Reviews Dual Ring Scope Mount

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 30 mm Diameter

  • Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes.
  • Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Mounts to any flat top Picatinny rail equipped rifle platform.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
Check Stock

Monstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter | Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the Post 9/2021 compatible mount..
  • Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform.
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ,Absolute Co-Witness

  • ✌【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring.
  • 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring..
  • ✌【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock