ballast for Fluorescent Light 4 or 3 Lamp T8

  • ELECTRONIC BALLASTS FOR EFFICIENCY AND SAVINGS: the patented instant-start electronic ballasts transform the power of light into efficiency and....
  • BALLASTS FOR LONG BURN APPLICATIONS: UltraMax Instant-Start Electronic Ballasts are intended for long burn cycle applications, and offer a lower cost....
  • MULTIVOLT ELECTRONIC BALLAST: This T8 ballast handles voltage from 120 to 277 Volts..
  • REDUCE GREENHOUSE GAS EMISSIONS WITH GE BALLASTS: These ballasts are among the highest energy-efficient ballasts available and contribute to....
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps, as well as four-lamp or three-lamp orientation..
Check Stock

GE UltraMax Proline Electronic Ballast 120/277 Volt Instant Start Ballast High Power Ballast Factor Ballast for Fluorescent Light 2 or 1 Lamp T8

  • ELECTRONIC BALLASTS FOR EFFICIENCY AND SAVINGS: the patented UltraStart electronic ballasts transform the power of light into efficiency and savings....
  • BALLASTS FOR FREQUENTLY SWITCHED APPLICATIONS: UltraStart electronic ballasts deliver long life in frequently switched applications, such as those....
  • MULTIVOLT ELECTRONIC BALLAST: This T8 ballast handles voltage from 120 to 277 Volts..
  • REDUCE GREENHOUSE GAS EMISSIONS WITH GE BALLASTS: These ballasts are among the highest energy-efficient ballasts available and contribute to....
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps, as well as two-lamp or one-lamp orientation..
Check Stock

Sunlite 88214-SU LED PLV Plug and Play Light Bulb, 9 Watts (26W Equivalent), G24q Base, Ballast Dependent, CFL Replacement, UL Listed, 1 Count (Pack of 1), 35K-Neutral White

  • UPGRADE TO LED - Replace your 26 watt compact fluorescent PL bulbs with energy efficient 9 watt LED plug and play bulbs from Sunlite. They feature a 4-Pin base (G24Q) and are instant on at full brightness with no buzzing or flickering. Ideal for use in recessed lighting, lamps or any compatible fixture..
  • PLUG AND PLAY - These bulbs are direct replacements for PL fluorescent bulbs with no bypass required. For use with electronic ballasts only. See manufacturer's website for a complete list of compatible ballasts..
  • ENERGY EFFICIENT - These 9 watt LED bulbs are direct replacements for 26 watt CFL bulb. 950 Lumen output with a color temperature of 3500K (neutral white). Low annual operating costs of only $1.08. (Based on 3 Hours/Day at $0.11/kWh).
  • LONG LIFE SPAN - Provides up to 50,000 hours of energy efficient light means you'll have to replace difficult to access bulbs less often. Makes commercial and residential fixtures virtually maintenance-free..
  • A SAFER CHOICE - Unlike CFL bulbs these LED lamps contain no hazardous chemicals. They work with your existing ballasts so no special wiring or modifications are needed. They are DLC Listed for quality and efficiency..
Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Sunlite 41383-SU LED PLV Plug and Play Vertical Light Bulbs 9 Watts 26W Equivalent 1000 Lumens G24q Base 4 Pin Ballast Dependent CFL Replacement UL Listed 12 Count Pack of 1 40K-Cool White

  • UPGRADE TO LED - Replace your 26 watt compact fluorescent PL bulbs with energy efficient 9 watt LED plug and play bulbs from Sunlite. They feature a....
  • PLUG AND PLAY - These bulbs are direct replacements for PL fluorescent bulbs with no bypass required. For use with electronic ballasts only. See....
  • ENERGY EFFICIENT - These 9 watt LED bulbs are direct replacements for 26 watt CFL bulb. 1000 Lumen output with a color temperature of 4000K (cool....
  • LONG LIFE SPAN - Provides up to 50,000 hours of energy efficient light means you'll have to replace difficult to access bulbs less often. Makes....
  • A SAFER CHOICE - Unlike CFL bulbs these LED lamps contain no hazardous chemicals. They work with your existing ballasts so no special wiring or....
Check Stock

TOPGREENER Occupancy Vacancy PIR Motion Sensor with 0-10V Dimmer Light Switch, 800W Electronic Ballast or LED Driver, Single Pole Low-Voltage Dimmer, TDODS5-010, White

  • Motion sensor switch with low voltage 0-10 dimming, designed to control electronic ballasts or dimmable LED drivers, it allows you to dim the brightness levels of low voltage lighting.
  • Motion detection: Passive infrared (PIR) sensor reduces false triggers from unwanted movements and turns lights on when motion is detected. Lights will automatically turn off when the selected time delay expires.
  • Dimmer gradually brightens and fades lights by holding the top or bottom buttons.
  • lights turn on to last used brightness level.
  • Adjustable: Variable time delay from 15 sec (Test) to 30 min, detection range, ambient light level.
  • Specifications: For use with dimmable electronic fluorescent ballasts or dimmable LED drivers ONLY, neutral wire required, 120-277VAC, 800W max, 1200 sq ft coverage area, single-pole, wall plate not included, UL listed.
Check Stock

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Philips LED Instantfit 4-Foot T8 Tube Light Bulb, 1800-Lumen, Cool White (4000K), 16W=32W, Medium Bi-Pin G13 Base, 10-Pack

  • COOL WHITE: Philips LED Instant Fit 4-Foot T8 Tube Light Bulbs offer cool and crisp lighting with high CRI (color rendering index). At 4000 Kelvin these bulbs deliver bright, crisp color ideal..
  • BALLAST KNOWLEDGE REQUIRED: Philips LED 4 Foot T8 Tube Lights Bulbs with InstantFit are the fast and easy way to replace your electronic ballast compatible old fluorescent tubes with efficient LED light. REQUIRES ELECTRONIC BALLAST..
  • ENERGY EFFICIENT: Philips LED Instant Fit 4-Foot T8 Tube Light Bulbs have an estimated annual energy cost of Dollar 1. 93. Philips LED light bulbs are Mercury free and UL Certified..
  • LONG LASTING: These Philips LED bulbs last 10x longer than fluorescent bulbs. Each light bulb is expected to deliver a lifetime of up to 36, 000 hours (based on three hours per day), saving you the cost of frequent bulb replacement..
  • COMPATIBILITY: These Philips LED light bulbs fit in G13 Medium Bi Pin Bases in electronic ballasts.
  • Not compatible with Philips HUE products.
  • Philips LED Instant Fit 4 Foot T8 Tube Light Bulbs are for non connected use only..
Check Stock

GE UltraStart Proline Electronic Ballast 120/277 Volt Program/Rapid Start Ballast Normal Ballast Factor Ballast for Fluorescent Light 1 or 2 Lamp T12

  • REPLACeMENT FOR MAGNETIC ELECTRONIC BALLASTS: These high-performance ballasts are designed for replacement of magnetic T12 ballasts during maintenance....
  • BALLASTS FOR ENERGY SAVINGS AND EFFICIENCY: GE MVP T12 ballasts have the same wiring and mounting requirements as standard magnetic ballasts and....
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps, as well as two-lamp or one-lamp orientation..
  • MULTIVOLT ELECTRONIC BALLAST: This T12 ballast handles voltage from 120 to 277 Volts..
  • LIGHTWEIGHT AND LOW-PROFILE BALLAST: Low-profile and lightweight housing simplifies installation, increases portability, and reduces transportation....
Check Stock