Reviews Electrical Resistivity Survey

MG Chemicals 8331D Silver Conductive Epoxy Adhesive, High Conductivity, 20 min Working time, 2-Part, 14 Gram Kit

  • Creates strong permanent electrical connections.
  • Electrical resistivity: 1.8 x 10-3 Ω·cm, Thermal conductivity: 1.5 W/(m·K)..
  • Use as a solder replacement or for bonding heat-sensitive electronic components. Cures at room temperature but heat cure is recommended to get the best possible conductivity.
  • Excellent adhesion to many substrates such as glass, soft metals and plastics.
Check Stock

MG Chemicals 8463A-3ML Silver Conductive Grease, Maximum Thermal Conductivity, 5.5 g Dispenser, Greyish Yellow

  • Improves electrical connections between irregular surfaces..
Check Stock

TSI Supercool 24940 Hybrid A/C Compressor Oil - 8 oz.

  • Synthetic lubricant specially formulated for electric hybrid air conditioning compressors.
  • High dielectric protection formula has excellent resistivity to potential electrical current leakage in high voltage hybrid A/C systems.
  • Proprietary formula contains conditioners, inhibitors and anti-wear agents.
  • Provides excellent lubricity and compressor protection.
  • Supercool offers one of the most complete A/C maintenance programs in the marketplace.
Check Stock

3M 69 Glass Cloth Electrical Tape - 2 in x 108 ft Flame Retardant Silicone Adhesive Tape Roll Insulation Tape

  • Flame Retardant Tape: electrical insulating tape meets UL 510 flame retardancy requirements and can sustain up to 200C high temperature. This tape....
  • Insulation Tape: flame resistant woven glass cloth tape features high-temperature thermosetting silicone adhesive and is useful for insulating and....
  • Resistivity: silicone adhesive tape offers high resistance from abrasion, shrinking, edge-tear, rotting and burning. The solvent, corrosion resistant....
  • Applications: glass cloth electrical tape is designed for splicing silicone-covered glass wire. Edge and tear-resistant tape works efficiently in....
  • Specifications: the 0.007 in. electric tape roll measures 2 in. in width and is 108 ft. in length.
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

PZRT High Temperature K-Type Thermocouple Sensor Thermocouple Terminal Block Ceramics Terminal Block High Temp Porcelain Ceramic Connectors

  • Material: Made of high quality ceramic material, durable and long service life..
  • Accepts AWG 8 (3.3 mm) Type K thermocouples..
  • With high mechanical, high strength, high volume resistivity, good electrical insulation properties..
  • Unglazed ceramic thermocouple connector block for high temperature K-type thermocouples..
  • Package includes: 1 x Thermocouple Terminal Block..
Check Stock

Sibe-R-Plastics Supply 0.236 1/4 6mm Thick Light Grey/Smoke Transparent Acrylic Plexiglass Sheet #2064 [Pick Your Size] 6 x 12

  • Outstanding resistance to long-term exposure to sunlight and weathering..
  • The linear dimensions of our sheets are nominal and they have a tolerance of +-1/8" in each direction (length and width). Therefore the dimensions you....
Check Stock

Sibe-R-Plastics Supply 0.118 1/8 3mm Thick Light Grey/Smoke Transparent Acrylic Plexiglass Sheet #2064 [Pick Your Size] 6 x 18

  • Outstanding resistance to long-term exposure to sunlight and weathering..
  • The linear dimensions of our sheets are nominal and they have a tolerance of +-1/8" in each direction (length and width). Therefore the dimensions you....
Check Stock

MG Chemicals 8330S Silver Epoxy Adhesive, Extreme Conductivity, 4 hr. Working time, 21 g, 2 Dispeners (8330S-21G)

  • Excellent 0.0007 Ω·cm electrical resistivity and 2.4 W/(m·K) thermal conductivity.
  • Easy 1:1 mix ratio and long working time may be mixed once and then used as a 1-part epoxy for a four hour production shift.
  • Heat Cure is Required. Cure temperature of only 65 °C for 2 hours —lower than most 1-part epoxies and suitable for use on heat sensitive components..
  • Very long shelf life of at least two years even when stored at room temperature.
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons.
Check Stock

Floor Plan Creator

  • Projects can have multiple floors with rooms of any shape (straight walls only)..
  • Automatic calculation of room, walls and level area.
  • Symbol library: doors, windows, furniture, electrical, fire survey..
  • User defined dimension lines to show and modify distances and sizes..
  • Cloud synchronization to automatically backup and share plans between devices (purchased, 3 days free trial)..
  • Export as image, PDF with print to scale, DXF, SVG (purchased)..
Check Stock