Reviews Duahead 3d Printers 2

Amazon Basics PETG 3D Printer Filament, 2.85mm, White, 1 kg Spool

  • 3D printer filament (2.85mm diameter, white.
  • designed to fit most common 3D printers (check spool size for compatibility).
  • Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS).
  • offers easy bed adhesion, stiffness, and a glossy-type finish.
  • resealable storage bag included to protect filament between use.
  • keep filament dry and away from UV light.
  • Backed by an AmazonBasics 1-year limited warranty.
  • Please make sure your printer supports 2.85mm filament before buying this filament. This filament is supported on all 2.85mm open standard 3D printers. Verify your printer before purchasing to avoid unnecessary returns..
Check Stock

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

  • Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/47 inches..
  • Recommended parameters for the thermistor: R25℃=100K.
Check Stock

Msunlord TPE 3D Printer Filament, 95A TPE 2.85mm (Accuracy +/- 0.05mm) Flexible 3D Printing Filament, 0.95Kg Spool, Blue for 3D Printers or 3D Pens

  • 0.95Kg 2.85mm TPE（Thermoplastic polyurethanes）3D printer filament.
  • Recommended Extrusion/Nozzle Temp: 200°C - 220°C (392℉~ 428℉)，Heated Bed Temp: 60°C - 80°C (140℉~ 176℉).
  • Design and manufactured in compliance with the requirements of EU REACH, RoHS. Eco-friendly, non-toxic, harmless..
  • HIGH PERFORMANCE: Low-Odor, Low-Warp, good tensile strength and ductility. Much more strong than PLA, ABS printer filament in toughness..
  • WIDELY COMPATIBLE: Compatible with 3D printers and 3D pens that use 2.85mm filament, fit for almost all popular brand 3D printers on market..
Check Stock

PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Blue

  • ①【PLA+ Advantages】→ PLA+ filament is stronger than PLA, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion..
  • ②【Spool Diameter】→ Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on many 3D printers..
  • ③【1.75mm Diameter】→ Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it’s suitable for almost all 1.75mm FDM 3D printers..
  • ④【Recommend Settings】→ We recommend printing at a Nozzle/Extrusion temperature of 210°C – 235°C (410°F – 455°F) and Bed/Platform temperature of 70°C – 80°C (158°F – 176°F)..
  • ⑤【Professional Team】→ SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team..
Check Stock

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

  • HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/39.4 inches.
  • Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.
Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Cool White

  • ...has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry free to purchase..
Check Stock

Geeetech PLA 3D Printer Filament, 1kg Spool (2.2lbs), 1.75mm Dimensional Accuracy +/- 0.03mm, Silver

  • ✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
  • ✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Silver Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc.
  • ✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers..
  • ✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament..
  • ✔️【100% Satisfaction Warranty】GEEETECH provides 100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME..
Check Stock

JAYO 3D Printer PLA Filament, 1.75mm PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM Printers, PLA Candy Red

  • 【More easier & Smoothly & Odorless】JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
  • 【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【12 Months Warranty & Friendly After-Sales Service】 N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!.
Check Stock

Octave Blue ABS Filament for 3D Printers - 1.75mm - 1kg Spool

  • ...ith PLA, and have more in common with mass-produced plastic models and parts. Octave ABS can be sanded, glued, and painted, as well as post processed in an acetone vapor bath for a smoother, glossy finish..
  • WIDE COMPATIBILITY - Octave ABS filament prints at temperatures from 210-250℃, so it works well with most 3D printers that support 1.75mm ABS filament, like Raise3D, ZMorph, Afinia, FlashForge, Creality, Fusion3 F410, UP, PrintrBot, MakerGear, Solidoodle, CraftBot, and others (80-120℃ heated print bed strongly recommended, external spool holder may be required—always check your printers’ specifications)..
  • SPECIFICATIONS - Color = blue, Material = ABS, Filament diameter = 1.75mm, Print temperature = 210-250°C, Recommended print bed temperature = 80-120℃, Spool capacity = 1kg (2.2lb), Filament length = 400m (approximate), Reel diameter = 16cm (6.30”), Reel width = 9cm (3.54”), Hub diameter = 3.5cm (1.38”), Hub width = 8.5cm (3.35”).
Check Stock

JAYO 3D Printer PLA Filament, 1.75mm Twinkle PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM 3D Printers, PLA Twinkle Black

  • ...has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry free to purchase..
Check Stock