Reviews Dso13mini Oscilloscope

DSO 138 Mini Oscilloscope DIY Kit w/Clip Probe by Nooelec. Low Cost Portable Digital Storage Oscilloscope with 2.4

The DSO138mini is an upgraded version of the popular DSO138 DIY oscilloscope kit.
All parts required for completion are included, along with assembly instructions and a user manual.
The scope can run on USB or a single cell 3.7V Li-ion battery.
The overall size of DSO138mini is only 2/3 of DSO138, so it is much more suitable for hand-held operation.
There are a variety of other improvements, which can be viewed in the full description that appears below.

Update From kuman 13803KThe sensitivity of DSO Shell oscilloscope has been extended in both directions and is higher and wider than DSO138 oscilloscope. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
More Applications Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications..
Rotary encoder has been added It makes parameter adjustment much quicker and easier..
DSO Shell comes with full enclosure The front panel and top/bottom brackets are flexible for easy user modification..
Detailed InstructionDetailed assembly instructions are provided in combination with troubleshooting guide and schematic..

Upgrade Version: DS213 is the latest oscilloscope in the family of SainSmart DSO oscilloscope. Compared with DSO203, DS213 upgrades its analog bandwidth to 15MHz (DSO203 is 8MHz) and max sample rate to 100MSa/s (DSO203 is 72MSa/s).
Color Display: The bright color display presents any measured AC current, including sine, square, sawtooth, and triangle waveforms..
Simple to Use: Operation is simple and easy, using taps and swipes much like any smartphone..
Portable: Its small form factor conveniently fits inside any pocket so it's always ready when you need it..
Easy Saving: The built-in 8 MB flash storage makes saving and transferring waveform images easier than ever..

Upgrade Version: DS213 is the latest oscilloscope in the family of SainSmart DSO oscilloscope. Compared with DSO203, DS213 upgrades its analog....
Color Display: The bright color display presents any measured AC current, including sine, square, sawtooth, and triangle waveforms..
Simple to Use: Operation is simple and easy, using taps and swipes much like any smartphone..
Portable: Its small form factor conveniently fits inside any pocket so it's always ready when you need it..
Easy Saving: The built-in 8 MB flash storage makes saving and transferring waveform images easier than ever..

DSO Shell is a budget-friendly, beautiful, portable oscilloscope with 2.4" color TFT LCD!.
Includes a 1x/10x BNC oscillscope probe and enclosure. FULLY ASSEMBLED! Just add a power supply and start testing!.
DSO150 has similar bandwidth as DSO138 but contains significant improvements in structure, mechanics, and operation.
DSO150 runs on 9V power supply (do not use voltage higher than 10V!) The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided to connect to different power sources.

Dso138 2. 4" Tft 1msps digital oscilloscope kit for DIY it's easy to solder..
Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly.
It uses 2. 4-Inch tft lcd (320 x 240 dot-matrix, 262K colors) as its display element and displays nice.
Detailed assembly instructions are provided in combination with troubleshooting guide and schematc..
7-24 friendly customer service provided..

This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..

200MHz, 4-channel, DSO, Spectrum analyzer, dual channel 25MHz AWG, 5,000 count DMM and power supply.

Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included..
DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation.
We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec’s or JYETech’s website.
Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase.
24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise.

Hantek amp clamp AC/DC frequency range: Up to 20 kHz.
hantek cc65 Effective Measurement Range: 20mA to 65A DC.
The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO.
Hantek CC-65 amp clamp is Friendly in use: turn on, clamp it over a conductor, and get a reading.
The current probe is with Output: BNC connector.