Reviews Drywall Snap Toggle Bolt

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

The Hillman Group 370039 Toggle Bolt, 1/8X2-Inch, 50-Pack

  • Durable toggle bolt great for hanging and fixing objects on hollow wall..
  • Size: 1/4x3-in (1/4 inch bolt diameter, 3 inch long). Requires a 3/4" drill bit..
  • Zinc-plated carbon steel to resist corrosion in wet environments.
  • Package: 8 pieces toggle bolts,comes with spring-action wings and instruction..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

Lenink 24 Pcs Toggle Bolt and Wing Nut Kit, Zinc Plated Steel Round Head Butterfly Drywall Anchor 1/4\ 3/16\ 1/8\ for Hanging Lamps, Curtain Rods, Photo Frames

  • ♛【What You Get】: In this toggle bolt kit, it include three most used size which are 1/8'' x 30pcs, 3/16'' x 20pcs, 1/4'' x 10pcs total 60pcs are packed in a durable plastic box, convenient for your use and storage..
  • ♛【Product Material】: All the toggle bolts are made of high quality carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items. Zinc plated on the surface make the product appearance is exquisite..
  • ♛【Spring Wing Design】: Collapsible spring-loaded wings desigh allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation..
  • ♛【Easy to Install】: First pre-drilled hole for installation, and then poke these toggle bolts through the hole. Then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, use an screwdriver to screw the bolt in..
  • ♛【Wide Application】: These Toggle bolts can be widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TCH Hardware 10 Pack Toggle Bolt 3/16' x 2' + 4' Slotted Drive Screws - Drywall Sheet Rock Anchor Hollow Wall Butterfly Spring Loaded Wing

  • Steel slotted drive machine screw - 10-24 x 4".
  • Perfect for mounting on drywall and hollow walls.
  • Wings lock into place behind wall for superior holding power..
Check Stock

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range for 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock