Reviews Easy to adjust Electrode Holder

Welding Arc Welding Electrode Holders 300Amp Copper Heavy Duty Jaw Welding Rod Holder Plier Clamp of Welding Machine Materials for Arc MMA/Stick, Black

  • Great for most Arc, MMA, Hand Stick welding jobs.
  • Arc welding electrode holders with a comfortable insulated handle and easy to operate..
  • Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
  • High quality electrode holder is with highly conductivity and improved cable connections..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

  • Welding rod holder Accepts rods up to 5/16''.
  • Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
  • Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
  • Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
  • high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

ORRIL 300A American Style Welding Electrode Holder for ARC MMA Welder

  • 1.300Amps Welding Electrode Holder American Style.
  • 2.With 35-50 quick plug. Easy connected..
  • 4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
  • 5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

  • 200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
  • 12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
  • Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
  • TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
  • For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..
Check Stock

SPRIGHOLLY 300Amp Electrode Holder Copper Plier Electrode Clamp of Welding Machin Stick Rod Suitable for ARC Stick/MMA Welding Machine (300A)

  • ★Electrode Holder can be used for 300A..
  • ★Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode. grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions..
  • ★MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • ★Constructed for long life and dependability.
  • ★Suitable for ARC Stick/MMA Welding Machine. Hand Stick welding jobs..
Check Stock

300 Amp Welding Electrode Holder ESAB MMA ARC Stick Manual Head-Screw twist type

  • Reliable fixing of an electrode sure contact of the holder with an electrode.
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work.
  • Lack of uninsulated surfaces of the holder.
  • Reliability of fastening doesn't become worse as at other holders over time.
Check Stock