Reviews Dust Separator Kit

Taytools 114971 4 Inch Dust Collection Cyclone Separator Kit for Trash Cans Barrels or Custom Built Containers

  • Convert dust collector to two-stage unit with this dust separator kit.
  • Inlet and outlet ports accept a 4” dust collector hose.
  • Kit contains two elbows, two couplers, two hose clamps and all needed hardware.
  • Prevents debris from reaching the impeller and clogging the filter.
  • Perfect for use with Table, Saws, Jointers, Planers, Router Tables and much more.
Check Stock

Dust Right Dust Separator + 36” Flex-Form Hose - Cyclone Dust Collector Separates Sawdust Wood Chips Debris and More – 10-Gallon Translucent Bucket - Dust Collectors for Woodworking for Shop Vacs

  • Dust Cyclone Separator: Turn any shop vacuum with a 2-1/4” ID outlet into a 2-stage dust extractor and wood chip separator. Our dust cyclone separator captures sawdust, wood chips, and other debris before it enters your vacuum, preventing the loss of suction power caused by a clogged vacuum filter..
  • Durable Filter Life: This dust extractor for woodworking extends the life of your filter and impellers by extracting the larger debris before it enters the dust cyclone separator. The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters..
  • Adapting Mounting: The five-caster base of the dust collector bucket makes it exceptionally stable and easy to maneuver around the shop. Our dust collector vacuum hoses connect inside the in/out ports, preventing unintentional disconnections..
  • Maintain Airflow: The dust collector creates a cyclonic airflow that causes most wood dust particles and other materials that are heavier than air to separate, and our woodworking dust collector prevents them from being passed to the vacuum..
  • Efficient Dust Collecting: Our 10-gallon translucent dust collector bucket is easy to empty and easy to tell when it's full. Also, this dust collection separator holds twice the capacity of competitor ....
Check Stock

6.7 Cummins Fuel Filter Water Separetor Kit | Compatible with 2019 2020 2021 Ram 2500 3500 4500 5500 6.7L Cummins Diesel Engines | Replace 68157291AA 68436631AA

  • FUEL FILTER WATER SEPARATOR KIT - Fuel filter water separator set including fuel filter & fuel/water separator filter, removes 99.8% of particles 5 microns or larger. Helps prevent stalling, poor starting and potential engine failure..
  • FIT THE FOLLOWING VEHICLES - Fuel filter water separator kit for 6.7 Cummins L6 Diesel, including 2019 2020 2021 Ram 2500, 3500, 4500, 5500 6.7L Cummins Diesel models..
  • REPLACE PART NUMBERS - Fuel filter replace 68157291AA, fuel/water separator filter replace 68436631AA. Commonly found on 2019, 2020, 2021 Ram 2500, 3500, 4500, 5500 pickup with 6.7L Cummins diesel engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine Mopar fuel filter, but it works even better and lasts longer. Save yourself times and money by replacing 6.7 Cummins fuel filter kit yourself..
  • WHAT YOU'LL GET - 1 Fuel Filter & 1 Fuel/Water Separator Filter & 12 Months Warranty. If you have any problem with our fuel filter, feel free to contact us, we will sort things out together..
Check Stock

Separation Eye lash Separator Tool Pro Lash Lift Tools and tint Kit Professional Lifting - Lashes Separater Perm Extension Separating Comb Tinting Lifter Eyelashes Seperator Supplies Silver Steel

  • This semi permanent eye lash separator tool is made of stainless steel silver. The eye pads for lash separator tool are used during the eyelash....
  • Eyelash separator tool is perfectly designed to help brush during the Eyebrow Lamination treatment. It gives you a great application with its fine....
  • Eye lash comb separator tool is useful for both lash lift and brow lamination . Eyelash tools for extensions under eye pads are easy to use on your....
  • The lash tool separator extensions kit offers multifunctional flexibility - any professional lash artist kit would be incomplete without one. The lash....
  • The eyelash brush comb can easily deal with eyelash glue or eyelashes. Y-combs help you easily achieve different styles while perming your client’s....
Check Stock

DCT Cyclone Wood Saw Dust Collection Garbage Trash Can Lid – Woodshop Dust Separator Lid for Woodworking Collector Tools

  • ENHANCED DUST COLLECTOR EFFICIENCY: Use the DCT Cyclone Wood Saw Dust Collection Garbage Can Lid – Woodshop Dust Separator Lid for Woodworking....
  • USE YOUR TOOLS: Fits most 30-gallon metal trash cans for best seal.
  • Can outside diameter must be between 19 inches (48.3cm) and 20.75 inches (52.7cm).
  • VARIOUS APPLICATIONS: Create a vacuum system and use to build a dust separator for your woodworking power tools by placing in front of your dust....
  • BUILT TO LAST: Constructed from rugged ABS plastic for reliable strength and longevity.
  • Features a foam gasket for a superior seal.
  • EASY TO USE: Place the included curved elbow fitting on the input intake side (to the Jointer) of the cyclone can and your dust collector on the....
Check Stock

Oneida Air Systems Dust Deputy Anti-Static Cyclone Separator (DD Bagger)

  • soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!.
  • MADE IN AMERICA – Comes with everything you need to convert your wet/dry vacuum into a two-stage, dust-free system. Including anti-static cyclone separator, 3.9-gallon accumulation bin, wall mount, hardware, and five clear 4 mil bags. US Pat. 7282074 and patent pending.
Check Stock

Oneida Air Systems Dust Deputy Plus Anti-Static Retrofit Cyclone Separator Kit for Wet/Dry Shop Vacuums with Collapse-Proof Bucket Lid and Hose DD Plus

  • ...oot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!.
  • MADE IN AMERICA – Designed, patented, & manufactured in the USA, our Dust Deputy Plus kit lets you build the dust control system that’s right for you. Kit contains the anti-static cyclone separator, collapse-proof bucket lid (designed to fit most 5-gallon buckets), hose, (2) elbows, gasket, hose clamp, (2) o-rings, & mounting hardware. You supply the waste container. Note: If used with a 5-gallon bucket, the bucket must be a minimum of 90 mils thick or else it may collapse under vacuum pressure..
Check Stock

Oneida Air Systems Dust Deputy 2.5 Plus Cyclone Separator XL: Highest CFM Collector for Wet/Dry Shop Vacuums with Lid (NEW DD 2.5 Plus)

  • ...ntrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!.
  • LATEST AND GREATEST EDITION - NEW 2.5 model delivers up to 2x the airflow of smaller cyclones and lid-style separators. This simple and efficient design can be adapted for use with any make, size, or model vacuum and features female inlet and outlet ports that fit the cuffed 2.5" hoses of larger shop vacuums..
  • LONGER LIFESPAN - Prevents fine dust and large debris from reaching your shop vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Plus will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand..
  • MADE IN AMERICA – Designed, patented, & manufactured in the USA, our Dust Deputy 2.5 Plus kit lets you build the dust control system that’s right for you. Kit contains the anti-static cyclone separator, collapse-proof bucket lid (designed to fit most 5-gallon buckets), hose, gasket, & mounting hardware. You supply the waste c....
Check Stock

POWERTEC 70292 4-Inch Cyclone Dust Collection Elbows and Couplers Separator Kit for Woodworking Debris Containers Buckets and Barrels

  • INCLUDES: (2) 4” Separator Elbows, (2) 4” Separator Couplers (2) Hose Clamps.
  • FUNCTION: Provides you with a set of easy-to-install components to create your very own 2-stage dust collection system.
  • APPLICATION: Working in combination with your woodworking dust cyclone, these dust collection fittings combine to give you in-feed and out-feed points when they are utilized with debris & dust buckets, barrels, or boxes.
  • VERSATILE: Whether you’re working as a hobbyist or professional, you’ll find that these fittings and clamps to be a perfect fit for an assortment of planers, jointers, router tables and other 4” dust collector tool ports.
  • PREMIUM: All included parts are constructed of durable, rugged, anti-abrasion ABS plastic and optimized with an anti-clogging design for optimal efficiency.
Check Stock

POWERTEC 70301 Dust Collection Cyclone Separator Lid Kit w/Flexible Hoses Clamps 2 1/2 inch Elbow & Couplers for 2 Stage Dust Collector

  • KIT INCLUDES: (1) Two Stage Cyclone Separator Lid, (1) Dust Port Elbow, (2) 3’ Flexible Hoses, (2) Quick Coupler Connectors, (2) Hose Clamps.
  • FUNCTION: Cyclone dust collection systems cause a vortex action to trap and collect dust & debris inside the bucket/ barrel before it enters the vacuum, helping to prevent a reduction of suction power..
  • FEATURES: Lid possesses a foam gasket for a tight and reliable seal, elbow fitting on the inlet side to promote cyclonic air flow, ultra flex hoses that expand from 10” to 38-3/4 inches – giving you project versatility and leverage to maneuver your way around workshop machines and space.
  • APPLICATION: Quickly and easily converts your shop vacuum and standard five-gallon buckets container into a 2-stage cyclone dust collection system. Provides the necessary fittings required to connect a shop vac with a 2-1/4” ID inlet to a 2-1/2” OD diameter machine port. Perfect for woodworking, CNC machining, workshops and more.
  • PREMIUM: All cyclone dust collector components (excluding stainless steel hose clamps) are made with super lightweight clog-free ABS plastic material known for its temperature resistance and long-term durability.
Check Stock