Reviews Edge Pull Screws

Barn Door Handles 2 Pack 12 inch - Barn Door Handles Black Barn Door Handle Double Sliding Barndoor Hardware Bard Plate - Barnwood kit, Inset Knobs Finger Flush Pulls Barnyard Barb Latch Closure Pull

  • ... barn door handles] come with two sides, Interior flush finger pull (size: 8-5/8" L x 2-5/16" W), recess depth 1/8". Exterior round barn door pull handle (size: 11-3/4" L x 1'' Diameter). Door Panel THICKNESS: 1-3/8 inch and 1-3/4 inch, fit all standard door size. If you have a thicker door panel, please use longer screws. It is good for wood, glass and aluminum doors (please change hard screws)..
  • [Black barn door handles set] come with 1 x round barn door handle pull, 1 x flat finger pull, 2 x screws (L: 2-3/8”), 2 x pad (Diameter: 1-7/8”), 2 x Hex Key wrench. (Door NOT included). 1 x Barn door lock (or barn door latch) is included with barnwood door hardware kit as bonus to secure the barn door pulls. Enjoy the sliding barn door handle with years to come..
  • [Black barn door handles and pulls] can be used indoors and outdoors, for barns, doors, gates, garages, sheds, closets, sliding doors. Bar door pull is sturdy yet stylish and elegant. The modern slick design allows barn door handle black to be used as a luxury addition to your interior home décor as well as the rustic charm to your barn, door, gate, garage, shed and closet..
  • [Easy Installation] To install bard door handle, drill two holes in the door, slide the two bolts through and tighten bla....
Check Stock

(2 Pack)Probrico Black Rectangular Recessed Flush Handles Sliding Door Pulls Stainless Steel Closet Door Finger Pulls 6 Inch(150mm) Length Flush Pull Handles

  • FREE OF SHARP EDGE:Smooth surface and edges are finely chamfered,provide comfortable grip and quality feeling.The material of the pull is stainless steel,not easy to fade and rust..
  • APPLICATION:Black recessed rectangular flush pull suitable for pocket door,sliding barn door,bifold door.Also suits with cabinet,drawer,closet,cupboard,furniture,kitchen,bedroom and so on..
  • INSTALLATION:Fixed perfectly into the hole by 2 screws or glue,invisible screws on top surface.If you sliding door is two sides pulls,your door thickness should more than 20mm..
  • SIZE:Length * width is 6 inch(150mm)*2 inch(50mm).Groove depth is 2/5 inch(10mm),groove length * width is 4-4/5 inch(122mm)*1-1/5 inch(30mm),large enough to grasp..
  • SERVICE:If there is any quality problem with your order,please contact us.We will refund the item value or send a replacement..
Check Stock

Yakamoz 2 Set of 7Pcs 1/4' Hex Shank Magnetic 5 Point Security Star Torx Screwdriver Bits Set | T10-T40, 2-Inch Length

  • Type: 5 Point Star Head, Shank: 1/4″ Hex, Length: 2″/ 50mm.
  • Powerful magnetic, makes it easy to fix bit and pull screws out..
  • Exquisite workmanship, each edge can be accurately locked screws, no damage to the screw and the screwdriver head..
  • Widely used for power tools, household appliances, precision instruments industry, furniture industry..
  • Made of high quality S2 steel, firm and durable. Good toughness, hard to rupture and wearproof..
Check Stock

SUYA 12 Inch Sliding Barn Door Handle Heavy Duty Pull and Flush Set Large Rustic Two Side Design Fits for Kitchen Gate Sheds Garage,Antique Bronze Finish

  • SOLID CONSTRUCTION:Made out of high quality carbon steel,which ensures that the product will not rust and corrode during long-term use, and years of beauty and longevity..
  • ONE RIVET:It is cut by laser and welded firmly.
  • the edge of the handle is smooth and not easy to be injured.
  • the panel is made of 4.8 mm thick plate which is raised very minimally above door surface and is not noticeable but allows fingers to grasp edge to move the door..
  • PRODUCT PARAMETERS:The square bar with 300mm/12" length in 25mm/0.98" diameter.
  • the backside with 220mm/8.66" length X 60mm/2.36" width X 4.8mm/0.189" thickness..
  • PACKAGE INCLUDED:The accessory pack with a clear instruction manual are offered in the package to finish the whole installation effortlessly,1 x finger pull, 1 x pull handle, 2 x screw (M8x60), 2 x pad, 2 x wrench .only the hardware is for sale, door not included.Fits for door thickness up to 45mm/1.77"..
  • EASY INSTALLATION:Fits for gate kitchen shed and garage and more.Easy to install with a basic drill and bit.Just drilling two holes in the door to combine the handle and finger pull with two screws..
Check Stock

SUYA 12 Inch Sliding Barn Door Handle Heavy Duty Pull and Flush Handle Set Large Rustic Two Side Design Fits for Kitchen Gate Sheds Garage,Antique Bronze Finish

  • SOLID CONSTRUCTION:Made out of high quality carbon steel,which ensures that the product will not rust and corrode during long-term use, and years of beauty and longevity..
  • ONE RIVET:It is cut by laser and welded firmly.
  • the edge of the handle is smooth and not easy to be injured.
  • the panel is made of 4.8 mm thick plate which is raised very minimally above door surface and is not noticeable but allows fingers to grasp edge to move the door..
  • PRODUCT PARAMETERS:The square bar with 300mm/12" length in 25mm/0.98" diameter.
  • the backside with 220mm/8.66" length X 60mm/2.36" width X 4.8mm/0.189" thickness..
  • PACKAGE INCLUDED:The accessory pack with a clear instruction manual are offered in the package to finish the whole installation effortlessly,1 x finger pull, 1 x pull handle, 2 x screw (M8x60), 2 x pad, 2 x wrench .only the hardware is for sale, door not included.Fits for door thickness up to 45mm/1.77"..
  • EASY INSTALLATION:Fits for gate kitchen shed and garage and more.Easy to install with a basic drill and bit.Just drilling two holes in the door to combine the handle and finger pull with two screws..
Check Stock

LICTOP 6 Pack 50mm/1.96

  • ✔Package Included—- 6 x Finger Edge Tab Pull Handle,Screws.
  • ✔Product Material—- Made of Aluminum Alloy.
  • ✔Product Size—- Overall Length : 50mm/1.97″,Width : 32mm/1.26″,Center to Center: 32mm/1.26″..
  • ✔Easy to Install—- Use a simple manual or powered Phillips-head screwdriver to attach these in seconds. Pre-drill holes to help maintain surface integrity..
  • ✔Widely Use—- This cabinet finger pulls can be used for many home furniture, like drawers, cabinets, wardrobes, wine cabinets, bath accessories, switch plates, door knockers..
Check Stock

(1 Pack)Probrico Recessed Door Pull Brushed Nickel Flush Pull Handle Stainless Steel Pocket Door Pull Rectangular Sliding Door Pull 6 Inch(150mm) Length Closet Door Finger Pull

  • Free of Sharp Edge:Smooth surface and edges are finely chamfered,provide great finger grip to work.Constructed with stainless steel,practical for a long time.There is 1 pack flush pull in the package,not 2 pack..
  • Modern:Brushed nickel pocket door handle suitable for multiple style.Ideal for pocket door,sliding barn door,bifold door,kitchen cabinet,bedroom drawer,closet,cupboard and furniture..
  • Easy to Install:Fixed perfectly into the hole by 2 screws or glue,invisible screws on top surface.If you sliding door is two sides pulls,your door thickness should more than 20mm..
  • Size:Length * width is 6 inch(150mm)*2 inch(50mm).Groove depth is 2/5 inch(10mm),groove length * width is 4-4/5 inch(122mm)*1-1/5 inch(30mm),large enough to grasp.There is 1 pack flush pull in the package,not 2 pack..
  • Service:If there is any quality problem with our products or you have no idea how to install,please contact us we will try our best to help you..
Check Stock

KUKUVI Wall Mounted Doorway Pull Up Bar, Multifunctional Heavy Duty Chin Up Over Door Frame Fitness Bar, Upper Body Workout Home Iron Gym System, Trainer Indoor, Training Exercise Max Loading 450lbs

  • ...have to worry about hitting your head..
  • EASY INSTALL & STURDY : Reasonably distributed hole position design can make the chin-up bar receive strength evenly once installed and enable it to carry larger weight. And the bar is equipped with higher quality stainless steel screws to ensure that the screws will not loosen or fall off during use, ensuring that you can use them safely..
  • ❤️Installation Notes: concrete brick / solid cement wall / solid red brick wall / solid tile wall / solid wood thick than 2.36 inch are a great surface for mounting this pull up bar. DON'T install on hollow brick wall / honeycomb brick wall / drywall / sandwich panel. Drill with 10 mm (2/5 Inch) bit for concrete or brick walls..
Check Stock

NC HAISDA Brass Corby Bolts Rivets EDC Knives Maker Pivot Pin Fasteners DIY Knife Handle Studs Screws Pack of 10 6mm

  • ...er side and tighten it, and the installation is complete..
  • 【Package Listing】The set contains a variety of specifications and color combinations, 10 x golden pull ring nails, 10 x silver pull ring nails, 10 x black pull ring nails, 10 x antique brass pull ring nails, 10 x bronze pull ring nails, 10 x golden cross Screws, 10 x silver Phillips screws, 10 x black Phillips screws, 10 x antique brass Phillips screws, 10 x bronze Phillips screws, can meet your different decoration needs..
Check Stock

Amerock | Cabinet Edge Pull | Polished Chrome | 6-9/16 inch (167 mm) Center to Center | Aloft | 1 Pack | Drawer Pull | Drawer Handle | Cabinet Hardware

  • 6-9/16 in (167 mm) Center-to-Center Edge Pull.
  • Includes mounting hardware: M4 x 1/2in Flat Head Wood Screws.
  • Intricately crafted with precise detail for lifelong beauty and durability.
Check Stock