Reviews Drill Bit For Slate Tile

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

ZRM&E 8pcs 14mm Laboratory Keck Clamp Plastic Lab Keck Clips for Glass Standard Conical Interface Clip Ground Glass Joint, Green

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Baban Diamond Drill Bits,10Pcs Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble, 6-32mm Hand Tools

  • ✔ Satisfied Size - 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86", 26mm/1.02", 32mm/1.26".
  • ✔ Ideal Application - This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.They are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate Mable, granite light stone.
  • ✔ Super Material - These diamond drill bits made of high-speed steel that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole..
  • ✔ Sharp&Smooth Cut - Coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
  • ✔ Note - When you using the diamond drill bits, please use lubrication (water),otherwise the diamond core drill will burn.Not for use on Concrete or for depths beyond ab....
Check Stock

JOHOUSE Diamond Drill Bit Set, 10PCS Hole Saw Set for Granite Stone, Glass, Porcelain, Marble

  • 【10 Sizes】- Drill bit set comes with 10 different sizes - 6/ 8/10/12/14/16/18/20/22/30 mm, can meet your different needs.
  • 【High-Quality & Durable】 - Our diamond drill bits are all made of high-strength carbon steel, coated with a nickel-plated layer, rust-resistant and corrosion-resistant, designed for the long-term using.
  • 【Flawless Performance】 - Diamonds on the tip of the bit, ensuring smooth punching and making the drilling process easier, precise cutting without rough edges.
  • 【Perfect Design】 - The side slots on the bit's body can help the entry of cooling water and the ejecting of debris from the borehole. When debris gets stuck in the hole saw. You can use the mini screwdriver to pull it out.
  • 【Widely Applicable】 - Our drill bits are perfectly compatible with ceramic, glass, tile, porcelain, marble, slate, granite stone, etc.
Check Stock

uxcell 115mm Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

  • SIZE - 115mm(4.5-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter..
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Side open can remove the waste to keep the drill bit clean. (Needs to be used at a low speed, about 800-1000 RPM.
  • Please add coolant liquids or water when processing).
  • APPLICATIONS - Perfect for drilling Glass, Tile, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Marble, etc..
Check Stock

PHITUODA 15pcs 5/16-Inch / 8mm Diamond Drill Bits, Small Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • Package Included: 12 x Diamond Drill Bits. Cutting Hole Diameter is 5/16" / 8mm, Shank Diameter is 7/32" / 5.49mm, Total Length is 2" / 50.9mm..
  • Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life..
  • Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • Multiple Applications: The diamond drill bit can remove a complete 8mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the cu....
Check Stock

PHITUODA 6 Inch / 150mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 6" / 150mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.22" / 56.35mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 150mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you ....
Check Stock

PHITUODA 1-3/4 Inch / 45mm Diamond Drill Bits, Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 1-3/4" / 45mm, Shank Diameter is 3/8" / 9.8mm, Total Length is 2.18" / 55.4mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 45mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you....
Check Stock

PHITUODA 4-1/2 Inch / 115mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 4-1/2" / 115mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.19" / 55.6mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 115mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident y....
Check Stock

uxcell 45mm Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

  • SIZE - 45mm(1.8-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter..
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean..
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed.
  • Always use lubrication (water) when processing, otherwise the hole saw will burn.).
Check Stock