Reviews Easy clean Nozzle

MisterVac compatible with floor nozzle turbo nozzle turbo brush replacement nozzle TurboTronic TT-VC09 700w

  • ✔ SCOPE OF DELIVERY: MisterVac floor nozzle turbo nozzle turbo brush replacement nozzle.
  • ✔ NEW: More flexible thanks to divided rubber lips. The split rubber lips make the turbo nozzle more flexible than the previous version with only....
  • ✔ INNOVATIVE: Thanks to the more effective turbine, less vacuum and a lower air flow rate are required for optimal performance. The ball joint....
  • ✔ EASY-CLEAN: Clean the brush with two clicks. The brush of the turbo nozzle is easy and convenient to clean. To do this, simply slide the locks to....
  • ✔ QUALITY: MisterVac is the manufacturer of this vacuum cleaner nozzle, so we guarantee 100% compatibility and maximum performance for this model..
Check Stock

KIPA 288716 Airless Paint Sprayer Replacement Inlet Strainer, 3/4-Inch Thread, Fits for Magnum X5 LTS15 X7 LTS17 ProX7 ProX17 ProX9 ProX19 ProX17 ProLTS 170 ProX19 ProLTS 190 Airless Sprayer Painter

  • Quality materials: reversible airless spray tip nozzle is composed of 304 stainless steel handle and tungsten carbide hole, stable and reliable, not easy to break or damage.
  • The head is made of stainless steel head gasket and nylon, leakproof, wear-resistant, tasteless, non-toxic, easy to clean, and can be applied for a long time.
  • Nozzle installation instructions: this paint spray tip can be easily installed on the spray gun without any tools.
  • Use the paint spray tip to seal the nozzle into the protective base.
  • Then insert the spray head into the protective base and rotate to complete the installation step, easy to operate in a few moments.
  • Practical design: the airless sprayer nozzle has a reverse airless cleaning switch nozzle design, the spray can be quickly cleaned in a reversible position to prevent the nozzle from clogging, practical and effective for your work.
  • Package contents: you will get 5 pieces of reversible airless sprayer nozzles in 5 sizes, each one has an airless sprayer nozzle and a nozzle seal.
  • The 5 models are 211, 313, 415, 517, and 623 respectively, which can fully meet your daily use and replacement needs.
  • A wide range of uses: these airless sprayer spraying machine parts can be compatible with mo....
Check Stock

Upgraded Electric Portable Travel Bidet, Contain Large water bottle, Two size adapters, USB Charger, Handy Toilette Sprayer Good for Personal Care

  • 2PCS-PACK - SAFE AND STAY CLEAN, the easy way to refresh yourself after bath or toilet use, handheld size and easy to carry, the portable bidet bottle is perfect for personal clean at home, office, on vacation, travel,puerpera and more..
  • ERGONOMIC DESIGN, Lengthened pipe and detachable nozzle for easy cleaning - About 7.5" angled nozzle allows easy use with minimum body movement and maximize cleaning efficiency..
  • NO BATTERIES Needed, simply fill with Cool or Warm water and easy to squeeze bidet bottles, You will get a new refreshing experience. and also save wads of toilet papers..
  • LARGER IS BETTER ! 15 OZ/450 ML extra capacity soft squeeze bottle - 7 Increase nozzle holes ensure stronger pressure, enough water and a wider area of cleaning..
  • ONE NOZZLE and TRAVEL BAG , Easy storage, fit for everyone clean,universal and comfortable!!.
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

Pressure Washer Extension Wand, Aihand 24FT Telescoping Power Washer Wand with Gutter & Brush Cleaner Attachment, 7 Spray Nozzle Tips, 2 Hose Inlet Adapters & Belt Harness, 4000 PSI

  • ...le belt support harness. This helps you have better control of the pressure washer gutter cleaner and reduces the strain on your neck, arms and back. No need to climb ladders, it makes your cleaning job safer and more efficient, allowing you to clean in comfort.
  • 【7 Spray Nozzle Tips】Aihand offers 7 different spray angles to make it easy to reach hard-to-reach areas. Nozzle kit includes 4 high pressure stainless steel quick connect nozzles (0°red nozzle, 15° yellow nozzle, 25°green nozzle, 40°white nozzle), one low pressure nozzle (65°black soap nozzle) and 2 jet stream tips (Blue tip for rinse mode, Pink tip for soap mode). They meet your cleaning needs in a variety of situations such as roofs, cars, fences, walls, windows, etc.
Check Stock

1 1/4" Vacuum Attachments Brushes for Small Shop Vac Accessories 1/4 inch or 1 3/8 inch Vacuum Cleaner Accessories

  • ...should be smaller than 1-1/4inch(32mm) which is 31mm or 30.5mm.
  • 1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
  • 1-1/4'' Nozzle Combination Tool, designed to clean the crevice and dust the board.NOT for shark vacuum attachments,DON’T for hoover vacuum attachments,DON’T fit the OEM hose,Not for rigid vacuum,DON’T fit dewalt shop vac,DON’T fit Dirt Devil model .
  • 1 1/4'' Vacuum Attachment Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
  • Vacuum cleaner accessories set includes 1.25" brush & nozzle combination tool, 1.25" round brush, 1.25" flexible flat suction nozzle, 1.25" upholstery tool brush,1.25" utility nozzle with brush, 1.25" crevice nozzle tool. High quality. Easy to install.Easy to clean..
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

TREVI Bidet Toilet Seat, Elongated White Seat Sleek Design, Warm Air Dryer, Rear & Front Wash, Stainless Steel Nozzle, Nozzle Self-Cleaning, Nozzle Oscillation and Pulse, Korea Made AB210

  • TREVI BIDET TOILET SEAT AB210 - More hygienic with a full stainless steel nozzle / Clean and powerful wash with 3-wash modes / Compact and slim size with modern and sleek design / Various mode select with one-touch button side control panel.
  • 3 WASH MODES - The Posterior and Feminine modes wash posterior and feminine area comfortably with aerated water. The Aerated exclusive wash mode helps pass motions, which is good for constipation. Pressing the Move button, the nozzle oscillates back and forth for wider cleansing..
  • ADVANCED EXPERIENCE - The AB210 features a heated seat, warm air dryer, full stainless steel nozzle, nozzle oscillates, self-cleansing nozzle, massage mode (water pressure pulsates from strong to soft), dry temperature select, seat temperature select, power saving mode, etc..
  • MODERN AND SLEEK DESIGN - Sleek and compact design matches well toilet bowl in your bathroom. With the sleek shape for the perfect toilet fit. The front design of Trevi bidet seat is so simple designed, featuring less impurities, more clean..
  • POWERFUL NOZZLE CLEANING - Self-cleaning nozzle automatically cleans before and after toilet use. Pressing the 'NOZZLE CLEAN' activates a 2 minutes automatic self-cleaning with powerful water stream..
Check Stock

Oil Sprayer Mister for Cooking 210ml Olive Oil Spritzer Bottle Galss Oil Spray Dispenser Bottle Oil Vinegar Sprayer Bottles Kitchen Gadgets for Air Fryer,Salad,BBQ,Baking

  • New Upgraded Rotary Nozzle:The spray bottle is fitted with a unique spray nozzle,the nozzle can be rotated,and you can turn the nozzle to adjust the angle of the spray and control the pressure to change the spray pattern.The spray nozzle is fan-shaped for spraying uniformly while keeping the nozzles clean and free of oil dripping from the nozzles..
  • Food Grade Material:The oil sprayer for cooking is made of food grade PET and thickened glass with completely BPA free,high temperature resistant.Non-slip push handle,and won’t slide away,large area press grip,easy to press and control the dosage.Enjoy your food while reducing your fat intake,creat a more healthier life for us..
  • Effective Control of Oil Flow:The oil spray bottle is ergonomically designed non-slip press handle,no pressure required,fan-shaped atomiser nozzle,uniform control of oil,less calories,a low-fat,healthy life..
  • Multi-purpose Oil Sprayer:This oil spray dispenser bottle is the perfect tool for home and kitchen. Fill the vaporizer with your favorite oil,vinegar,juice and wine etc.Make an even and convenient mist for grilling,salad,baking,BBQ.It can also be used to spray alcohol and water to clean the kitchen and furniture,and it can also be used to water plants..
Check Stock

AR Blue Clean PW909300K Trigger Gun Kit. Electric Pressure Washer Trigger Gun Kit. Includes: Trigger Gun, M22 Lance, Foam Cannon, High Pressure Hose, Quick Connect Nozzles

  • Excellent for electric, cold water pressure washers. Fits the BC383HSS, BC390HSS, BC2N1HSS, BCXP22300P, Maxx 2300, Maxx 3000, BMXP32300, BMXP32700P, SHP2150, SLP2050.
  • Trigger Gun: Constructed with a nozzle holder for easy storage, and a fully integrated trigger to reduce fatigue..
  • M22 Connection: This trigger gun is constructed with an M22 x 15mm inlet and an M22 x 11.5 outlet, which maximizes versatility..
  • 25-Foot Hose: This 25-foot hose is extremely flexible and forgiving. The max psi rating of this hose is 2,900, and a max temperature rating of 140℉..
  • Metal M22 Lance: Constructed with an M22 inlet and a quick connect outlet this lance is extremely functional and user friendly. Switch between attachment with ease using the quick connect system..
  • 25 Ounce Foam Cannon: Cut through dirt and grime with ease using the 25-ounce quick connect foam cannon, which includes an adjustable detergent knob and spray angle..
  • Red Nozzle: The red quick connect nozzle has a zero-degree spray pattern, which is ideal for direct cleaning on smaller cleaning surfaces..
  • Yellow Nozzle: The yellow quick connect nozzle has a 15-degree spray pattern, which is great for precise cleaning over small to medium sized surfaces..
  • Green Nozzle: The green quick connect nozzle has a 25-degre....
Check Stock