Reviews Ecu Chip Turning Tool

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Autel Scanner MaxiSys Ultra, 2023 Newest MSULTRA Top Intelligent Diagnostic, [$2000 5in1 VCMI], Topology, ECU Programming & Coding, 40+ Service, Upgraded of MS919/ MS909/ Ultra Lite, FCA Autoauth

  • ...ehicle diagnostic scan tool has full bi-directional control capability over various car systems and components and is able to command the actuator to perform specific tests to pinpoint faults in the quickest way, such as EVAP Test, Cylinder Cut Out Test, Cylinder Compression Test, ERG Test, Window/ Door/ Roof Test, Turning the fuel pump on and off, Cycling the a/c clutch on and off and etc..
  • 【25 SERVICES+ 23 ADAPTATIONS】Autel MS908CV professional HD scanner can perform 25+services like Oil Reset, Injector Coding, D-P-F, ABS bleeding, SAS, Throttle, Cylinder, Trans Adaptation etc, and 23 adaptation functions such as Boost Calibration, Rack Sensor Calibration, Timing Calibration, Monitor Throttle Position Sensor, Fuel Pressure Adaptation and etc. Services are not universal to all CV, please send VIN to autelauthorized @ outlook .com to check compatibility..
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

THINKCAR Thinktool Automotive Diagnostic Scan Tool with OBD1 Adaptors, OE-Level All Systems Diagnosis, Bi-Directional Control, Active Test, ECU Coding, 28+ Service Reset, TPMS Relearn Tool

  • ... TPMS, SAS, Light, Wiper ,Air Conditioner etc...
  • 【ECU Coding + Active Test (Bi-directional Control)】: It supports advanced ECU coding to help workshops unfold the hidden features.It also features B-i-Directional Control (Active Test) to request information or command a actuator to perform specific tests, such as turning the fuel pump on and off. This function is mainly used to test whether the executive components in the electronic control system can work normally..
  • 【99% Vehicle Coverage+Outstanding Hardware】: Not only does the scanner cover a wide range of languages, but it is also one of the best in terms of model coverage 99% of vehicles on the road is covered. The excellent software also requires solid hardware. It equipped with a set of reliable hardware，Android 7.0, 32GB storage, 7-inch LCD touch screen.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock

LAUNCH X431 PADVII, ECU Programming Scan Tool, Topology Map Full System Intelligent Diagnostic Scanner, Online Coding, 60+ Services, Heavy Duty Truck Scanner, 13.3 Inch,5G WiFi,2 Years Free Updates

  • ...s, such as Benz, BMW, Porsche, etc, It can program/ rewrite/ code/ match the blank/used ECUs and upgrade the ECU software version. ECU Coding for Component Matching after replacement or reflash modules to activate hidden features / deactivate features, without the use of often very expensive factory automotive scan tools. ECU Programming and Coding is not universal, please send VIN to check before ordering..
  • [UNMATCHED COVERAGE, Truck & Car 2 in 1 Diagnostic Tool] 2022 LAUNCH diagnostic tool works on 200+ car brands, support 12/24V passenger cars & commercial vehicles. FCA Secured Gateway Access (SGW) Authorization “OE-level coverage for Asian, Euro, Domestic Cars, Launch x431 padvii not only supports J2534 diagnostic standard but also exclusively supports D-PDU/ RP1210 and CAN2.0/CAFD/DoIP protocols, which makes it compatible with OE factory tools to perform further services and programmings..
  • [2022 LAUNCHX431 PADVII: TOP INTELLIGENT DIAGNOSTIC] LAUNCH X431 PADVII diagnostic scan tool is the first intelligent one in industry ①Topology module mapping overview of virtually the all-systems communication status②Pin detection function to detect pin volt, data rate, and protocols. ③OE-Level bi-directional functionality④Guided functions,step-by-ste....
Check Stock

LAUNCH X431 PAD VII, 2023 J2534 Reprogramming Tool, ECU Online Coding, Topology Map Intelligent Diagnostic Scanner, 2 Years Free Update, Upgraded of X431 PAD3/ V+, 50+ Services, Bi-Directional Control

  • 【LAUNCH X431 PAD VII, 2023 Top Diagnostic Scanner】 The latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 30+ car brands (the most on market), ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 50+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII is a worthwhile investment for repair shops and mechanics..
  • 【Huge-Upgraded ECU Programming & Coding】 Beyond the reach of most competitors, LAUNCH X431 PAD VII features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools.
  • 2) Programming offline or online, manual or automatic to meet more needs.
  • 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality d efect firmware. Coding features: Recode ECU Data, Personalization, and loads of more..
  • 【LAUNCH X431 PAD VII, 50+ Services & Topology】 LAUNCH X431 PAD VII bidirectional scan tool has 50+ service functions, like Oil Reset/ABS Bleeding/Injector Coding/AdBlue Reset … to win more business. Topology mapping checks DTCs and all-system communication status visually in....
Check Stock

Thinkdiag Full Systems Bluetooth OBD2 Scanner for Over 10000+ Cars Automotive OBDII Code Reader Bidirectional Diagnostic Scan Tool with ETS, EPB, TPMS, Air Suspension, AFS,SAS, BMS,ABS Bleed, DPF

  • ... 【Bi-Directional/Active Test + ECU Coding + Adaptation + Matching 】THINKDIAG is professional car diagnostic tool supports ECU Coding, Adaptation, Matching, IMMO (Key Coding), Active Test which allow you to test each system actuator such as doors, windows or windscreen wipers to identify malfunction causes, turning the fuel pump on and off, cycling the a/c clutch on and off..
  • 【16 Reset Service Functions OBD2 Scanner + Auto VIN Scan Tool】Besides auto vin scan supported, thinkdiag can relearn reset Electronic Throttle Position, Oil Service, EPB, TPMS, Air Suspension, Gearbox, Sunroof , AFS , EGR Reset, Steering Angle Calibration, Battery Register ,ABS Bleeding, DPF, Anti-theft Matching, Injector matching.Which is great for garage and mechanics..
  • 【Live Data Stream Graphing + Data Record+Print Vehicle Health Report Print +Remote Diagnostic Car Scanner】Live data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter, and thinkdiag can generate vehicle health report after finished diagnosis, you can print the diagnostic report online.This car scanner support Tech to Tech perform ....
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

XTOOL D9 Automotive Diagnostic Scan Tool with 3 Years Updates($900 Value), 2023 Newest, CAN FD & DoIP, Topology Mapping, 42+ Services, ECU Coding, Bi-Directional Control, All Systems Diagnostics

  • 【Smart Diagnostic System】XTOOL D9 is a 2023 new released 9.7” smart diagnostic tool featured OE level all systems diagnostics, Module Topology Mapping, full bi-directional controls, 35+ special functions, ECU coding capabilities, support CAN FD/DoIP/RP1210/OBDII protocol vehicles, comes with Complete Connector Kit and can work with key programmers, inspection camera to extent capabilities. NOTE: Please reach us with VIN # via xtoolofficial @ hot mail c om to check compatibility before purchase!.
  • 【Module Topology Mapping】XTOOL D9 intelligent diagnostic computer comes with Module Topology Mapping that displays interrelationships among various vehicle modules and views faulty modules in one glance to reduce guesswork performing all systems scan and improve diagnostic efficiency by 60% for automotive technicians, mechanics, car dealers and advanced DIY mechanics. NOTE: Software already released for GM, for Ford, for Toyota, for Honda, for Nissan, for Mazda and for BMW. More to come..
  • 【ECU Coding + Programming】XTOOL D9 ECU Programming & Coding tool can perform Offline Programming on Ford, Lincoln, Mazda vehicles, to update ECU software/firmware, program....
Check Stock