Reviews Electric Fuel Injection Pump

AAP Set of 8 New Genuine Fuel Injectors for 03-05 Jaguar S-Type 4.2L V8#2W93-AA

  • This fuel injector can quickly stop fuel supply so as to prevent resource lost, for example to prevent diesel from dipping..
  • Structural design of this diesel injection pump is reasonable, giving it excellent performance..
  • The structural design of this diesel injection pump is reasonable, giving it excellent performance..
  • Through professional design, this fuel injection pump is suitable for 170F diesel tractor/micro tiller..
  • Sophisticated workmanship makes this fuel injection pump a perfect substitute for worn or damaged fuel injection pumps..
Check Stock

Holley Blue Electric Pump W/O Regulator

  • ...ore tolerant of contaminated fuels | Weighs only 3 lbs | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free Flow LPH: 416 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8" NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8" NPT | Product Type: Fuel Pump | Pump Body Color: Silver.
Check Stock

AAP Set of 8 OEM 42LB 450CC Delphi Fuel Injectors for 99-07 Chevy GMC Cadillac 4.8L 5.3L 6.0L

  • Structural design of this diesel injection pump is reasonable, giving it excellent performance..
  • The structural design of this diesel injection pump is reasonable, giving it excellent performance..
  • This fuel injector can quickly stop fuel supply so as to prevent resource lost, for example to prevent diesel from dipping..
  • Through professional design, this fuel injection pump is suitable for 170F diesel tractor/micro tiller..
  • Sophisticated workmanship makes this fuel injection pump a perfect substitute for worn or damaged fuel injection pumps..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

Fuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion

  • Simple fuel supply for LS swap with AN-6 adapter fittings included..
  • Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This filter-regulator is commonly installed near the tank so that only a short return line is required..
  • This is a popular fuel supply solution for fuel injection (EFI / FI) retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s..
Check Stock

NEW HOLLEY 97 GPH RED ELECTRIC FUEL PUMP WITH BRACKET,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY

  • Brand New Holley 97 GPH Red Electric Fuel Pump (Part #12-801-1).
  • Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Maximum pressure is 7 PSI | Motor draws 2 amps current | Relay kit P/N 12-753 & 7 1/2 amp fuse recommended | Constant fuel flow with no pulsation | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Red logo | Flows 97 GPH (free flow) | Flows 71 GPH at 4 PSI | Regulator is not required.
  • Has externally accessible pressure relief valve (max 7 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 2.88 lbs | Not designed or recommended for use with fuel injection systems | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 97 | Free Flow LPH: 367 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8″ NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8″ NPT | Product Type: Fuel Pump | Pump Body Color: Silver.
Check Stock

DWVO Fuel Pump Compatible with 83-91 Ford F150 F250 F350 E150 E250 E350 Mustang Ranger LTD Thunderbird Mercury Marquis Lincoln Continental

  • DWVO fuel pump is designed as a replacement for your worn-out fuel system part, will help optimize your vehicle’s performance and fuel efficiency.
  • Using an enhanced fourth-generation turbo pump as motor to provide proper power and fuel pressure, which will accelerate fuel atomizing and shorten....
  • Adopting injection molding technology to upgrade plastic parts of electric fuel pump, greatly improve the efficiency and stability of fuel delivery..
  • Easy assembly: Only takes a few minutes to install the sealing ring and swing arm to complete.
  • the provided online installation manual and user manual....
  • Please double check your vehicle info and refer to detailed vehicle fitment on product description page below..
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock