Reviews Electric Motor Bearings

Yimukaka 750W(1HP) blower, commercial inflatable bounce blower, ideal for inflatable bounce houses, bouncy castles （UL certification）

  • ❤️【Compact & Portable】- This air blower with a handle on the top is easy and convenient to transport or carry.
  • The small size of this electric blower will take less space on your room, which is portable operation by one person independently..
  • ❤️【Wide Usage】- With 110V—120V/60Hz, strong and efficient 750 watts motor, 4.39inch(outside) air outlet diameter, quickly filling and greatly air flowing, this air blower fan works well with outdoor bounce houses, water slides, obstacle courses, air sofas and other suitable inflatable bouncers..
  • ❤️【Easy Operation】- This air blower is ergonomic and anti-slip. The inflation rate is up to 3300R/mir. This air blower pump has 79 inch length power cord, easy-handhold grip design, which make it convenient to inflate products and be a time saver for any occasion..
  • ❤️[Safety protection design] The switch cover of the electric blower has a transparent cover, which can be opened and closed safely to prevent moisture. There are two protection nets on the two vents, which can protect our hands from being cut while working. Our portable blowers use special built-in bearings that are superior to other plastic bearings. The blower pump engine runs more smoothly..
  • ❤️【Silent Material & Design】 Ou....
Check Stock

Yardwe Hammock Chair Spring Heavy Duty Porch Swing Spring for Porch Swings and Hanging Chairs 2PCS (6.7mm)

  • 【Compact & Portable】- This air blower with a handle on the top is easy and convenient to transport or carry.
  • The small size of this electric blower will take less space on your room, which is portable operation by one person independently..
  • 【Wide Usage】- With 115V/60Hz, strong and efficient 450 watts motor, 4.4in(outside) air outlet diameter, quickly filling and greatly air flowing, this air blower fan works well with outdoor bounce houses, water slides, obstacle courses, air sofas and other suitable inflatable bouncers..
  • 【Easy Operation】- This air blower is ergonomic and anti-slip. The inflation rate is up to 3200（r/mir）flow. This air blower pump has 2.15feet length power cord, easy-handhold grip design, which make it convenient to inflate products and be a time saver for any occasion..
  • 【Safety Protection Design】 The switch cover of the electric blower has a transparent cover that can be safely opened and closed to prevent moisture.There are two wire mesh on the two vents to protect our hands from being cut while working.Our portable blower use special built-in bearings that are superior to other plastic bearings.The blower pump engine runs more smoothly..
  • 【Silent Material & Design】 Our commercial fan pumps use high quality metal....
Check Stock

RER14486 - Redcat Volcano EPX Pro - No Battery No Charger - Copper

  • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum body oil filled shocks, front and rear gear differentials, Bearings Throughout..
  • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle..
  • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout..
  • 3300KV RC540 Brushless Electric Motor, Waterproof 60A ESC, Waterproof high torque steering servo, 2.4GHz radio system..
  • Assembled & Ready to Run - Requires 7.4V 3500mAh 15C LiPO Battery & LiPO Charger - Requires 4-AA Batteries for Transmitter..
Check Stock

RER14485 - Redcat Volcano EPX Pro - No Battery No Charger - Blue

  • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum body oil filled shocks, front and rear gear differentials, Bearings Throughout..
  • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle..
  • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout..
  • 3300KV RC540 Brushless Electric Motor, Waterproof 60A ESC, Waterproof high torque steering servo, 2.4GHz radio system..
  • Assembled & Ready to Run - Requires 7.4V 3500mAh 15C LiPO Battery & LiPO Charger - Requires 4-AA Batteries for Transmitter..
Check Stock

MYOYAY Concrete Vibrator Motor 280W Electric Concrete Vibrating Shaker Table Vibrator Motor Heavy Duty Machine 110V 60HZ 2840RPM 300KGF

  • ✔【Working Datas】Rotary speed: 2840RPM. Vibration force: 300kgf. Voltage: 110V. Frequency: 60HZ. Motor power: 280W. Current: 3.8A. Popular to the densely vibrating engineering of modern structure.
  • ✔【High Quality Bearings & Full Copper Coil】Constructed with high qulity bearings and full copper coil, our electric concrete vibrator motor has the features of low noise, smooth operation, endurance, wear resistancelong service life.
  • ✔【Durable Power Cable】The power cable of the concrete vibrator for concrete vibrating table is made of four-core rubber cable power cord, which is durable and practical, high-strength bending and not easy to break.
  • ✔【Anti-oxidation and Anti-rust】The internal type concrete vibrator comes with thick terminal, anti-oxidation and anti-rust coating connecting piece, fixed casting junction box, waterproof, insulated and good performance.
  • ✔【Application】The table flat plate vibrating motor can be used to the surface of concrete base or prefabricated components. It is also suitable to work as the source of vibration. Widely used for mining, metallurgy, coal, electricity, construction, chemicals, food machinery.
Check Stock

LEM Products W780A Stainless Steel Big Bite Electric #12-Meat Grinder (.75-HP)

  • Induction motor with a start and run capacitor (9 amps).
  • Permanently lubricated, 110V motor (60HZ).
  • Dimensions (fully assembled): 9" W x 19.5" L x 16" H.
  • Dimensions (motor only): 7.5" W x 15.5" L x 13" H.
  • Hole in head where pan is inserted is 2”.
  • Stainless steel head, auger and meat pan.
  • Includes: 1 meat stomper, 1 stainless steel knife, 1 stainless steel stuffing plate, 2 stainless steel plates (Coarse, Fine), 3 stuffing tubes.
Check Stock

LEM Products W782A Stainless Steel Big Bite Electric #32-Meat Grinder (1.5-HP)

  • Induction motor with a start and run capacitor (13 amps).
  • Permanently lubricated, 110V motor (60HZ).
  • Dimensions (fully assembled): 12" W x 24" L x 19" H.
  • Dimensions (motor only): 9.25" W x 24.5" L x 14.5" H.
  • Hole in head where pan is inserted is 2-1/4”.
  • Stainless steel head, auger and meat pan.
  • Includes: 1 meat stomper, 1 stainless steel knife, 1 stainless steel stuffing plate, 2 stainless steel plates (Coarse, Fine), 3 stuffing tubes.
Check Stock

VEVOR Air Compressor Electric Motor, 5 HP SPL 3450 RPM, 208-230 Volt 3.1 KW Single Phase, 56 Frame 5/8" Keyed Shaft 60 Hz, Commercial-Duty CCW Rotation, 1.88" Shaft Length NEMA for Air Compressors

  • Single Phase Induction Motor: This compact powerful electric motor runs at 5 HP SPL 3450 RPM max speed. Frame type: 56. Input power: 3.1 kW. Full Load Amp: 15 - 16 A. Voltage: 208-230 V 60 Hz. Rotation: Non-reversible CCW. Shaft length: 1.88 in / 4.8 cm. Shaft diameter: 5/8 in / 1.59 cm keyed. Phase: Single phase. Service factor: 1.15..
  • Steel Housing: The motor shell is made of steel. The robust and reliable body can guard the internal circuit well against overheating. The attached steel bracket also offers excellent stability. Two capacitors and high-quality ball bearings ensure long service life..
  • Overload Thermal Protector: The heavy-duty electric motor adopts a manual reset knob against high-temperature overload. Reduced starting amperage design ensures the reduced voltage starting at a rated load. Insulation class-F, ENC-IP23, Ambient temperature-104℉ / 40℃, Duty-CONT, Pole-2..
  • Heat Dissipation Holes: The air compressor motor has multiple heat dissipation strips for heat dissipation. It can also guard chips and objects against dropping in the motor and causing accidents..
Check Stock

Cutex Silicone Sewing Thread Lubricant 28 Oz Bottle

  • Labelle #108 fine motor oil for “Z” / “N” / and small “HO” locos.
  • –Other uses: Tiny Fractional Horsepower motors, tiny bearings, sewing machines, smaller Fishing Reel mechanisms, drawer slides door and window locks, precision instruments, and small Clock & watch mechanisms..
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock