Reviews Electric Fan Clutch Control

HARUMA F4UZ8A616-A Engine Cooling Fan Clutch for Dodge 90-91 Dakota, for Ford 88-96 Bronco/F-150/ F-250/ E-150/ E-250/ E-350, 88-93 F-350, for Mercury 84-86 Grand Marquis

  • 【 Fit for 】-- Cooling Fan Clutch for 1990-1991 Dodge Dakota.
  • 1988-1996 Ford Bronco/F-150/F-250/E-150/E-250/E-350, 1988-1993 Ford F-350.
  • 1984-1986 Mercury Grand Marquis. Note: Please check your model before the purchasing.
  • 【 Interchange Part Number 】-- F4UZ8A616-A.
  • 【 Better Performance 】-- Our Cooling Fan Clutch will effectively help restore fuel economy and reduce the noise during driving which has past a variety of complex terrain and environmental testing, more stable and reliable for a long service life.
  • 【 Electric Radiator Cooling Fan Clutch 】-- Keeps the engine cool as it operates. It is also an essential part of the whole vehicle cooling system including the air conditioning system as it also cools the Radiator and the Freon flowing from the AC compressor. The fan clutch is driven by the power from the engine and only engages when needed.
  • 【 Lifetime Warranty 】-- HARUMA Engine Cooling Fan Clutch will be offered a lifetime warranty. If it has any quality problems, please contact us and satisfied solution will be offered.
Check Stock

Electronic Radiator Fan Clutch - with Harness - Fits Chevy Trailblazer 2002-2009, EXT, GMC Envoy, Buick Rainier, Isuzu Ascender, Bravada, Saab 9-7x - Replaces 25790869, 622-001, 15-40133, 15293048

  • REPLACeMENT ELECTRIC FAN CLUTCH WITH HARNESS – Keeps the engine cool as it operates. It is also an essential part of the whole vehicle cooling system including the air conditioning system as it also cools the radiator and the freon flowing from the AC compressor. The fan clutch is driven by the power from the engine and only engages when needed..
  • FITS THE FOLLOWING VEHICLES – 2004 – 2007 Buick Rainier | 2002 – 2009 Chevrolet Trailblazer | 2002 – 2006 Chevrolet Trailblazer EXT | 2002 – 2009 GMC Envoy | 2002 – 2006 GMC Envoy XL | 2004 – 2005 GMC Envoy XUV | 2003- 2008 Isuzu Ascender | 2002 – 2004 Oldsmobile Bravada | 2006 – 2007 Saab 9-7x |..
  • REPLACeS PART# 25790869, 622-001, 15-40133, 15293048, 8103830290, 10383029, 15192192, 15192191, 154937, 15-40133, Duralast 922498, 376734021, Dorman 622001 found on the popular Trailblazer and Envoy models including years 02, 03, 04, 05, 06, 07, 08, 09. The fan clutch can easily be located attached to the fan between the engine and the radiator..
  • OEM FIT, QUALITY, FINISH – While this is NOT a genuine GM, Isuzu, Dorman, Duralast part it is a direct replacement and it will appear, fit and work like the factory part. If you are experiencing w....
Check Stock

Engine Cooling Fan Clutch Fit For 2002-2009 Trailblazer Envoy 4.2L 5.3L

  • Fan Clutch for 2002-2009 Chevrolet Trailblazer； for 2002-2009 GMC Envoy； for 2003-2007 Isuzu Ascender； for 2005-2007 Saab 9-7x； for 2002-2004 Oldsmobile Bravada.
  • Interchange Part Number: 12G-3200, 12G3200.
  • Perfect Match for the Original Car. Please verify Fitment or Application.
  • Package Includes: 1 * Electric Radiator Cooling Fan Clutch.
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

ECCPP Engine Cooling Fan Clutch Replacement fit for 2005-2009 Jeep Grand Cherokee/Commander/Liberty

  • FITMENT – This fan clutch fits for 2006-2008 Jeep Commander,2005-2009 Jeep Grand Cherokee,2005 2006 Jeep Liberty.
  • FUNCTIONS – It regulates cooling air flow by controlling fan speed in accordance to ambient air temperature around radiator area optimal heat balance is maintained in engine’s cooling system.It driven by engine revolution can continuously change its fan speed by regulating silicone oil control by temperature sensor.Controlling it speed will minimize power loss,realize optimal temperature level,and enhance quietness..
  • SPECIFICATION – Connector Internal Diameter: 1.57Inches.
  • ATTENTION – Donâ€t forget to search for See all vehicles before purchasing,and you can also look though the information including picture just avoid buying a wrong item.
  • ECCPP PERFESSIONAL COOLING FAN CLUTCH MANUFACTURE – If you have any questions about our engine cooling fan clutch,never mind contact our friendly, helpful,and knowledgeable customer service representatives,we will be glad to address any questions or concerns promptly.And 1 YEAR WARRANTY..
Check Stock

cciyu 8"Inch Push Pull Slim Electric Radiator Cooling Fan Mount Kit Universal Plastic Black

  • FIT VEHICLES – Radiator/Condenser cooling fan is universal and OE fitment or replacement, push or pull type.
  • FEATURES – Our engine cooling fan assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our fan assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • EASY INSTALLATION – Step 1: For Electric Radiators, Disconnect Electrical Wiring. Step 2: Remove Radiator Fan Shroud.
  • Step 3:Remove the Old Fan.use your wrench and/or ratchet and socket set to remove the bolts or disassemble the fan clutch and fan assembly.
  • Step 4: Replace Radiator Fan.insert new fan into the space where the old radiator fan was previously installed.
  • Step 5: Reattach Electric Wires and Test..
  • PAKCAGE INCLUDING – We offer 1 piece of high performance radiator cooling fan and buy with confidence..
  • NOTE – Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock

X-BULL Winch-13500 lb Load Capacity Electric Winch Kit 12V Synthetic Rope,Waterproof IP67 Electric Winch with Hawse Fairlead with Wireless Handheld Remote and Corded Control Recovery

  • [Features] Our winch has a new generation of wireless remote control, with an IP67 waterproof grade, that can operate accurately from a distance regardless of terrain or weather. This versatile controller incorporates wired and wireless control (up to 35m).
  • [Electric Winch] The 13500 lb. winch powered by a 4.5kw/6.0hp output permanent magnet DC 12V motor. The new solenoid successfully implements the principles of heat insulation, toughness, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power. The connection between the clutch and the gear is strengthened by the new clutch system, making it more difficult to damage the clutch..
  • [Safety] For positive load control, there is a Power in & Power out motor. The powerful current can not only support the motor's operation smoothly and work within its rated current without any current impact, but also ensure the electric winch safety and your safety at all times. A 3 stage, 6.0 HP series wound motor comes with a 265:1 planetary gear ratio..
  • [Gear System] With its modern and effective 3 planetary gear system, free spooling clutch and ability to deliver strong traction under load and higher linear speed, this electric winch will prove to be an invaluable tr....
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

Four Seasons 36895 Reversible Fan Kit

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
  • BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
  • Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock

YHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit (3pcs) - Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit

  • 【Item name】 Fan Clutch Nut Wrench, Clutch Removal Tool Kit, Fan Clutch Wrench Set, Water Pump Holder Removal Tool Kit, designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan..
  • 【Compatible with】Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36.
  • 【Applications】32mm Clutch Removal Tool Kit Made to be compatible with BMW engine models M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32.
  • 【Features】FEXON Fan Clutch Wrench Set makes it easy to hold water pump pulleys in place while you loosen and service your radiator fan. The tools have been heat treated to improve product performance..
  • 【Easy to Use】Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
Check Stock