Reviews Dust Collector Installation Kit

Panny 14PCS Microfiber Duster with Extension Pole, Extendable Long Feather Duster for Cleaning, Ceiling Fan Duster with Washable and Bendable Head, Duster for Cobweb ,Ceilings .

  • 【New Upgraded 14PCS Dust Collector Kit】This new upgraded multi-purpose microfiber duster kit includes 1 stainless steel telescopic rod, 1 short rod with hangable handle, 2 bendable microfiber duster heads, 1 chenille duster head, 1 mini chenille duster, 1 crevice brush, 1 replacement crevice brush cloth, 1 cobweb duster head, 1 louver dusting brush, 1 microfiber cleaning cloth, 1 storage bag, 1 pair of gloves. Swap out different the dusting heads to easily clean any hard-to-reach place..
  • 【Long Stainless Steel Telescopic Pole】This microfiber feather duster kit contains a stainless steel telescopic pole that can extend up to 100 inches, and the length can be adjusted according to your needs. No need to climb risky ladders while dusting! The telescopic pole allows you to dust high places and ceilings with ease. When shortened, the compact handle paired with the dust collector head makes cleaning low places and dead corners a breeze..
  • 【Bendable Dusting Head】Both the microfiber feather duster and the chenille microfiber duster can be bent to any angle so you can dust hard-to-reach areas, like office shelves, ceiling fans, picture frames, beside large appliances, and virtually anywhere! The dust collector also comes with soft rubber tip....
Check Stock

Oneida Air Systems Super Dust Deputy (4/5 DIY)

  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings..
  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, and to your tools with either a 4” or 5” hose. Includes cyclone, 2x reducer adapters, assembly gasket and hardware..
Check Stock

Taytools 114971 4 Inch Dust Collection Cyclone Separator Kit for Trash Cans Barrels or Custom Built Containers

  • Convert dust collector to two-stage unit with this dust separator kit.
  • Inlet and outlet ports accept a 4” dust collector hose.
  • Kit contains two elbows, two couplers, two hose clamps and all needed hardware.
  • Prevents debris from reaching the impeller and clogging the filter.
  • Perfect for use with Table, Saws, Jointers, Planers, Router Tables and much more.
Check Stock

POWERTEC 70293 Cyclone Dust Collector and Separator Kit w/Clear 6 Gallon Dust Bucket, Hoses, Reducers, Couplers and Hose Clamps

  • INCLUDES: Dust Separator, 6 gallon dust & debris bucket, expandable vacuum hose, reducers, couplers, hose clamps and more.
  • APPLICATION: Cyclone separator kit connects to your shop vac and tool dust collector ports and provides you with a complete assortment of components designed to capture and prevent wood chips and shavings from damaging your system.
  • VERSATILE: Reducers and couplers work with most brands and dust collection systems, accommodating tools such as planers, drum sanders and jointers - Has everything you need to optimize your 2 stage dust collector set-up.
  • EASY TO USE: Whether you’re connecting the separator directly to the dust collector, shop vac or tool dust port, you’ll find that it sets up quickly and easily while generating great separation.
  • PREMIUM: All included parts are made from durable, high quality and temperature/heat resistant material with an anti-clogging design for optimal efficiency.
Check Stock

Oneida Air Systems Super Dust Deputy 4 Cyclone

  • HIGH EFFICIENCY - Integrated air ramp and 4” neutral-vane inlet provide ultra-high efficiency..
  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. Approximately 21-5/8" height with 4" OD inlet and outlet..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Includes....
Check Stock

Oneida Air Systems Super Dust Deputy 5” Cyclone

  • HIGH EFFICIENCY - Integrated air ramp and 5” neutral-vane inlet provide ultra-high efficiency..
  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. Approximately 24" height with 5" OD inlet and 6" OD outlet..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Includes....
Check Stock

How To Design & Build Centrifugal Fans For the Home Shop

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

Abbott & Costello: The Complete Universal Pictures Collection [Blu-ray]

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

POWERTEC 70259 Dust Collection Fittings Network | Shop Dust Collector Systems For Woodworking

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock