Reviews Ductile Valve

PTNHZ Aluminum Car 60MM Vband V60 Flange Turbo Wastegate Compatible with BMW Subaru Honda

  • Universal fitment for turbo with 60mm sizing to fit the wastegate.
  • Ductile cast iron valve body to resist extreme temperatures and warping.
  • White Normal Packing Box With Foam Protected.
  • Includes 11 psi, and 22 psi springs (combination of 33 psi).
Check Stock

Check Valve 3-Port Brass Male Threaded Air Compressor Check Valve Central Pneumatic Air Compressor Accessories Air Compressor Replacement Parts (Female Thread)

  • Oversized air filter/silencer is 99.7% efficient at 2 microns, delivering clean, contaminant free air to the pump.
  • The head and valve plate is an advanced design that features Viton high temperature O-rings for leak proof sealing.
  • Pistons feature 3-piece ring set for excellent oil control.
  • Two-piece connecting rods include needle bearings for high load capabilities and long life.
  • The crankshaft is fabricated of ductile iron and is optimally balanced for smooth, low vibration operation.
Check Stock

Campbell Hausfeld 80 Gallon Vertical Two-Stage Air Compressor, 17.2CFM, 3PH (CE7051)

  • 80 Gal. tank, 17.2 CFM at 90 PSI, 175 max PSI, 208-230/460-Volt, 14.2-12.8/6.4 Amp, 3 phase, 60 Hz.
  • Compressor features a commercial duty oil-lubricated, 2 stage pump designed to deliver more than 15,000 hours of operation.
  • Pump head & valve plate feature an advanced design with Viton(r) high-temperature O-rings for superior high-pressure sealing when compared to paper gaskets.
  • For smooth, low-vibration operation, the crankshaft is fabricated of ductile iron and optimally balanced.
  • bundle this unit with a Campbell Hausfeld 50 ft. Air Hose (PA121600AV), 17 Piece Accessory Kit (MP284701AV), and the 3-in-1 inflation gun, chuck and gauge (MP600000AV).
Check Stock

K Tool International 12 Ton Short Bottle Jack (Welded Type); Heat Treated Screws and Saddles, Wide Base, Lift Range 7.48\ to 13.78\

  • [LIFTING RANGE]- With a lifting Range of 7.48" - 13.78" it is perfect for a variety of jobs in your garage or shop.
  • [RAM EXTENSION SCREW]- The ram extension screw adjusts low height to get full use of ram travel and maximum effciency.
  • [CAPACITY]- 12 Tons capacity for a variety of jobs in the garage or shop.
  • [BYPASS VALVE] - Load-limiting and bypass valves prevent against over loading and over extension.
  • [IRON BASE] - Ductile iron hydraulic base for added strength and reliability.
Check Stock

COGNATIVE 5-Inch Heavy Duty Bench Vise Ductile Iron Bench Vise 360° Multi-Purpose Bench Vise with Anvil, Clamp force 4000KG, Blue

  • Durability and Sturdy -- our bench vise is made from high-strength Ductile iron 60,000 PSI, Blue fine powder coated body, zinc plated spare parts for long time use.
  • Ductile Iron body for stronger Clamping Force: 4000kg(8800lbs).
  • Specification -- Jaw width: 125mm(5"), Opening:125mm(5"), Throat Depth:67mm(2-5/8").
  • Applicable Scene -- This 5" heavy-duty professional bench vise is suitable for use in the workshop, great for woodworkers, fitters, etc., and this bench vise can hold wood, aluminum alloy, steel, plastic and other materials.
  • Easy Using -- There are straight scale and round scale on our ductile iron bench vise body for more precise positioning works, easy mounting on the bench with 360-degree swivel base.
  • Customer Service -- We are committed to providing customers with satisfactory products and services. If you have any questions about the products, please contact us, and we will reply to you as soon as possible.
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

Powerbuilt 4 Ton Ratchet Jack Stand - 647529, Red

  • Precision 4 ton jack stands with a lifting range of 13 in. to 20-1/4 in..
  • Strong heavy duty stamped steel with fully welded seams.
  • Dependable ductile iron masts with 10 different height settings.
  • Innovative wide-angle four point stance for extra stability.
  • Stylish and affordable Powerbuilt products meet or exceed ASME and PALD standards.
  • Four point wide stance for maximum stability.
  • Heavy duty stamped steel frame with fully welded seams.
  • Ratcheting ductile iron masts offer 10 height settings.
Check Stock

IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

Bessey CM34DR 3-Inch x 4-1/2-Inch Malleable Deep Reach C Clamp, Black and red

  • Designed for light general purpose & DIY projects.
  • Drop forged frame with bright Galvanized finish.
  • Swivel pad moves freely to adapt to various surfaces.
  • Extra deep throat allowing a wider variety of applications.
  • High tensile ductile body with hardened spindles and pads.
Check Stock

Steel Dragon Tools® 74227 H4 Hinged Pipe Cutter 2\ - 4\ Capacity Fits REED® and RIDGID® Cutter Wheel

  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I 03122 cutter wheels (included a.
  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I  03122 cutter wheels.
  • Full-closed frame for maximum efficiency under minimal effort..
  • Guide fingers ensure accurate wheel alignment for even cut..
  • Steel Dragon Tools H4 will accept compatible Reed cutting wheels..
Check Stock