Reviews Dust Collection

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

  • PLEASE NOTE: As configured, the hose set will connect your 1”OD port tools to a shop vac or 2-1/2” dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
  • INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
  • APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
  • VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4....
Check Stock

How To Design & Build Centrifugal Fans For the Home Shop

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

Abbott & Costello: The Complete Universal Pictures Collection [Blu-ray]

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

POWERTEC 70259 Dust Collection Fittings Network | Shop Dust Collector Systems For Woodworking

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

POWERTEC 70275 3-Way Dust Collection Fitting w/Y Shaped Design for 4 in Hose & Cuff

  • INCLUDES: (1) 3-Way Junction Dust Collection Fitting.
  • FUNCTION: Allows you to connect up to three individual dust collection tools or machines to one portable dust collector without having an expensive piping system set-up.
  • COMPATIBLE: This 3 way splitter features a y-shaped design with 4” nominal, actual 3-29/32”OD inlet and outlet ports (accepts most 4” ID dust collection hoses and flexible tubing). Please note that a blast gate and/ or hose clamp may be required for direct machine connection (not included).
  • VERSATILE: Works well with most dust collection tools and accessories, including band saws, belt sanders, table saws, jointers, planers and more.
  • QUALITY: This dust collector adapter is made with super durable ABS plastic, known for it’s resistance to scratches, high impact and heat.
Check Stock

POWERTEC 70282 4-Inch Dust Collection Hose Floor Sweep Accessories Kit

  • ACCESSORY KIT: Dust Collection Floor Sweep, 4”x36” Clear Dust Pipe, Removable Grate, Quick Connect Coupler and Handle Assembly (dust hose not included).
  • FUNCTION: Floor sweep attachment, dust collector pipe and fittings quickly eliminates saw dust, small woodchips and other debris from your workshop floor for a cleaner and safer working environment.
  • COMPATIBLE: This versatile assortment of dust collection fittings possess a 4” nominal (ID or OD), a perfect fit for any standard 4-inch flexible dust collection hose.
  • ERGONOMIC DESIGN: Adjustable handle easily allows you to position your grip and angle the floor sweeper to accomodate your specific project and space requirements.
  • MOUNTING: Includes (1) mounting bracket and (2) #8 pan head wood screws.
Check Stock

POWERTEC 70322 4 to 2-1/2 Reducer and 4 Dust Control Flex Cuff with Hose Clamps

  • INCLUDES: (1) 4” to 2 1/2” Dust Collection Hose Reducer & (1) Flexible Hose Cuff Coupler with (2) Dust Hose Clamps.
  • REDUCER'S FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop....
  • FLEX CUFF'S FUNCTION: Provides a perfectly sealed, airtight connection between a pair of 4 inch OD dust collection equipment ports, hoses or fittings.
  • PREMIUM BUILD: Reducer made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection.....
  • DIMENSIONS: Reducer - 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID.
  • 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.....
Check Stock

PSI Woodworking TSGUARD Table Saw Dust Collection Guard

  • Ideal solution for table saw safety and dust control.
  • Connected to your dust collection system, it captures the dust thrown up by your table saw blade.
  • Adjusts easily to suit thickness of material being cut.
  • Can be mounted to ceiling for maximum clearance.
  • Easily swings out of the way if not needed for certain cutting jobs.
  • Connects to any standard 4" dust collection hose or ductwork.
  • Replacement clear dust collection hood is available (TSGUARD-DH).
Check Stock

BOSCH HDC300 SDS-Max and Spline Hammer Dust Collection Attachment

  • Chiseling dust collection shroud - focuses air suction from the vacuum around the chisel for maximum dust collection.
  • Unique ski-boot style clamping band - provides easy installation and adjustment onto the hammer tube.
  • Adjustable metal extension arm - provides easy adjustment for proper positioning around the chisel and can also accommodate different chisel lengths.
  • 3-piece adaptor set - allows the chiseling dust collection attachment to be installed on different size hammers.
  • 1-3/8-Inch dust port fits Bosch dust extractor vacuum nozzles.
Check Stock