Reviews Drive Cage Adapter

SMALLRIG Monitor Cage for Atomos Ninja V,Built-in NATO Rail and HDMI Cable Clamp Monitor Cage 2209

  • ???? Multiple Threaded Holes: SMALLRIG Ninja V Cage for Atomos mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side. Across the top and bottom the cage features multiple 1/4’’-20, 3/8’’-16 holes, and a locating mount point for ARRI on the base.
  • ???? Built-in NATO Rails: NATO rails are also provided along on both top and bottom to allow use with a range of SMALLRIG mounts such as SMALLRIG Ball Head Magic Arm 2071 or the 2072 for quick release.
  • ???? HDMI Cable Clamp: Includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SMALLRIG HDMI Cable Clamp 1693 for the HDMI output. It is attached on the left to protect the HDMI cable and port.
  • ???? Drive Locks: For backwards compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the cage’s form factor.
  • ???? Attachment Points: SMALLRIG ninja v cage features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.
Check Stock

Tiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)

  • ...n to comfortably handle and operate your camera system..
  • The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
  • [RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port..
  • [15MM ROD SUPPORT] When Using Battery Grip Extension Bracket.An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup..
Check Stock

SmallRig GH5 GH5S Cage for Panasonic Lumix Camera and DMW-XLR1 (Upgraded Version)-CCP2646

  • ...ra body perfectly and will not block any access to the SD card slot, battery compartment, and all camera controls. Additionally, on the right side of cage is an eyelet for wrist strap for your convenience..
  • 【MOUNTING POINTS】The integrated cold shoe on the top could attach microphone or accessories with cold shoe adapter. It also features NATO rails on both sides for mount NATO accessories such as NATO Clamp to Arri-standard Rosette 2046 and then Wooden Handgrip 1941 for quick release. Cold Shoe 1241 could be mounted on the cage via 1/4’’ and M2.5 threaded holes for microphone, LED lights and so on..
  • 【RELATED RIGS】 There are abundance of 1/4’’ and 3/8’’ threaded holes for accessories, such as QR plates for Manfrotto and Vinten or Quick Release Baseplate Kit 2035. HDMI Lock 1822 could be mounted on the side via 1/4’’ threaded hole for the protect camera HDMI port. Lens Adapter Support 2016 could be mounted at the bottom of cage to support Metabones lens adapter..
Check Stock

ToBa Toe Cages for Peloton BiKe & BiKe+ Pedals Compatible Toe Cage Adapters - Convert LooK Delta Pedals on Indoor Exercise BiKe Pedal to Toe Clip Straps - Ride with SneaKers, One Size

  • Excellent Non-Slip & Anti-Breaking: In order to prevent the toe cage pedals from breaking, the pedal cages adopt 74 anti-skid particle bumps to increase the anti-skid force area, effectively preventing the toe clip pedals from falling off and straining the foot..
  • Easy to Switch: Just tighten the adapter to your sneakers and clip the adapter into the pedals, you can ready to exercise. With our provided tool, the bike pedal adapter can be easily released by loosen the tension screw on the pedal. Makes your feet feel more comfortable and labor-saving when riding! NOTE: Please install the turnbuckle with the dot mark on the top position (Find the dot mark on the back of the screw)..
  • Package Includes: 2x TOBA Toe Cage Adapters, 1x Allen Wrench for both toe cage position adjustment and installation. If you have any product issues, we're glad to either Refund or Replace your current item..
Check Stock

Boerte Toe Cages for Peloton Bike & Peloton Bike+ Pedals Compatible Toe Cage Adapters - Convert Look Delta Pedals on Indoor Exercise Bike to Toe Cages and Straps - Ride with Regular Shoes

  • ✅ [Great Alternative to Cycling Shoes]- Boerte Look Delta pedal to toe cage and strap adapter is specifically designed for spin bike users....
  • ✅ [Pedaling with Confident] – All Boerte toe cages are supplied by a leading bike pedal manufacturer. Unlike other adapters which could be snapped....
  • ✅ [Easy to Switch]- Ready to exercise by simply strap and tighten the adapter to your sneakers and clip the adapter into the pedals. The adapter can....
  • ✅ [Optimized Geometry] –The adapter is solely developed based on PELOTON version of Look Delta system. 3-screw mounting plate design allows the....
  • ✅ [Package Includes]- 2x Boerte Toe Cage Adapters, 1x Allen Wrench for both toe cage position adjustment and installation..
Check Stock

SmallRig Hero11 Cage / HERO10 Black Cage / HERO9 Cage for GoPro with 2 Cold Shoe Mounts for Mic and Led Video Light for GoPro Hero 11 / 10 / 9 Black 3083B

  • For GoPro HERO 11/10/9 Black: The Cage 3083 is an all-in-one full cage which is compatible with microphones, LED lights, providing a perfect Vlog filming solution..
  • Dual Cold Shoe Mount: The cage comes with cold shoe mount on the top and right side, which can connect with microphone and led video light at the same time..
  • Moulded Design: The cage fits the camera so well that it does not block the screen, buttons and USB-C port. It can be quickly locked by pressing the cover and released by pushing the button..
  • Compatible with Audio Adapter: The bottom bracket can be installed with the original microphone adapter, and the side plate can be replaced by the original side plate of the camera, which supports audio recording while charging.
  • Quick Installation & Removal: The audio adapter bracket can be quickly installed or removed, and the original interface of the cage can still be used after the bracket is removed. The bottom of the bracket has a dedicated interface for GoPro, which can be easily installed on original accessories for GoPro..
Check Stock

Lenovo ThinkPad X220 42963L5 12.5' LED Tablet PC - Core i7 i7-2640M 2.80GHz - Black (42963L5)

  • Vibrant 12.5" WXGA HD anti-glare LED backlit 16:9 Widescreen.
  • Magnesium Aluminum allow roll-cage chassis.
Check Stock

Alloy Steel Hard Drive Cage,Steel Plate Cage Hard Drive Tray Rack with Fan Space,Adapter Rack Bracket SATA 5.25\ to 5X 3.5 Rack PC Supplies for Computer SAS

  • It fits for PC Case which CD-ROM Slot Inwall is flat, or Bracket Installation Type CD-ROM Slot, Some PC case special design may not support this Hard Drive Rack, then you can only DIY your PC Case or use it External, please note before buying.
  • Heat Dissipation:With 1x 12cm cooling fan Install slot space.Can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
  • Perfectly fitting with the optical drive bay, accurately locating the site of case, hard drive and screw hole, easily expanding storage capacity..
  • Holding 5x 3.5 With Cooling Fan Install Lock space. Hard Drive Cage Drawer Rack Bracket.
  • Package included: (Fan and Hard Drive are not included) 1 set x HDD Hard Drive Cage Rack..
Check Stock

Ebike Conversion Kit for Battery Adapter Frame Mount, Aluminum Black

  • 【Open Slot】Our electric bike conversion kit with open slot, that allows fit the adapter onto the frame with the bottle cage hole. Position can be adjusted along the slot so that the bigger battery should be able to fit in the frame..
  • 【Material Size】The ebike kit battery pack adapter is made of 6061-T6 aluminum and assembled with stainless steel hardware. Size:202×20×9mm. Weight:61g. Zip tie cutting width:14mm. Hollow carved design and chamfer for light weight..
  • 【14mm Stainless Steel Hose Clamp】Two 14mm wide stainless steel hose clamps enhance the bearing capacity and firmness. The elastic design can be adjusted and is suitable for bicycle frames of different thicknesses. Attached the sponge pad can prevent damage to the frame..
  • 【Threaded Holes】Our battery hold down mount have the same distance compare with bottle cage hole. A battery pack of normal size and weight can be installed, or fit anther bottle cage for smaller range extension bottle battery ebike..
  • 【PACKAGE INCLUDE】1×bottle battery adapter, 4×M16 hardware screw, 2×hose clamp, 3×protective pad(protect frame painting)..
Check Stock

MAGICRIG Camera Cage with Top Handle Grip for Sony A7RIII /A7III /A7M3 Camera to Quick Release Extension Kit New Version

  • Protective DSLR camera cage kit for Sony A7RIII /A7III /A7M3. It allows enables shooting at multi-angles and can be handheld easily..
  • It allows to mount HDMI-compatible cable clamp to protect HDMI-compatible port. Right strap port, allows to mount strap.This cage of anti-twisting and....
  • Double locking - The cage equipped with a threaded hole that matches the eyelet and secures the M2.5 screw to the eyelet to prevent the camera from....
  • The Top of the cage features 2 cold shoes, 3/8'' and arrays of 1/4'' threads. Two lens adapter ports fits lens adapter support to better sustain the....
  • The cable clamp can be secured on left side of cage, provides the protection of HDMI-compatible port, not make a damage of cable plug. Reserved camera....
Check Stock